Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  MPPGCL JE Civil Mock Test Series 2025  >  MPPGCL JE Civil Mock Test - 7 - Civil Engineering (CE) MCQ

MPPGCL JE Civil Mock Test - 7 - Civil Engineering (CE) MCQ


Test Description

30 Questions MCQ Test MPPGCL JE Civil Mock Test Series 2025 - MPPGCL JE Civil Mock Test - 7

MPPGCL JE Civil Mock Test - 7 for Civil Engineering (CE) 2024 is part of MPPGCL JE Civil Mock Test Series 2025 preparation. The MPPGCL JE Civil Mock Test - 7 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The MPPGCL JE Civil Mock Test - 7 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for MPPGCL JE Civil Mock Test - 7 below.
Solutions of MPPGCL JE Civil Mock Test - 7 questions in English are available as part of our MPPGCL JE Civil Mock Test Series 2025 for Civil Engineering (CE) & MPPGCL JE Civil Mock Test - 7 solutions in Hindi for MPPGCL JE Civil Mock Test Series 2025 course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt MPPGCL JE Civil Mock Test - 7 | 100 questions in 120 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study MPPGCL JE Civil Mock Test Series 2025 for Civil Engineering (CE) Exam | Download free PDF with solutions
MPPGCL JE Civil Mock Test - 7 - Question 1

Find the number which is common to all three figures.

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 1

In the question, We have to find the common to all three figures which is shown below-

Here, The highlighted area is common to all shapes.

Hence, Option (3) is correct.

MPPGCL JE Civil Mock Test - 7 - Question 2

P is 6 km west from point Q. Point R is 4 km north to point Q. S is 12 km south from point R. Now point S in which direction and how far from point P?

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 2

As per the given information;

Distance between S and P = √(PQ2 + QS2)
SP = √(62 + 82)
SP = √(36 + 64)
SP = √100
SP = 10 km
Hence, S is 10 km in South-East with respect to P.

1 Crore+ students have signed up on EduRev. Have you? Download the App
MPPGCL JE Civil Mock Test - 7 - Question 3

Direction: If a Paper (Transparent Sheet) is folded in a manner and a design or pattern is drawn. When unfolded this paper appears as given below in the answer figure. Choose the correct answer figure given below.

Find out from the four alternatives as how the pattern would appear when the transparent sheet is folded at the dotted line.
Question Figure

Answer figure

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 3

If you fold the paper from left to right from dotted line, the left part figure will go in opposite direction. Please take a transparent paper and draw a similar figure and fold it.

MPPGCL JE Civil Mock Test - 7 - Question 4

Direction: In the following questions choose the word opposite in meaning to the given word.

Cultivated

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 4

The word cultivated (Adjective) means: Eductated. It’s antonym should be: Crude 

MPPGCL JE Civil Mock Test - 7 - Question 5

Where was the 1931 session of Indian National Congress held?

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 5
Answer:
The 1931 session of the Indian National Congress was held in Karachi. Here is a detailed explanation:
- The Indian National Congress is a political party in India that played a crucial role in India's struggle for independence from British rule.
- The party holds annual sessions to discuss and plan its strategies and policies.
- In 1931, the Congress session was held in Karachi, which was then a part of undivided India.
- The session was significant as it marked the adoption of the historic "Poorna Swaraj" (Complete Independence) resolution by the Congress.
- The resolution declared the objective of the Indian National Congress to be the attainment of Purna Swaraj by the Indian people.
- The session was attended by prominent leaders of the Indian National Congress, including Mahatma Gandhi, Jawaharlal Nehru, and Maulana Abul Kalam Azad.
- The Karachi session set the stage for the civil disobedience movement and other non-violent protests that followed in the struggle for independence.
Conclusion:
The 1931 session of the Indian National Congress was held in Karachi, where the historic "Poorna Swaraj" resolution was adopted, marking a significant moment in India's fight for independence.
MPPGCL JE Civil Mock Test - 7 - Question 6

In this questions, a number series is given with one term missing. Choose the correct alternative that will continue the same pattern and fill in the black spaces.

Q. 1, 4, 9, 16, 25, (____)

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 6

1st term = 12 = 1
2nd term = 22 = 4
3rd term = 32 = 9
4th term = 42 = 16
5th term = 52 = 25
Thus, Missing number = 6= 36

MPPGCL JE Civil Mock Test - 7 - Question 7

Eight friends- P, Q, R, S, T, U, V and W are sitting around a circular table but not necessarily in the same order. All of them are facing the center. Who is facing V?

