All Courses
Get the App Signup / Login
Sign in Open App
Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  GATE Mechanical (ME) Mock Test Series 2025  >  GATE Mock Test Mechanical Engineering (ME) - 5 - Mechanical Engineering MCQ

GATE Mock Test Mechanical Engineering (ME) - 5 - Mechanical Engineering MCQ


Test Description

30 Questions MCQ Test GATE Mechanical (ME) Mock Test Series 2025 - GATE Mock Test Mechanical Engineering (ME) - 5

GATE Mock Test Mechanical Engineering (ME) - 5 for Mechanical Engineering 2024 is part of GATE Mechanical (ME) Mock Test Series 2025 preparation. The GATE Mock Test Mechanical Engineering (ME) - 5 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The GATE Mock Test Mechanical Engineering (ME) - 5 MCQs are made for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for GATE Mock Test Mechanical Engineering (ME) - 5 below.
Solutions of GATE Mock Test Mechanical Engineering (ME) - 5 questions in English are available as part of our GATE Mechanical (ME) Mock Test Series 2025 for Mechanical Engineering & GATE Mock Test Mechanical Engineering (ME) - 5 solutions in Hindi for GATE Mechanical (ME) Mock Test Series 2025 course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt GATE Mock Test Mechanical Engineering (ME) - 5 | 65 questions in 180 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study GATE Mechanical (ME) Mock Test Series 2025 for Mechanical Engineering Exam | Download free PDF with solutions
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 1
Save

Fill in the blank with the correct word.

Unfortunately, the commentaries in the guidebook sometimes hinder rather than_____ the visitors' appreciation of the paintings in the gallery

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 1
There are two negative indicators in this sentence-'unfortunately' and `rather than'-both of which imply contrast in ideas. If the author of the sentence finds it unfortunate that the commentaries in the guidebook to the art gallery sometimes hinder the visitors' appreciation of the paintings in it, what will he consider to be the legitimate function of the commentaries? Obviously, `to help', `to increase', `to assist' or `to aid' the visitor appreciation. Among the choices, 'enhance' has the same meaning as 'increase', and is the answer.
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 2
Save

Which of the following is the antonym of the word SILENCE?

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 2
Silence refers to 'no speech'. Babble means continuous, and sometimes incoherent speech.
1 Crore+ students have signed up on EduRev. Have you? Download the App
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 3
Save

Choose the pair which best expresses the relationship similar to that expressed in the capitalized pair.

DRILL : BORING ∷

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 3
(THING AND PURPOSE) A drill is a tool used for boring ; a die is tool for shaping.
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 4
Save

Directions: In the following question, from amongst the figures marked (1), (2), (3) and (4), select the one which satisfies the same conditions of placement of the dots as in figure (X)
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 4

In figure (X), one of the dots lies in the region common to the square and the triangle only, another dot lies in the region common to the circle and the triangle only and the third dot lies in the region common to the triangle and the rectangle only. In figure (2), there is no region common to the square and the triangle only. In figure (3), there is no region common to the circle and the triangle only. In figure (4), there is no region common to the triangle and the rectangle only. Only figure (1) consists of all the three types of regions.

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 5
Save

Directions: In the following question, a square transparent sheet with a pattern is given. Figure out from among the four alternatives as to how the pattern will appear when the transparent sheet is folded along the dotted line.
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 5

The above transparent figure, when folded along the dotted line, becomes

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 6
Save

Which of the following statements cannot be inferred from the passage?

Not stagnating moment to moment is called achievement. Inward humility is achievement, outward courtesy is virtue. Establishing myriad truth in your nature is achievement; the mind being essentially detached from thoughts is virtue. Not departing from one's essential nature is achievement; acting adaptively without being affected is virtue. Continuity moment to moment is achievement; balance and directness of mental activity are virtue. Refining your own nature is achievement. Refining your own person is virtue.
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 6

Going through the passage,

(1) is eliminated as it is true as per line,' Inward humility is achievement, outward courtesy is virtue' of the passage.

(2) is true as per the line ,'Refining your own nature is achievement. Refining your own person is virtue'. Hence, eliminated.

