NEET Exam  >  NEET Tests  >  Daily Test for NEET Preparation  >  Test: Stress and Strain (August 13) - NEET MCQ

Test: Stress and Strain (August 13) - NEET MCQ


Test Description

10 Questions MCQ Test Daily Test for NEET Preparation - Test: Stress and Strain (August 13)

Test: Stress and Strain (August 13) for NEET 2024 is part of Daily Test for NEET Preparation preparation. The Test: Stress and Strain (August 13) questions and answers have been prepared according to the NEET exam syllabus.The Test: Stress and Strain (August 13) MCQs are made for NEET 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Stress and Strain (August 13) below.
Solutions of Test: Stress and Strain (August 13) questions in English are available as part of our Daily Test for NEET Preparation for NEET & Test: Stress and Strain (August 13) solutions in Hindi for Daily Test for NEET Preparation course. Download more important topics, notes, lectures and mock test series for NEET Exam by signing up for free. Attempt Test: Stress and Strain (August 13) | 10 questions in 20 minutes | Mock test for NEET preparation | Free important questions MCQ to study Daily Test for NEET Preparation for NEET Exam | Download free PDF with solutions
Test: Stress and Strain (August 13) - Question 1

The slope of the stress-strain curve in the elastic deformation region is ____________

Detailed Solution for Test: Stress and Strain (August 13) - Question 1

The elastic modulus is the ratio of stress and strain. So on the stress strain curve, it is the slope.

Test: Stress and Strain (August 13) - Question 2

Which point on the stress strain curve occurs after the proportionality limit?

Detailed Solution for Test: Stress and Strain (August 13) - Question 2

The curve will be stress strain proportional upto the proportionality limit. After these, the elastic limit will occur.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Stress and Strain (August 13) - Question 3

Which point on the stress strain curve occurs after yield plateau?

Detailed Solution for Test: Stress and Strain (August 13) - Question 3

After the yield plateau the curve will go up to its maximum limit of stress which is its ultimate point.

Test: Stress and Strain (August 13) - Question 4
The impact strength of a material is an index of its
Detailed Solution for Test: Stress and Strain (August 13) - Question 4
The ability of the material to withstand stress (resist fracture due to high-impact loads) without fracture is known as toughness. It is defined as the ability to absorb energy in the plastic state. The impact strength of a material is an index of its toughness.
Test: Stress and Strain (August 13) - Question 5
Hooke's law holds good up to the limit of __________ .
Detailed Solution for Test: Stress and Strain (August 13) - Question 5
Hooke’s law holds up to the proportional limit. Hooke’s law in terms of stress and strain is

The constant of proportionality is called the elastic modulus or Young’s modulus, E. It has the same units as stress. E is a property of the material used.
Test: Stress and Strain (August 13) - Question 6
The plastic response (deformation) of a material to compressive force is known as:
Detailed Solution for Test: Stress and Strain (August 13) - Question 6
Malleability is a material's ability to undergo deformation under compressive force without breaking or cracking, typically referring to the ability to be hammered or rolled into thin sheets. When a malleable material experiences a force, it responds by deforming instead of shattering. This quality is especially important in metalworking where metals are often subjected to high levels of compressive stress.
Test: Stress and Strain (August 13) - Question 7
Modulus of rigidity is defined as:
Detailed Solution for Test: Stress and Strain (August 13) - Question 7
Modulus of rigidity or shear modulus is defined as the ratio of shear stress to shear strain within the elastic limit.
Test: Stress and Strain (August 13) - Question 8

In the given stress-strain curve of mild steel, DE represents:

Detailed Solution for Test: Stress and Strain (August 13) - Question 8

In the given stress-strain curve for mild steel, DE represents strain hardening. Strain hardening is the stage where the material undergoes large deformation with a relatively small increase in applied load. This deformation is caused by the slippage of the material along oblique surfaces and is primarily due to shearing stresses.

Test: Stress and Strain (August 13) - Question 9

Where is the necking region?

Detailed Solution for Test: Stress and Strain (August 13) - Question 9

Necking is a tensile strain deformation which is cased in after the ultimate amount of stress occurs in the material.

Test: Stress and Strain (August 13) - Question 10
If a piece of material neither expands nor contracts in volume when subjected to stresses, then the Poisson’s ratio must be
Detailed Solution for Test: Stress and Strain (August 13) - Question 10
If a material does not change in volume when subjected to stresses, then its Poisson's ratio must be 0.5. Poisson's ratio relates the lateral strain to the axial strain and is defined as the negative of the ratio of lateral strain to axial strain.
12 docs|366 tests
Information about Test: Stress and Strain (August 13) Page
In this test you can find the Exam questions for Test: Stress and Strain (August 13) solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Stress and Strain (August 13), EduRev gives you an ample number of Online tests for practice

Top Courses for NEET

Download as PDF

Top Courses for NEET