MP Vyapam Civil - Sub Engineer Mock Test - 4 Free Online Test 2026

The Legislative Assembly of the concerned State recommends the Parliament for the production of the Legislative Council in the state.

A first of its kind conference on the contemporary relevance of the Bhagvad Gita was held London, United Kingdom. The conference was organized by Indian Council of Cultural Relations (ICCR) and High Commission of India. It was organized in collaboration with the Department of the Study of Religions at the School of Oriental and African Studies (SOAS), University of London.

4 x 4 = 16
3 x 27 = 81
25 x 5 = 125
Hence option C is correct.

In the above coding system, each consonant is replaced by its next letter in alphabetical order and each vowel is replaced with the next vowel (A, E, I, O, U). Therefore, ‘GRADE’ will be coded as ‘HSEEI’.

From the given information, it is clear that “I” and “YOU” are common words. So, the common words in the coding language will be the codes for “I” and “YOU”.

Therefore,

I = LU

You = SA

मोहन ने सोहन को किताब दी, में संप्रदान कारक है। संप्रदान का अर्थ है- देना। अर्थात् कर्ता जिसके लिए कुछ कार्य करता है, अथवा जिसे कुछ देता है उसे व्यक्त करने वाले रूप को संप्रदान कारक कहते हैं।

अव्यय के पांच भेद होते हैं: क्रिया-विशेषण अव्यय, संबंधबोधक अव्यय, समुच्चयबोधक अव्यय, विस्मयादिबोधक अव्यय, निपात अव्यय।

'शनि' पुल्लिंग शब्द है।

Pyorrhea is an advanced form of gum disease that causes damage and infection to the bones surrounding the teeth. It leads to pus formation and loosening of the teeth.

Characters, sections and paragraphs grouping works when text formatting in word.

Formatting Text: Word deals with formatting on three levels encompassing small and specific on up to big and broad—through characters, paragraphs, and sections. You apply different types of formatting to each of these parts. Character formatting includes selecting a font, a font size, bold or italics, and so on. At the paragraph level, you apply indents, bullets, and line spacing. For each section of your document (even if there's only one), you set the page size, orientation, and margins.

Prolog, Python, Lisp, Java, and C++ are major AI programming language used for artificial intelligence capable of satisfying different needs in development and designing of different software.

A, B, C are the angles of triangles.
⇒ A + B + C = 180°
⇒ A + B = 180° - C
⇒ tan (A + B) = tan (180° - C)

⇒ tan A + tan B = - tan C (1 - tan A tan B)
⇒ tan A + tan B + tan C = tan A tan B tan C
Dividing the equation by tan A tan B tan C
Cot B cot C + cot C cot A + cot A cot B = 1
Now from given option
tan 45° = 1

The ratio of efficiency = A : B
= 100 : 180 = 5 : 9
The Ratio of time taken by them = 9 : 5
Let pipe A and B fill the tank alone in 9x hours and 5x hours respectively.

45x = 630 ⇒ x  = 14
Time is taken by pipe B to fill the alone tank = 5x = 70

Mass = Volume x Density
Volume = 1/2 x 10 x 12 x 20 = 1200

Weight = Kg

The cost price of the milk = Rs.2
The selling price of milk = Rs. 1/2 
Therefore,
 % Loss = (2- 1/2)/2 x 100 = 75%

For a point mass, the Moment of Inertia is the mass times the square of the perpendicular distance to the rotation reference axis and can be expressed as.
I = mr²
Unit for mass is Kg
Unit for distance is metre.
Unit for moment of inertia will be kgm²

Fixed end moment due to a point load P acting at the midpoint of beam having length L is .

The Reynolds number for pipe flow is defined as Re = DVρ/μ, where D is the pipe diameter, V is the average flow velocity in the pipe, ρ is the density of the flowing fluid and μ is the dynamic viscosity of the flowing fluid. Re is a dimensionless number.

For shear stresses factor of safety is taken as 2.5.

The shear force coefficient for dead and imposed load fired at support next to the end support at inner side for continuous beam is 0.55.

Shishum trees yields hard wood.

Hence option C is correct.

Classification of Dry docks: Dry docks are classified in the following five categories: Graving or dry docks, Floating dry dock, Marine railway dock, Ship lift dry docks, Slip ways.

The minor principal stress is equal to cell pressure. The major principal stress is equal to the sum of the cell pressure and the deviator stress.

The water utilizable by plants in form of Capillary water.

Hence option C is correct.

If H is the total head at inlet and h is the head loss due to friction, efficiency of power transmission through a straight pipe is given by H−h/H.

In a hydraulic jump, the depth on its two sides is 0.3 m and 1.2 m. 0.8m jump leads to loss of head.

Hardwood is generally obtained from Deciduous tree and softwood is obtained by Coniferous tree.

Examples of Hardwoods are

Oak, Sal, Teak, Babul, Mahogany, Shishum, etc.

Examples of Softwoods are

Chir, Deodar, Pine, Spruce, Kael (Botanical name - Pinus Wallachian), etc

Wood obtained from coniferous trees is soft, lightweight, weak and resinous. Hence is of limited engineering application.

Wood obtained from deciduous trees are hard, strong, heavyweight and not resinous. Hence it is suitable for engineering application.

Column strip means a design strip having a width of 0.25I, but not greater than 0.25I, on each side of the column center-line, where I is the span in the direction moments are being determined, measured center to center of supports.

The effective width of a column strip of a flat slab is taken half the width of the panel.

If the size of a column is reduced above the floor, the main bars of the columns,

continues up, bend inwards at the floor level, stops just below the floor level and separates lap bars provided. Hence option D is correct.