Statement I: V is sitting to the immediate left of W. R is sitting 2nd to the left of S.
Statement II: Q is sitting 2nd to the left of T. T is facing P. The number of friends sitting between P and Q is same as the number of friends sitting between P and W.

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 7

From statement I alone, we don’t get the answer.

From statement II alone, Q is sitting 2nd to the left of T. T is facing P. The number of friends sitting between P and Q is same as the number of friends sitting between P and W.


From statement II alone, we don’t get the answer.

Combining both statement I and II, we get,


From statements I and II together, we don’t get the answer.

Hence, option ‘D’ is correct.

MPPGCL JE Civil Mock Test - 7 - Question 8

Directions: In each of the following questions, a sentence has been given in Active (or Passive) Voice. Out of the four alternatives suggested, select the one that best expresses the same sentence in Passive/ Active Voice.

We must respect the elders.

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 8

The sentence "We must respect the elders" in the Active Voice can be transformed into the Passive Voice as:

A. The elders must be respected.

This option accurately conveys the original meaning of the sentence in the Passive Voice.

MPPGCL JE Civil Mock Test - 7 - Question 9

The maximum n permissible shear stress given in BIS 456-1978 is based on

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 9
The maximum n permissible shear stress given in BIS 456-1978 is based on Diagonal compression failure.
MPPGCL JE Civil Mock Test - 7 - Question 10

The effective slenderness ratio of a column fixed at both ends is:

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 10
The effective length of a fixed column, i.e., effectively held in position and restrained against rotation at both ends is 0.65 L/r.
MPPGCL JE Civil Mock Test - 7 - Question 11

Broadly spaced contour lines on a map show that the area is

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 11
Contour lines that are relatively close together indicate a slope that is fairly steep. Contour lines that are further apart indicate a slope that is relatively flat. The area of the map above boxed in orange shows an area that has a fairly steep slope, while the area boxed in purple is a relatively flat area.
MPPGCL JE Civil Mock Test - 7 - Question 12

Net sectional area of a tension member is equal to its gross sectional area -

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 12
The net area at any section is equal to the gross area minus the deduction for holes at that section. The deduction for the hole is the product of the hole diameter and the thickness of the material.
MPPGCL JE Civil Mock Test - 7 - Question 13

Cross–staff is used for-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 13
Cross staff

It is essentially an instrument used for setting put right angles. In its simplest form, it is known as open cross-staff. It consists of two pairs of vertical slits providing lines of sight mutually at right angles.

So cross-staff is used for finding right angles.

MPPGCL JE Civil Mock Test - 7 - Question 14

Coefficient of permeability of soil varies approximately as -

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 14
Factors affecting permeability (K)-

1. Gravity size (K∞D102)

2. Properties of water (K∝γW/μ)

( → ) With increases temperature, viscosity (μ) Decrease; and hence K increases

3. The Void ratio of soil (−K∞e2)

4. Degree of saturation (−K∞S)

5. Shape of particles

(−K∞1/s2) (Specific surface area s= Surface Area/ Volume)

6. Temperature - ( K ) Temp

7. Impurities present in water block the voids, and hence permeability reduces

8. Adsorbed water hinders the flow under gravity. Hence K is reduced.

MPPGCL JE Civil Mock Test - 7 - Question 15

The difference between face left and face right observation of theodolite is 3’. The error is -

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 15
The difference between face left and face right observation of a theodolite is 3’. So the error is 1’30”.

Error is half the difference between the face left and face right observation. This discussion on The difference between face left and face right observation of a theodolite is 3'

MPPGCL JE Civil Mock Test - 7 - Question 16

A circular shaft can transmit a torque of 5kNm. If the torque is reduced to 4kNm, then the maximum value of bending moment that can be applied to the shaft is-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 16

here M=O, here

MPPGCL JE Civil Mock Test - 7 - Question 17

In a pipe when the valve is closed suddenly, then due to high pressure

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 17

During sudden closure of valve, a wave of high pressure intensity will be produced in the water, due to this high pressure circumferential and longitudinal stresses will be produced.

