Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  GATE Mechanical (ME) Mock Test Series 2025  >  Practice Test: Mechanical Engineering (ME)- 6 - Mechanical Engineering MCQ

Practice Test: Mechanical Engineering (ME)- 6 - Mechanical Engineering MCQ


Test Description

30 Questions MCQ Test GATE Mechanical (ME) Mock Test Series 2025 - Practice Test: Mechanical Engineering (ME)- 6

Practice Test: Mechanical Engineering (ME)- 6 for Mechanical Engineering 2024 is part of GATE Mechanical (ME) Mock Test Series 2025 preparation. The Practice Test: Mechanical Engineering (ME)- 6 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The Practice Test: Mechanical Engineering (ME)- 6 MCQs are made for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Practice Test: Mechanical Engineering (ME)- 6 below.
Solutions of Practice Test: Mechanical Engineering (ME)- 6 questions in English are available as part of our GATE Mechanical (ME) Mock Test Series 2025 for Mechanical Engineering & Practice Test: Mechanical Engineering (ME)- 6 solutions in Hindi for GATE Mechanical (ME) Mock Test Series 2025 course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt Practice Test: Mechanical Engineering (ME)- 6 | 65 questions in 180 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study GATE Mechanical (ME) Mock Test Series 2025 for Mechanical Engineering Exam | Download free PDF with solutions
Practice Test: Mechanical Engineering (ME)- 6 - Question 1

Question 1 to 5 carry One Mark each

Q.

Even as the --------- else where in the world are struggling, to come out of recession, Indian consumers are splurging on consumer goods and to ----- this growth, companies are investing heavily in various sectors.

Practice Test: Mechanical Engineering (ME)- 6 - Question 2

In the olympic games, the flags of six nations were flown on the masts in the following way. T he flag of
America was to the left of Indian tricolor and to the right of the flag of france. T he flag of australia was on
the right of the indian flag but was to the left of the flag of japan, which was to the left of the flag of china.
Find the two flags which are in the centre.

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 2

India and Australia

[France – America – India –Aus. –Japan – China]

1 Crore+ students have signed up on EduRev. Have you? Download the App
Practice Test: Mechanical Engineering (ME)- 6 - Question 3

From the given equilateral triangle below, A, B and C run along. T he sides in clockwise direction and stop
aft er coming  sides. Which of the following statements is true?

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 3

A is the S–W of B

Practice Test: Mechanical Engineering (ME)- 6 - Question 4

In the following questions, a sent ence has been given in direct/indirect speech.
Nitin said to me, “why don’t you come with us? why do you want to be so unsocial.

Practice Test: Mechanical Engineering (ME)- 6 - Question 5

Direction (5) Spotting the error

/In order to transfer (A)

/ branch licenses for one (B)

/ bank to anot her you require special approval from RBI (C)

/ No error (D).

Practice Test: Mechanical Engineering (ME)- 6 - Question 6

Question 6 to 10 carry Two Marks each

Q.

In an NGO, the daily average ages of 20 illiterate employee is decreased from Rs. 25 to Rs. 10. Thus the
average salary of all the literate (educated) and illiterate employees is decreased by Rs. 10 perday. T he
number of educated employees working in the NGO is :

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 6

Total employees = (25−10)×20/10=30

 Hence number of educated employees  = 30-20 = 10

Practice Test: Mechanical Engineering (ME)- 6 - Question 7

Common Data Question (7-8)

The ratio of the percentage share of Dairy Milk to that of ot her is?

 

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 7

Practice Test: Mechanical Engineering (ME)- 6 - Question 8

If in the next year, Crackle and Dairy Milk decided to join hands and increase their market share from their
combined existing share by 20%. What will be their combined sales if the mark size remains the same?

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 8

Practice Test: Mechanical Engineering (ME)- 6 - Question 9

Simple interest on a certain amount is 9/16 of the principle. If the number represent ing the rate of intersest in percent and time in years be equal. T hen time, for when the principal is lent out is,

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 9

Practice Test: Mechanical Engineering (ME)- 6 - Question 10

A boat sails across a river with a velocity of 10 km/hr. If resultant boat velocity is 14 km/hr, then what is the velocity of river water? 

Practice Test: Mechanical Engineering (ME)- 6 - Question 11

Question 11 to 35 carry One Mark each

Q.

If the probability for A to fail in an examination is .2 and that for B is .3 then the probability that either
A or B fails is

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 11

Practice Test: Mechanical Engineering (ME)- 6 - Question 12

Eigen value of unit ary matrix are always

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 12

T he eigen value of unit ary matrix are always of  unit modulus.

*Answer can only contain numeric values
Practice Test: Mechanical Engineering (ME)- 6 - Question 13

If    t hen the value of  

______________


Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 13

*Answer can only contain numeric values
Practice Test: Mechanical Engineering (ME)- 6 - Question 14

A rigid wheel 1.25 diameter is to be provide with a t hin steel t yre. If the stress in the steel t yre is not
to exceed 140 N/mm2, what is the int ernal diameter of the tyre? Take E = 2 × 105 N/mm2 and
α = 1.2 × 10-5 per oC ________________


Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 14

Practice Test: Mechanical Engineering (ME)- 6 - Question 15

In case of solution of a two variable linear programming problem by graphical method one constraints line
comes parallel t o the objective function line which one of the following is correct?

Practice Test: Mechanical Engineering (ME)- 6 - Question 16

If 'u' and 'v' the component of velocity in x-direction and y-direction respectively are given u = ax+by and
v = cx + dy then the condition to be satisfy is

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 16

Practice Test: Mechanical Engineering (ME)- 6 - Question 17

T he two links OA and OB are connected by a pin joint at 'O'. If the link OA t urns with angular velocity
1' rad/s in the clockwise direction and th e link OB turns with angular velocity 'ω2' rad/s is the
anticlockwise direction, then the rubbing velocity at the pin joint 'O' is

 

Where r = Radius of the pin at 'O'

Practice Test: Mechanical Engineering (ME)- 6 - Question 18

According to Indian standard specifications, a grey cost iron designated by 'FG200' means that the

*Answer can only contain numeric values
Practice Test: Mechanical Engineering (ME)- 6 - Question 19

T here is a slab having temperat ure at left and right faces 800 K and 600 K respectively and slab material
having conductivit y k = 20 W/mK at 0°C. Find the mean thermal conductivity for the slab given β = 0.01 per
unit kelvin _________________W/mK


Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 19

Practice Test: Mechanical Engineering (ME)- 6 - Question 20

The following sheet metal operat ion induces shear stresses in the part

Practice Test: Mechanical Engineering (ME)- 6 - Question 21

Reduced pressure is

Practice Test: Mechanical Engineering (ME)- 6 - Question 22

Steam coming out of the whistle of a pressure cooker is

*Answer can only contain numeric values
Practice Test: Mechanical Engineering (ME)- 6 - Question 23

What should be the minimum length two a high strength steel rod of 12.5 mm diamet er so t hat one end
can be t wisted by 30o with respect of the other end, without exceeding a shear stress of 270 N/mm2 given
modulus of rigidity G = 8 × 104 N/mm2

_________________ m


Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 23

Practice Test: Mechanical Engineering (ME)- 6 - Question 24

The linear programming is used for opt imization problems which satisfy the following conditions.
(1) Objective function expressed as a linear function of variable
(2) Resources are unlimited
(3) T he decision variable are interrelated and non-negative
Which of the statements is/are correct?

*Answer can only contain numeric values
Practice Test: Mechanical Engineering (ME)- 6 - Question 25

The dynamic viscosity of a fluid is 1 Poise. What should one multiply to it to get the answer in N-s/m2?


Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 25

1 Poise = 1 dyne-s/cm2

Practice Test: Mechanical Engineering (ME)- 6 - Question 26

T he four bar mechanism shown in the given figure
Given OA = 3cm , AB = 5cm, BC = 6 cm and OC = 7cm is a

Practice Test: Mechanical Engineering (ME)- 6 - Question 27

Ball bearing are usually made from

Practice Test: Mechanical Engineering (ME)- 6 - Question 28

For a metallic wall at 200°C a metallic rod prot rudes to the ambient air. The temperat ure at the tip will be
minimum when the rod is made of

Practice Test: Mechanical Engineering (ME)- 6 - Question 29

Blank holding is normally required in

Practice Test: Mechanical Engineering (ME)- 6 - Question 30

When 'd' is the diameter of the molecules of a gas in a confined space, the collision frequency will be
proportional to

Detailed Solution for Practice Test: Mechanical Engineering (ME)- 6 - Question 30

T he collision frerquency is the number of collision experienced by the molecules of gas per second and is given by

Where v = average molecular velocity, d =
diameter of molecules, and N = number of
molecules per c.c.

View more questions
29 docs|220 tests
Information about Practice Test: Mechanical Engineering (ME)- 6 Page
In this test you can find the Exam questions for Practice Test: Mechanical Engineering (ME)- 6 solved & explained in the simplest way possible. Besides giving Questions and answers for Practice Test: Mechanical Engineering (ME)- 6, EduRev gives you an ample number of Online tests for practice

Top Courses for Mechanical Engineering

Download as PDF

Top Courses for Mechanical Engineering