(3) can also be inferred in the last lines.

(4) is the only statement that can not be inferred, hence the Answer: (4)

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 7
Save

In a chess competition involving some boys and girls of a school, every student had to play exactly one game with every other student. It was found that in 45 games both the players were girls and in 190 games both were boys. The number of games in which one player was a boy and the other was a girl is
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 7

Number of games two girls = g C2

Number of games two boys = b C2

b2 - b - 380 = 0

( b - 20 ) ( b + 190 ) = 0

∴ b = 20 as b ≠ - 19

∴ Number of games in which one player is a boy and the other is a girl = 435 - 45 - 190 = 200

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 8
Save

1/38 + 1/39 + 1/39 + 1/39 is equal to
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 8

Remember that you can only add fractions with the same denominator.

Rearrange 1/38 so that it can be added to 1/39. That is, try and turn 1/38 into a fraction with 39 in the denominator.

Multiply 1/38 by 3/3 to get

1/38 x 3/3 = 3/38 x 3 = 3/39

solving,

Canceling out a factor of 3 gives

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 9
Save

In a right angle triangle ABC with vertex B being the right angle, the mutually perpendicular sides AB and BC are p cm and q cm long respectively. If the length of the hypotenuse is (p + q — 6)cm, the radius of the largest possible circle that can be inscribed in the triangle is
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 9

The largest possible circle that can be inscribed in the triangle is the one which touches the 3 sides. Since A is an external point from where AN and AM are tangents to this circle, we have AM = AN = a (say)

CN=CL=b (say)

If O is the centre of the circle, then OM = OL = r (radius of this circle)

BC = q = b + r and AB = p = a + r

We are given the hypotenuse CA = AN + NC

=p + q - 6 = a + b

Or using the values of p and q.

We get

b + r + a + r - 6 = a + b

r=3 cm

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 10
Save

What will be the sum of the factors of 3129?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 10
N is a number such that N = ap bq cr ... where a, b, c are prime number and p, q, r are positive integers.

Here a = 3, p = 129,

so required sum = (3130 - 1) / 2 .

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 11
Save

In a Go/No - go -gage, which one of the describes the function of the Go —gage?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 11
The Go limit is used to check the dimension at its maximum material condition. This is the minimum size for an internal feature such as a hole and it is the maximum size for an external feature such as an outside diameter. The No - Go limit is used to inspect the minimum material condition of the dimension in question.
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 12
Save

Which of the following machines does not require a flywheel?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 12
A gas turbine does not require a flywheel. A flywheel is a device which is used to control the variation in speed, during each cycle of an engine or it acts as an energy reservoir for storing and releasing the mechanical energy of an engine.
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 13
Save

Quality screw threads are produced by
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 13

Quality screw threads are produced by only thread casting.
Quality screw threads are made by die-casting and permanent mould casting are very accurate and of high finish, if properly made.

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 14
Save

Identify the Newton-Raphson iteration scheme for finding the square root of 2.
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 14
We have, x = √2 or x2 – 2 = 0

or f(x) = x2 – 2

From the Newton – Raphson iteration,

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 15
Save

Considering the variation of static pressure and absolute velocity in an impulse stream turbine across one row of moving blades,
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 15


The diagram shows that static pressure remains constant, while velocity decreases.

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 16
Save

A rectangular channel 6.0 m wide carries a discharge of 16.0 m3/s under uniform condition with normal depth of 1.60 m. Manning's n is 0.015.

The channel width is to be contracted. The minimum width to which the channel can be contracted without affecting the upstream flow condition is
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 16
At sub-critical flow, when width of the channel is contracted, there will be decrease in depth of flow at the contracted section and depth of contracted section will decrease till it reaches the depth at contracted section equal to critical depth and flow at contracted section will be critical flow means minimum specific energy.