MPPGCL JE Civil Mock Test - 7 - Question 18

Snowcrete is one of the patent forms of-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 18
Snowcrete is one of the patent forms of waterproof cement paint.

Hence the option B is correct.

MPPGCL JE Civil Mock Test - 7 - Question 19

The concrete mix which causes difficulty is obtaining a smooth finish is known to possess.

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 19

The concrete mix that causes difficulty obtaining a smooth finish is known to possess hardness.

Hence the option C is correct.

MPPGCL JE Civil Mock Test - 7 - Question 20

The boundary between the pavement and shoulder in known as:

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 20
Kerbs indicate the boundary between the carriageway and the shoulder or islands or footpaths.

Hence the correct answer is option C.

MPPGCL JE Civil Mock Test - 7 - Question 21

If the thickness of the thinnest outside plate is 20 mm, then the maximum pitch of rivets in tension will be taken as -

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 21
Maximum pitch of rivets in tension = 16t or 200 mm, whichever is less

Here, 16× 20 = 320 mm,

Therefore pitch = 200 mm

Hence the correct answer is option C.

MPPGCL JE Civil Mock Test - 7 - Question 22

If t is the thickness of the thinner plate, the distance between the centers of any two adjacent fasteners shall not exceed.

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 22
The distance between the centres of any two adjacent fasteners shall not exceed 32t or 300 mm, whichever is less, where t is the thickness of the thinner plate.

Hence the correct answer is option A.

MPPGCL JE Civil Mock Test - 7 - Question 23

Slump cone test is used to determine-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 23
Concrete slump test or slump cone test is to determine the workability or consistency of concrete mix prepared at the laboratory or the construction site during the progress of the work. The concrete slump test is carried out from batch to batch to check the uniform quality of concrete during construction.
MPPGCL JE Civil Mock Test - 7 - Question 24

Bernoulli's equation refers to the conservation of-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 24
Bernoulli's equation can be viewed as a conservation of energy law for a flowing fluid. We saw that Bernoulli's equation was the result of using the fact that any extra kinetic or potential energy gained by a system of fluid is caused by external work done on the system by another non-viscous fluid.
MPPGCL JE Civil Mock Test - 7 - Question 25

For completion of a project, the critical path of a network represents-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 25
In project management, a critical path is the sequence of project network activities that add up to the longest overall duration, regardless if that longest duration has float or not. This determines the shortest time possible to complete the project.
MPPGCL JE Civil Mock Test - 7 - Question 26

Radius of gyration is-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 26
Radius of gyration is the Square root of the moment of inertia divided by area.
MPPGCL JE Civil Mock Test - 7 - Question 27

Permissible compressive strength of M 200 concrete grade is-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 27
Permissible compressive strength of M 200 concrete grade is 200 ( km/cm2 ).

Hence the correct answer is option C.

MPPGCL JE Civil Mock Test - 7 - Question 28

The length of the straight portion of a bar beyond the end of the hook should be at least-

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 28
As per IS 456 : 2000, clause 26.2.2.4 (b)

Hence the correct answer is option C.

MPPGCL JE Civil Mock Test - 7 - Question 29

One of the following is not a type of stairs. Mark the same,

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 29
A full turn is not a type of stairs.

Types of stairs:

i) Straight

ii) Turning

iii) Continuous

Turning stairs are sub-classified as:

a) Quarter-turn stair

b) Half turn stair or dog-legged stair

c) Three quarter turn stairs

d) Bifurcated stairs

Hence, the correct option is (A)

MPPGCL JE Civil Mock Test - 7 - Question 30

Which of the following represents Darcy’s friction factor in terms of Reynolds number (Re) for the laminar flow in circular pipes?

Detailed Solution for MPPGCL JE Civil Mock Test - 7 - Question 30

Darcy Weisbach Equation for friction losses in circular pipe

where

L = length of the pipe,

D = diameter of the circular pipe,

V = mean velocity of the flow,

f = Darcy’s friction factor = 4 × F’,

F’ = coefficient of friction

hf = head loss due to friction

For Laminar Flow

Friction Factor

For Turbulent flow

View more questions
20 tests
Information about MPPGCL JE Civil Mock Test - 7 Page
In this test you can find the Exam questions for MPPGCL JE Civil Mock Test - 7 solved & explained in the simplest way possible. Besides giving Questions and answers for MPPGCL JE Civil Mock Test - 7, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)