# Test: Experimentation Of Transfer Functions

## 10 Questions MCQ Test | Test: Experimentation Of Transfer Functions

Description
Attempt Test: Experimentation Of Transfer Functions | 10 questions in 10 minutes | Mock test for Electrical Engineering (EE) preparation | Free important questions MCQ to study for Electrical Engineering (EE) Exam | Download free PDF with solutions
QUESTION: 1

### The impulse response of a LTI system is a unit step function, then the corresponding transfer function is

Solution:

Explanation: The impulse response of a LTI system is the transfer function itself and hence for the unit step function . As input then the transfer function will be 1/s.

QUESTION: 2

### For a type one system, the steady – state error due to step input is equal to

Solution:

Explanation: The steady state error is defined as the error between the final value and the desired response and the difference in the value of both will be the steady state error due to step input for type one system is zero.

QUESTION: 3

### The equation 2s4+s3+3s2+5s+10=0 has roots in the left half of s–plane:

Solution:

Explanation: The roots of the equation can be calculated using Routh-Hurwitz criterion and hence there are 2 sign changes in the first column of the row and therefore the two roots lie on the right half of s-plane.

QUESTION: 4

If the Nyquist plot of the loop transfer function G (s)H (s) of a closed-loop system encloses the (1, j0) point in the G (s)H (s) plane, the gain margin of the system is

Solution:

Explanation: Nyquist plot deals with the open loop poles and zero and equals the encirclements to the open loop poles of the system.

QUESTION: 5

Consider the function F (s) =5/s (s2+s+2) , where F (s) is the Laplace transform f (t). Then the final value theorem is equal to

Solution:

Explanation: Final value theorem is given for the stable system only and this is a type 1 system and for step input the final value can be calculated as 5/2.

QUESTION: 6

The transfer function of a phase-lead controller is given by

Solution:

Explanation: For the phase lead controller in which the stability and speed of response is more for the system, the magnitude of the pole must be greater than the magnitude of the zero.

QUESTION: 7

If the system matrix of a linear time invariant continuous system is given by
Its characteristic equation is given by:

Solution:

Explanation: The transfer function is calculated by the state variable analysis and hence the transfer function is calculated by state transition matrix and taking the inverse Laplace transform.

QUESTION: 8

Given a unity feedback control system with G (s) = K/s(s+4), the value of K for which the damping ratio is 0.5.

Solution:

Explanation: The value is found by using the Routh- Hurwitz criteria and equating one of the row of the Routh-Hurwitz criteria equal to zero and hence finding the value of K.

QUESTION: 9

The LVDT is used in the measurement of:

Solution: Use Code STAYHOME200 and get INR 200 additional OFF Use Coupon Code