B2/3 = 2.557

∴ B = 4.088 m ≃ 4.1 m

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 17
Save

Match the following :
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 17
Face centred cubic —Ca, Ni, Cu, Ag, Pt, Pb, Al

Hexagonal close packed —Be, Mg, Zn, Cd, Te

Body centred cubic —Na, K, V, Mo, Ta, W

Simple cubic —Po

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 18
Save

Match List - I (Measuring instruments) with List - II (Measuring/testing parameters) and select the correct answer using the codes given below the list:
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 18
The Try square is used to check the external squareness of a workpiece. To do this, butt the stock of the square up to the edge of the workpiece with the inside edge of the blade sitting across the workpiece surface.

Surface plate is used as a measuring base or a datum surface for testing of flatness of surfaces.

A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two components.

Slip gauges are used to provide end standards of specific length by combining several individual slip gauges into a single gauge bar.

A micrometer, also called micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers.

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 19
Save

Minimum number of links require to make consisting of lower pairs only
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 19
DOF = 3(n — 1) — 2j

n= number of links

j = number of lower pairs

For minimum number of links, DOF = 1

1 = 3(n — 1) — 2j

3n — 2j = 4

n = 4 + 2j /3

∵ j > 1, for minimum number of links

j can be taken as 4 to get integer value for n

⇒ n = 4+2x4 / 3 = 4

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 20
Save

Consider the following parameters:

  1. Grinding wheel diameter

  2. Regulating wheel diameter

  3. Speed of grinding wheel

  4. Speed of regulating wheel

Which of the above parameters will influence the axial feed rate in centre-less grinding?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 20

In different from other cylindrical processes, where the work piece is held in the grinding machine, while grinding between centers, the workpiece is not mechanically constrained during centreless grinding. Therefore the parts to be ground on a centreless grinder do not need center holes, drivers or workhead fixtures at the ends

Axial feed rate in centreless grinding is,

f = πDNsinα

Where, N is speed of regulating wheel and

D is diameter of regulating wheel

α is angle between the axes of grinding and regulating wheels

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 21
Save

A man wanted to sell an article with 33% profit but he actually sold at 16% loss for Rs. 504. At what price did he want to sell it to earn the profit?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 21

According to question:
Let CP = 100%
Loss = 16%
SP = 100% - 16% = 84%
84% correspond to 504.
1% correspond to 504/84
So, SP of article to earn a profit of 33% = 133 × 504/84 = 798.

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 22
Save

A cylindrical resistor element on a circuit board dissipates 0.8 W of power. The resistor is 2 cm long and has a diameter of 0.4 cm. For heat to be transferred uniformly from all surfaces, the amount of heat this resistor dissipates during a 24-hour period and the heat flux, respectively, are
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 22

The amount of heat this resistor dissipates during a 24-hour period is,

= 19.2 Wh = 69.1 kJ (since 1 Wh = 3600 Ws = 3.6 kJ)

= 0.251 + 2.513 = 2.764 cm2

The heat flux on the surface of the resistor is,

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 23
Save

Evaluate where [ x ] denotes greatest integer
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 23

= 13 / 2

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 24
Save

Consider a refrigerator with a COP of 1.2. It removes heat from the refrigerated space at a rate of 60 kJ/min. What will be the electric power consumed by the refrigerator and the rate of heat transfer to the kitchen air, respectively?
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 24

Using the definition of the coefficient of performance, the power z input to the refrigerator is determined to be

The heat transfer rate to the kitchen air is determined from the energy balance as

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 25
Save

If f and g are differentiable function in [ 0,1] satisfying f (0) = 3 = g(1), g(0) = 0 and f (1) = 6, then for same C ∈ (0, 1)
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 25

By Lagrange,s Mean Value Theorem,

= 6 - 3 / 3

= 1

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 26
Save

The crystal structures that delta iron and gamma iron have, respectively, are
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 26
As molten iron cools down, it crystallizes at 1538°C into its d-allotrope, which has a BCC crystal structure and the gamma iron which has a FCC crystal structure.
*Answer can only contain numeric values
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 27
Save

