Test: Introduction & IP Addressing- 2

Continue with Google

Continue with Facebook

I accept the Terms & Conditions.

Description

This mock test of Test: Introduction & IP Addressing- 2 for Computer Science Engineering (CSE) helps you for every Computer Science Engineering (CSE) entrance exam. This contains 15 Multiple Choice Questions for Computer Science Engineering (CSE) Test: Introduction & IP Addressing- 2 (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Introduction & IP Addressing- 2 quiz give you a good mix of easy questions and tough questions. Computer Science Engineering (CSE) students definitely take this Test: Introduction & IP Addressing- 2 exercise for a better result in the exam. You can find other Test: Introduction & IP Addressing- 2 extra questions, long questions & short questions for Computer Science Engineering (CSE) on EduRev as well by searching above.

QUESTION: 1

To prevent signal alternation, what is the max number of repeaters that can be placed on one 10 Base 5 or 10.Base 2 network?

A.
Four
B.
Five
C.
Three
D.
Any number

Solution:

Maximum 4 repeaters can be placed in one transmission path between two nodes while 5 between two nodes.

QUESTION: 2

Which IP class provides the fewest numbers of hosts?

A.
Class B
B.
Class C
C.
Class D
D.
Class A

Solution:

Number of host in class A = 2²⁴ - 2 Number of host in class B = 2¹⁶ - 2 Number of host in class C = 2⁸ - 2 Number of host in class D = 0

QUESTION: 3

A repeater takes a weak and or corrupted signal and _____ it.

A.
Amplifiers
B.
Regenerates
C.
Resembles
D.
Reroutes

Solution:

A repeater takes a weak or corrupted signal and regenerate it

QUESTION: 4

A subnet mask in class A can have ______ 1’s with the remaining bits 0’s.

A.
8
B.
4
C.
33
D.
3

Solution:

Default subnet mask of class A network 11111111-00000000-00000000-00000000
⇒ 255-0-0-0.

QUESTION: 5

To interconnect two IP classes, class A and class C networks

A.
Abridge is needed
B.
A class B network is needed
C.
A router is needed
D.
Can't say

Solution:

Router is used to connect two different class networks.

QUESTION: 6

Given an IP address 156.233.42.56 with a subnet mask of 7 bits. How many hosts and subnets are possible.

A.
126 hosts and 510 subnets
B.
128 hosts and 512 subnets
C.
510 hosts and 126 subnets
D.
512 hosts and 128 subnets

Solution:

QUESTION: 7

Class_______has the greatest number of hosts per given network address.

A.
B
B.
A
C.
D
D.
C

Solution:

Number of hosts in class A = 2²⁴ - 2 Number of hosts in class B = 2¹⁶ - 2 Number of hosts in class C = 2⁸ - 2

QUESTION: 8

The effective bandwidth is based on ______ .

A.
Average data rate
B.
Peak data rate
C.
Maximum burst size
D.
All of the above

Solution:

The effective data burst is a measure of average data rate, peak data rate and maximum data rate.

QUESTION: 9

Identify the unequal pair(s):

A.
Physical Address - MAC Address
B.
IP Address - Logical Address
C.
Ethernet-IEEE802.4
D.
Serial port - COM1

Solution:

Physical address is also known as MAC address. Logical address is also known as IP address COM1 is a communication port.

QUESTION: 10

There are three IP addresses as given below:
X = 202.23.14.150
Y = 168.19.200.12
Z = 72.192.52.210

Which of the following statements is/are correct?

A.
X is Class A, Y is Class B and Z is Class C
B.
X is Class C, Y is Class A and Z is Class B
C.
X is Class C, Y is Class B and Z is Class A
D.
X is Class A, Y is Class C and Z is Class B

Solution:

In IP add re sse s class A, B, and C used for general purpose.

QUESTION: 11

The default subnet mask for a Class B network can be

A.
255.255.255.0
B.
255.255.0.0
C.
255.255.192.0
D.
255.0.0.0

Solution:

If IP address is AND with subnet mask result will network address.
Default subnet mask:
Class A = 255.0.0.0
Class B = 255.255.0.0
Class C = 255.255.255.0

QUESTION: 12

Match List-I (Function) with List-11 (Layer) and select the correct answer using the codes given below the lists:

A.
a
B.
b
C.
c
D.
d

Solution:

Packet switching→ network iayer.
Route determination→ 4 network layer.
Flow control → datalink and transport layer.

QUESTION: 13

Match List-I (Function) with List-lI (Layer) and select the correct answer using the codes given below the lists

List-I
A. Reassembly of packets
B. Responsibility for delivery between adjacent nodes
C. Mechanical electrical and functional interface
D. Error correction and retransmission

List-II
1. Transport
2. Data link
3. Physical

A.
a
B.
b
C.
c
D.
d

Solution:

Reassembly of packets is done at transport iayer.
Responsibility for delivery between adjacent nodes is of data link layer.
Mechanical electrical and functional interface is related to physical layer.
Error correction and retransmission is done at data link layer as well as transport layer.

QUESTION: 14

A subnet mask in class A has fourteen 1’s. How many subnet does it define?