Test: Chopper - 1

Test: Chopper - 1

Test Description

10 Questions MCQ Test GATE Electrical Engineering (EE) 2023 Mock Test Series | Test: Chopper - 1

Test: Chopper - 1 for Electrical Engineering (EE) 2022 is part of GATE Electrical Engineering (EE) 2023 Mock Test Series preparation. The Test: Chopper - 1 questions and answers have been prepared according to the Electrical Engineering (EE) exam syllabus.The Test: Chopper - 1 MCQs are made for Electrical Engineering (EE) 2022 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Chopper - 1 below.
Solutions of Test: Chopper - 1 questions in English are available as part of our GATE Electrical Engineering (EE) 2023 Mock Test Series for Electrical Engineering (EE) & Test: Chopper - 1 solutions in Hindi for GATE Electrical Engineering (EE) 2023 Mock Test Series course. Download more important topics, notes, lectures and mock test series for Electrical Engineering (EE) Exam by signing up for free. Attempt Test: Chopper - 1 | 10 questions in 30 minutes | Mock test for Electrical Engineering (EE) preparation | Free important questions MCQ to study GATE Electrical Engineering (EE) 2023 Mock Test Series for Electrical Engineering (EE) Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Test: Chopper - 1 - Question 1

Assertion (A): The principal of step-up chopper can be employed for the regenerative braking of dc motors. Reason (R) : The step-up chopper can be employed in regenerative braking only for increasing motor speeds

Detailed Solution for Test: Chopper - 1 - Question 1

The step-up chopper can be employed in regenerative braking both for increasing and decreasing motor speed provided duty cycle a is so adjusted that Vs/( 1 - a) exceeds the fixed source voiiage V0. Hence, reason is a false statement.

Test: Chopper - 1 - Question 2

A dc chopper has a T0N of 1 ms and its frequency is 500 Hz. What will be its duty cycle?

Detailed Solution for Test: Chopper - 1 - Question 2

Test: Chopper - 1 - Question 3

An RLE load is operating in a chopper circuit from a 500 volts dc source as shown in figure For the load, L = 0.06H, R=0 Ω an duty cycle of 0.2, what is the chopping frequency to limit the amolitude of load current excursion to 10 A?

Detailed Solution for Test: Chopper - 1 - Question 3

Test: Chopper - 1 - Question 4

In a type-A chopper, the maximum value of ripple current is

Detailed Solution for Test: Chopper - 1 - Question 4

Test: Chopper - 1 - Question 5

Match List-I (Thyristor chopper circuits) wtih List-ll (Characteristics) and select the correct answer using the codes given below the lists:
List-I
A. Current commutated chopper
B. Voltage commutated chopper
C. Load commutated chopper

List-ll
1. Diode in antiparallel with main SCR
2. Used in high power circuits
3. No requirement of any commutating inductor

Detailed Solution for Test: Chopper - 1 - Question 5

• In a current-commutated chopper a diode is connected in antiparallel with the main thyristor so that voltage drop across the diode reverse biases the main SCR.
• A voltage-commutated chopper is generally used in high-power circuits where load fluctuation is not very large.
• In a load-commutated chopper no commutating inductor is required that is normally costly, bulky and noisy.

Test: Chopper - 1 - Question 6

In dc choppers, per unit ripple is maximum when duty cycle α is

Test: Chopper - 1 - Question 7

If T is the chopping period, Ton the on-time period of chopper and Toff the off-time period of the chopper, then consider the following statements associated with the methods of controlling the output voltage of a chopper:
1. In pulse-width modulation (PWM) scheme, T is kept constant while Ton is varied.
2. In variable-frequency modulation (VFM) scheme, T is varied while either of Ton or Toff is kept constant.
3. In PWM scheme, the output voltage can be varied between zero to source voltage.
4. The large Toff in VFM scheme may make the load current discontinuous
5. PWM scheme is better than VFM scheme.

Which of the statements given above are correct?

Test: Chopper - 1 - Question 8

In dc choppers, the waveforms for input and output voltages are respectively

Test: Chopper - 1 - Question 9

A class C chopper is operated from a 220 V battery. The load Is a dc motor with R = 0.1Ω, L= 10 mH and Eb= 100 V. The duty cycle of the chopper to achieve regenerative braking at the rated current of 10 Ampere would be equal to

Detailed Solution for Test: Chopper - 1 - Question 9

Test: Chopper - 1 - Question 10

Assertion (A) : In dc choppers, it is essential to provide a separate commutation circuitry to commutate the main power SCR.
Reason ( R ) : A chopper is dc equivalent to an ac transformer having continuously variable turns ratio.

Detailed Solution for Test: Chopper - 1 - Question 10

Since the input supply to a dc chopper is fixed do voltage therefore, natural commutation is not possible in a dc chopper. Due to this reason a separate commutation circuit is required to commutate the main power SCR in a dc chopper. Reason is also a true statement but not the correct explanation of assertion.

GATE Electrical Engineering (EE) 2023 Mock Test Series

20 docs|208 tests
 Use Code STAYHOME200 and get INR 200 additional OFF Use Coupon Code
Information about Test: Chopper - 1 Page
In this test you can find the Exam questions for Test: Chopper - 1 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Chopper - 1, EduRev gives you an ample number of Online tests for practice

GATE Electrical Engineering (EE) 2023 Mock Test Series

20 docs|208 tests