If the speed of rotation of a separately excited dc machine is halved and the filed strength is also reduced to half of the original. Then the emf induced in the armature
If the speed of rotation for a four pole, 220V dc machine is 1 m/s, flux density as 2T having length of bore as 0.1m and radius of 0.5m.The emf induced under pole faces will be
1 Crore+ students have signed up on EduRev. Have you? Download the App |
The induced emf in the armature of a 4-pole dc machine is
If the armature current is by mistake increased to 50% for the dc machine,
For a four pole, 16 slot armature with two coil-side/slot having lap connected progressive winding has single turn coils. The same machine is then wave wound, the emf induced in the lap wound dc machine to that of wave wound will be
A duplex lap wound armature is used in six pole dc machine with six brush set. The number of current paths in this machine is
For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils has simplex winding.The number of current paths
For a four pole, 200 V dc shunt generator having armature resistance of 1 ohms. The current flowing in the armature is 10 A. What is the back emf generated if the terminal voltage of 220 V supply is fed?
Emf produced by DC machine, for zero armature current (E1) and non-zero armature current (E2) can be related as__________
Which of the following cannot reduce the terminal voltage of a dc shunt generator?
19 videos|90 docs|25 tests
|
19 videos|90 docs|25 tests
|