Let p = . The product of eigen values of p-1 is

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 27

det (p) = । p। = - 20 + 18 = - 2

Product of eigen values of p-1 = । p-1 ।

= - 1 / 2

= - 0.5

GATE Mock Test Mechanical Engineering (ME) - 5 - Question 28
Save

Earing in a drawn cup can be due to non-uniform

  1. Speed of the press

  2. Clearance between tools

  3. Material properties

  4. Blank holding

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 28
Earing defect in a deep drawing is due to wavy projections (i.e. ears) formed as a result of directional properties or anisotropy of the strip. Earing is one of the major defects observed in a deep drawing process due to the anisotropic nature of the sheet material and due to non-uniform speed of the press and blank holding.
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 29
Save

In electro chemical machining of an iron surface that is 20 mm x 20 mm in cross section using NaCl in water as electrolyte. The gap between the tool and the work piece is 0.2 mm. The supply voltage is 13 Vdc . The specific resistance of the electrolyte is 2Ωcm. Then material removal rate (in g /s) is Take Valency (Z) = 2, Atomic weight (A) = 55.85, Density (pa) = 7860 kg /m3, Faraday constant = 96540 coulombs
Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 29

Given data

Cross sectional area of the gap , Agap = 20 x 20 = mm2

Gap between the tool and work piece , H = 0.2 mm

Voltage , V = 13 V

ρ = 2 Ωcm = 2 x 10 Ωmm

Material removal rate in ECM by considering 100% current efficiency, MRR = AI / ZF

= 72605 / 193080

= 0.376 g / s

*Answer can only contain numeric values
GATE Mock Test Mechanical Engineering (ME) - 5 - Question 30
Save

In the figure shown, what will be the moment (kN-m) at the fixed support? (Answer up to the nearest integer)

Detailed Solution for GATE Mock Test Mechanical Engineering (ME) - 5 - Question 30

In an equilibrium condition,

Now taking the moment about the fixed support A,

MA = 16 kN - m

View more questions
29 docs|220 tests
Join Course
Information about GATE Mock Test Mechanical Engineering (ME) - 5 Page
In this test you can find the Exam questions for GATE Mock Test Mechanical Engineering (ME) - 5 solved & explained in the simplest way possible. Besides giving Questions and answers for GATE Mock Test Mechanical Engineering (ME) - 5, EduRev gives you an ample number of Online tests for practice

Top Courses for Mechanical Engineering

Download as PDF

Top Courses for Mechanical Engineering

Important Questions for GATE Mock Test Mechanical Engineering (ME) - 5

Find all the important questions for GATE Mock Test Mechanical Engineering (ME) - 5 at EduRev.Get fully prepared for GATE Mock Test Mechanical Engineering (ME) - 5 with EduRev's comprehensive question bank and test resources. Our platform offers a diverse range of question papers covering various topics within the GATE Mock Test Mechanical Engineering (ME) - 5 syllabus. Whether you need to review specific subjects or assess your overall readiness, EduRev has you covered. The questions are designed to challenge you and help you gain confidence in tackling the actual exam. Maximize your chances of success by utilizing EduRev's extensive collection of GATE Mock Test Mechanical Engineering (ME) - 5 resources.

GATE Mock Test Mechanical Engineering (ME) - 5 MCQs with Answers

Prepare for the GATE Mock Test Mechanical Engineering (ME) - 5 within the Mechanical Engineering exam with comprehensive MCQs and answers at EduRev. Our platform offers a wide range of practice papers, question papers, and mock tests to familiarize you with the exam pattern and syllabus. Access the best books, study materials, and notes curated by toppers to enhance your preparation. Stay updated with the exam date and receive expert preparation tips and paper analysis. Visit EduRev's official website today and access a wealth of videos and coaching resources to excel in your exam.

Online Tests for GATE Mock Test Mechanical Engineering (ME) - 5 GATE Mechanical (ME) Mock Test Series 2025

Practice with a wide array of question papers that follow the exam pattern and syllabus. Our platform offers a user-friendly interface, allowing you to track your progress and identify areas for improvement. Access detailed solutions and explanations for each test to enhance your understanding of concepts. With EduRev's Online Tests, you can build confidence, boost your performance, and ace GATE Mock Test Mechanical Engineering (ME) - 5 with ease. Join thousands of successful students who have benefited from our trusted online resources.
© EduRev
Education Revolution
Follow Us
Signup to see your scores go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup