A 110/220 V, 60 Hz, single phase, 1-kVA transformer has leakage reactance of 4%. Calculate its total leakage inductance (in mH) referred to 110 V side.
A single phase transformer has 350 and 700 turns in its primary and secondary winding. The primary is connected to a 400 V, 50 Hz ac supply. If the net cross sectional area of core is 50 cm2, the maximum value of flux density in the core is
1 Crore+ students have signed up on EduRev. Have you? Download the App |
A single phase transformer takes a no load current of 1.3 A when high voltage winding is kept open. If the iron loss component of no load current is 0.5 A, the magnetizing component of no load current will be____ (in A)
For a specified input voltage and frequency, if the equivalent radius of the core of a transformer is reduced by half, the factor by which the number of turns in the primary should change to maintain the same no load current is
The maximum efficiency of a 100 kVA, signal phase transformer is 98% and occurs at 80% of full load at 0.8 P.F. If the leakage impedance of the transformer is 5%, find voltage regulation (in %) at rated load of 0.8 power factor lagging.
A 600 kVA transformer has an efficiency of 95% at full load and also at 60% of full load; both at U.P.F. Determine the efficiency of transformer at 3/4 th full load.
A 220/115 V, 25 Hz single phase transformer has eddy current loss 150W, which is half of the no load loss at rated applied voltage. If the transformer is used with primary 50 Hz 440 V, the total no load loss would be
The no-load voltage of the transformer is 440V and It's load current 10A. If the equivalent resistance, Reactance is 0.12Ω and 2.42Ω and is operating at a power factor of 0.8 lag, then the voltage Regulation of transformer is _________%
A 1 kVA, 200/100 V, 50 Hz, single phase transformer gave the following results on 50 Hz:
OC (LV side): 100 V, 20 watts
SC (HV side): 5 A, 25 watts
It is assumed that no load loss components are equally divided. The above tests were then conducted on the same transformer at 40 Hz. Test results are
OC (HV): 160 V, W1 watts
SC (LV): 10 A, W2 watts
Neglecting skin effect, W1 and W2 will be
A 50 Hz, single phase transformer draws a short circuit current of 30 A at 0.2 power factor lag when connected to 16V, 50 Hz source. The short circuit current when the same transformer is energized from 16V, 25 Hz source is____ (in A)
25 docs|247 tests
|
25 docs|247 tests
|