Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  Environmental Engineering  >  Test: Design of Sewer- 2 - Civil Engineering (CE) MCQ

Test: Design of Sewer- 2 - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test Environmental Engineering - Test: Design of Sewer- 2

Test: Design of Sewer- 2 for Civil Engineering (CE) 2024 is part of Environmental Engineering preparation. The Test: Design of Sewer- 2 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Design of Sewer- 2 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Design of Sewer- 2 below.
Solutions of Test: Design of Sewer- 2 questions in English are available as part of our Environmental Engineering for Civil Engineering (CE) & Test: Design of Sewer- 2 solutions in Hindi for Environmental Engineering course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Design of Sewer- 2 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study Environmental Engineering for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Design of Sewer- 2 - Question 1

Sewer systems can also be referred as _________

Detailed Solution for Test: Design of Sewer- 2 - Question 1

Sewer systems are also referred to as sewerage and can be comprised of storm sewers, sanitary sewers, or a combination of both. Sewerage starts at the building’s drainage system and is transported through sewer pipeline until it reaches a sewage treatment plant.

Test: Design of Sewer- 2 - Question 2

On which of the factors mentioned below, the type of the sewer installed does not depend on?

Detailed Solution for Test: Design of Sewer- 2 - Question 2

Storm water does not act as a distinctive factor for the installation of sewer systems. The type of sewer installed depends upon the terrain, where it is placed and the uses. Sanitary sewers are the most common type of system used to transport wastewater and industrial waste.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Design of Sewer- 2 - Question 3

__________ is required to transport storm water runoff from roofs, parking lots, streets, and highways to a point of discharge.

Detailed Solution for Test: Design of Sewer- 2 - Question 3

There are different types of sewers used based on a type of flow it is designed to carry. Storm sewers are required to transport storm water runoff from roofs, parking lots, streets, and highways to a point of discharge. Storm drainage system helps to minimize flooding and soil erosion.

Test: Design of Sewer- 2 - Question 4

Combined sewer systems are no longer installed due to the water pollution problems they present.

Detailed Solution for Test: Design of Sewer- 2 - Question 4

As combined sewer systems carry both sanitary sewage and storm water, they overflow when storm water rate is high during rainy season. This causes water pollution. However, these sewer systems are still used by older cities located primarily in the Northwest, Northeast, and Great Lakes regions.

Test: Design of Sewer- 2 - Question 5

Which of the following factors mentioned below marks essential for planning sewer systems for a community?

Detailed Solution for Test: Design of Sewer- 2 - Question 5

Planning is needed when designing sewer networks. Calculating the wastewater flow for the community is the most essential factor. The calculation of wastewater flow shows the size of the sewer to be considered.

Test: Design of Sewer- 2 - Question 6

The abbreviation of SUE is?

Detailed Solution for Test: Design of Sewer- 2 - Question 6

SUE stands for subsurface utility engineering. Before SUE, a survey is carried out. It helps contractors locate pipelines and subsurface utilities using a variety of detection tools such as ground penetrating radar and evacuation pipe.

Test: Design of Sewer- 2 - Question 7

Which of these is the most common pipeline installation method?

Detailed Solution for Test: Design of Sewer- 2 - Question 7

Trench sewer construction is the most common pipeline installation method. At grade level, sewers can be installed and protected by an embankment or a wall, or placed inside tunnel walls.

Test: Design of Sewer- 2 - Question 8

The type of wastewater treatment process for treating wastewater or industrial wastewater using aeration and biological flocs is called?

Detailed Solution for Test: Design of Sewer- 2 - Question 8

One of the sewer wastewater treatment processes is a biological treatment known as activated-sludge process. Wastewater is agitated and aerated to remove solids and oxidation methods are introduced to activate decomposition.

Test: Design of Sewer- 2 - Question 9

What is the abbreviation of SSMP?

Detailed Solution for Test: Design of Sewer- 2 - Question 9

SSMP stands for Sewer System Management Plan. This is a document that any agency uses to manage the wastewater collection system effectively. It helps in improving the condition of the collection system infrastructure.

Test: Design of Sewer- 2 - Question 10

For which of the following reason SSMP is not used?

Detailed Solution for Test: Design of Sewer- 2 - Question 10

Sewer System Management plan is mainly used to maintain and improve the condition of the collection system infrastructure in order to provide reliable service for the future. Reducing the size of the sewers may lead to overflow conditions during the periods of high storm.

14 videos|99 docs|98 tests
Information about Test: Design of Sewer- 2 Page
In this test you can find the Exam questions for Test: Design of Sewer- 2 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Design of Sewer- 2, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

14 videos|99 docs|98 tests
Download as PDF

Top Courses for Civil Engineering (CE)