Class 10 Exam  >  Class 10 Tests  >  Science Class 10  >  Assertion & Reason Test: Electricity - 1 - Class 10 MCQ

Assertion & Reason Test: Electricity - 1 - Class 10 MCQ


Test Description

15 Questions MCQ Test Science Class 10 - Assertion & Reason Test: Electricity - 1

Assertion & Reason Test: Electricity - 1 for Class 10 2024 is part of Science Class 10 preparation. The Assertion & Reason Test: Electricity - 1 questions and answers have been prepared according to the Class 10 exam syllabus.The Assertion & Reason Test: Electricity - 1 MCQs are made for Class 10 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Assertion & Reason Test: Electricity - 1 below.
Solutions of Assertion & Reason Test: Electricity - 1 questions in English are available as part of our Science Class 10 for Class 10 & Assertion & Reason Test: Electricity - 1 solutions in Hindi for Science Class 10 course. Download more important topics, notes, lectures and mock test series for Class 10 Exam by signing up for free. Attempt Assertion & Reason Test: Electricity - 1 | 15 questions in 30 minutes | Mock test for Class 10 preparation | Free important questions MCQ to study Science Class 10 for Class 10 Exam | Download free PDF with solutions
Assertion & Reason Test: Electricity - 1 - Question 1

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Silver is not used to make electric wires.

Reason : Silver is a bad conductor.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 1
Silver is a good conductor of electricity but it is not used to make electric wires because it is expensive.
Assertion & Reason Test: Electricity - 1 - Question 2

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : When the resistances are connected end- to-end consecutively, they are said to be in series.

Reason : In case the total resistance is to be increased, then the individual resistances are connected in series.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 2
  • Current in a circuit depends on resistance as well as Potential Difference of the circuit.

  • It is necessary to combine two or more resistances to get the required current in the electrical circuits

  • Resistances can be combined in two ways: in series and in parallel.

  • When two or more resistances are connected end to end consecutively, they are said to be connected in series.

  • And on the other hand, when two or more resistances are connected between the same two points, they are said to be connected in parallel.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Assertion & Reason Test: Electricity - 1 - Question 3

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion: Tungsten metal is used for making filaments of incandescent lamps.

Reason : The melting point of tungsten is very low.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 3
Tungsten is selected for making filaments of incandescent lamp bulbs because tungsten can sustain high temperature and it has a high melting point, with high resistivity.
Assertion & Reason Test: Electricity - 1 - Question 4

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Alloys are commonly used in electrical heating devices, like electrical iron, toasters etc.

Reason : Alloys do not oxidise (burn) readily at high temperatures.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 4
An alloy generally has a higher resistivity than its constituent metals. Alloys do not oxidise (burn) readily at high temperatures. For this reason, they are commonly used in electrical heating devices, like electric iron, toasters etc.
Assertion & Reason Test: Electricity - 1 - Question 5

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : When a battery is short-circuited, the terminal voltage is zero.

Reason : In the situation of a short-circuit, the current is zero

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 5
In the case of a short-circuited battery, the current

Terminal voltage, V = IR = I(i) = 7(0) = 0

Where, R = external resistance = 0

Assertion & Reason Test: Electricity - 1 - Question 6

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : When the resistances are connected between the same two points, they are said to be connected in parallel.

Reason : In case the resistance is to be decreased, then the individual resistances are connected in parallel.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 6
In parallel connection, all the elements are connected between the same two points hence the voltage drop across any number of resistors or other elements connected in parallel is the same.
Assertion & Reason Test: Electricity - 1 - Question 7

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : A resistor of resistance R is connected to an ideal battery. If the value of R is decreased, the power dissipated in the circuit will increase.

Reason : The power dissipated in the circuit will increase.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 7
The relation between power dissipation and resistance is given by

P = E2/R i.e Power dissipation is indirectly proportional to the resistance. Hence if the value of R is decreased, the power dissipation in the circuit will increase. Hence the assertion is correct. But the reason is incorrect as it mentions that the power dissipation is directly proportional to the resistance of the circuit which contradicts the relation between power dissipation and resistance of the circuit.

Assertion & Reason Test: Electricity - 1 - Question 8

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : The electric bulbs glow immediately when the switch is on.

Reason : The drift velocity of electrons in a metallic wire is very high.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 8
In a conductor there are large numbers of free electrons. When we close the circuit, the electric field is established instantly with the speed of electromagnetic waves which causes electron drift at every portion of the circuit. Due to which the current is set up in the entire circuit instantly. The current which is set up does not wait for the electrons to flow from one end of the conductor to another end. Due to this, the bulb glows immediately when the switch is on.
Assertion & Reason Test: Electricity - 1 - Question 9

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Long distance power transmission is done

Reason : At high voltage supply power losses are less.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 9

Power loss = [P = Transmitted power]

Assertion & Reason Test: Electricity - 1 - Question 10

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Insulators do not allow flow of current through themselves.

Reason : They have no free-charge carriers.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 10
Insulators are bad conductors because they don't have free charge carriers which will flow and hence the correct option becomes A.
Assertion & Reason Test: Electricity - 1 - Question 11

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : The equation V = Ri does not apply to those conducting devices which do not obey Ohm’s law.

Reason : V= RI is a statement of Ohm’s law.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 11
It is a common error to say that V = Ri is a statement of Ohm’s law. The essence of Ohm’s law is that the value of R is independent of the value of V . The equation V — Ri is used for. finding resistance of all conducting devices, whether they obey Ohm’s law or not.
Assertion & Reason Test: Electricity - 1 - Question 12

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Heater wire must have high resistance and will be melting point.

Reason : If resistance is high, the electric conductivity will be less.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 12
Heater wire must have high resistance and high melting point, because in series current remains same, therefore according to Joule’s law, H= PR t, heat produced is high if R is high melting point must be high, so that wire may not melt with increase in temperature.
Assertion & Reason Test: Electricity - 1 - Question 13

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : A tube light emits white light.

Reason : Emission of light in a tube takes place at a very high temperature

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 13
In tube light, the gas contains vapour of metals. In metallic atoms, electronic transition occurs due to which light of a particular wavelength is emitted. So emission of whit light is due to electronic transition and not due to vibration of atoms as in hot substance. SO, assertion is true but reason is false.
Assertion & Reason Test: Electricity - 1 - Question 14

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : Bending a wire does not affect electrical resistance.

Reason : Resistance of wire is proportional to resistivity of material.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 14

Resistance of wire R =

Where p is resistivity of material which does not depend on the geometry of wire. Since when wire is bent, resistivity, length and area of cross-section do not change, therefore resistance of wire also remains same.

Assertion & Reason Test: Electricity - 1 - Question 15

Directions: In the following questions, a statement of assertion (A) is followed by a statement of reason (R). Mark the correct choice as:

Assertion : If a graph is plotted between the potential difference and the current flowing, the graph is a straight line passing through the origin.

Reason : The current is directly proportional to the potential difference.

Detailed Solution for Assertion & Reason Test: Electricity - 1 - Question 15
According to Ohm's law, the potential difference across a conductor is directly proportional to the current through it.

V=IR

Hence the curve is a straight line passing through the origin.

85 videos|437 docs|75 tests
Information about Assertion & Reason Test: Electricity - 1 Page
In this test you can find the Exam questions for Assertion & Reason Test: Electricity - 1 solved & explained in the simplest way possible. Besides giving Questions and answers for Assertion & Reason Test: Electricity - 1, EduRev gives you an ample number of Online tests for practice

Top Courses for Class 10

85 videos|437 docs|75 tests
Download as PDF

Top Courses for Class 10