1 Crore+ students have signed up on EduRev. Have you? 
A wheel having mass m has charges +q and q on diametrically opposite points. It remains in equilibrium on a rough inclined plane in the presence of a uniform vertical electric field E. The value of E is
For rotational equilibrium , ∑τp = 0
⇒ mga cos α  qE (2a cos) = 0
⇒ E = mg/2q
The two plates X and Y of a parallel plate capacitor of capacitance C are given a charge of amount Q each. X is now joined to the positive terminal and Y to the negative terminal of a cell of emf E = Q/C.
As the emf of cell is ϵ=Q/C, charge of amount Q will flow from the positive terminal to the negative terminal of the cell through the capacitor.
As the Y is connected to the negative terminal of the cell so it is ground and the total charge on plate Y will be zero.
Here cell charge the capacitor plate X and its total charge =(Q+Q)=2Q
The energy will supply by cell is U=Cϵ^{2}
Two capacitors of capacitances 1mF and 3mF are charged to the same voltages 5V. They are connected in parallel with oppositely charged plates connected together. Then
Each plate of a parallel plate capacitor has a charge q on it. The capacitor is now connected to a battery. Now,
(a) The facing surfaces of the capacitor have equal and opposite charges
(b) The two plates of the capacitor have equal and opposite charges
(d) The outer surfaces of the plates have equal charges
Explanation:
qQ=q+QàQ=0
Please note, option (c) is incorrect the reason being why is that the battery is a source of energy not charge.
If a capacitor plates have equal charge on outside and equal charge on inside, then one can think that the charge on the plates must be equal so option (b) cannot be incorrect.
When a parallel plates capacitor is connected to a source of constant potential difference,
When two identical capacitors are charged individually to different potentials and connected parallel to each other, after disconnecting them from the source :
Two thin conducting shells of radii R and 3R are shown in the figure. The outer shell carries a charge +Q and the inner shell is neutral. The inner shell is earthed with the help of a switch S.
(A) Potential of inner shell is due to potential developed by outer shell.
(B) Since the inner shell is Earthed so its potential becomes zero.
(C) V_{inner}=(KQ/3R)+(KQI/R)=0⇒rQ'=−Q/3
(D) It capacitance becomes =(4π∈_{0}R_{1}R_{2}/R_{2}−R_{1})+4π∈R_{2}
Two capacitors of 2mF and 3mF are charged to 150 volt and 120 volt respectively. The plates of capacitor are connected as shown in the figure. A discharged capacitor of capacity 1.5 mF falls to the free ends of the wire. Then
Charge in 2μF Capacitor =300μC
Charge in 3μF Capacitor =360μC
when 1.5μF falls on the circuit ends, Redistribution of charge now will be:
Charge in 2μF Capacitor =300−xμC
Charge in 3μF Capacitor =360−xμC
Charge in 1.5μF Capacitor =xμC
By Kirchhoff Voltage Law:
x/1.5=[(300−x)/2]+[(360−x)/3]
which gives x=180μC
Therefore, Answers are A, B & C
In the circuit shown initially C_{1}, C_{2} are uncharged. After closing the switch
Here C_{1} and C_{2} are in series and the total potential between the capacitors is VT=12+6=18V
C_{eq}=4×8/4+8 =(8/3)μF and
Q_{eq}=C_{eq}V_{T}=(8/3)×18=48μC
As they are in series so the charge on each capacitor is equal to Q_{eq}=48μC.
∴Q_{1}=Q_{2}=48μC
Potential across C_{1} is V_{1}= Q_{1}/C_{1} =48/4=12V
Potential across C_{2} is V_{2}= Q_{2}/C_{2} =48/8=6V
A circuit shown in the figure consists of a battery of emf 10V and two capacitance C_{1 }and C_{2} of capacitances 1.0mF and 2.0mF respectively. The potential difference V_{A} – V_{B} is 5V
V_{A}−q1+10−(q/2)=VBVAq1+10q2=V_{B}
V_{A}−V_{B}+10=(q/1)+q2VAVB+10=q1+q2
5+10=3q/2⇒q=10μC
V_{1}=10μC/1μF=10,& V_{2}=10μC/2μF=5V
U_{1}=q^{2}/(2×C1),&U_{2}=q^{2}/2C2
Since C_{2}=2C_{1} so U_{1}=2U_{2}
Two capacitors of equal capacitance (C_{1} = C_{2}) are shown in the figure. Initially, while the switch S is open, one of the capacitors is uncharged and the other carries charge Q_{0}. The energy stored in the charged capacitor is U_{0}. Sometimes after the switch is colsed, the capacitors C_{1} and C_{2} carry charges Q_{1} and Q_{2}, respectively, the voltages across the capacitors are V_{1} and V_{2}, and the energies stored in the capacitors are U_{1} and U_{2}. Which of the following statements is INCORRECT ?
Identify the correct statements.
A solid conducting sphere of radius 10 cm is enclosed by a thin metallic shell of radius 20 cm. A charge q = 20 mC is given to the inner sphere. Find the heat generated in the process, the inner sphere is connected to the shell by a conducting wire 
On connecting, the entire amount of charge will shift to the outer sphere. Heat generated is
U_{i}−U_{f}= (q^{2}/8πε_{0}R_{1}) – (q^{2}/8πε_{0}R_{2})
=[(20×10^{−6})×9×10^{9}/2] [(1/0.10)−10.20]=9J
The plates of a parallel plate capacitor are given charges +4Q and _2Q. The capacitor is then connected across an uncharged capacitor of same capacitance as first one (= C). Find the final potential difference between the plates of the first capacitor.
Based on the symmetry of charges at equilibrium condition, +4Q will divide into −2Q each. Similarly−2Q will divide into −Q each.
Effectively capacitance=C+C=2C
So, the final potential difference = 2Q−(Q)/ 2C =3Q/2C
Three capacitors of 2 µF, 3 µF and 5 µF are independently charged with batteries of emf’s 5V, 20V and 10V respectively. After disconnecting from the voltage source. These capacitors are connected as shown in figure with their positive polarity plates connected to A and negative polarity is earthed. Now a battery of 20V and an uncharged capacitor of 4 µF capacitance are connected to the junction A as shown with a switch S. when switch is closed, find:
(a) The potential of the junction A.
(b) Final charge on all four capacitros.
Positive mutual potential energy of a system containing two charges corresponds to
A charge q = 1.0 C moves distance of 1.5 m in the direction of a uniform electric field E of magnitude 2.0 N/C. Find its change in electrostatic potential energy.
△U=?
△U=q△v
=Ercosθ
=2x1.5
=3v
Therefore, △U=1x3
=3J [answer]
Two uniformly charged nonconducting spheres, each of radius R, are fixed in a gravity free space as shown in the figure. If an electron is released at rest from the point A, then its speed just before striking the other sphere is [mass of electron  m_{e}]
using the conservation of mechanical energy, we get
12 docs1493 tests

Use Code STAYHOME200 and get INR 200 additional OFF

Use Coupon Code 
12 docs1493 tests








