Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  GATE Civil Engineering (CE) 2025 Mock Test Series  >  Test: Principal Stress & Strain - 2 - Civil Engineering (CE) MCQ

Test: Principal Stress & Strain - 2 - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test GATE Civil Engineering (CE) 2025 Mock Test Series - Test: Principal Stress & Strain - 2

Test: Principal Stress & Strain - 2 for Civil Engineering (CE) 2024 is part of GATE Civil Engineering (CE) 2025 Mock Test Series preparation. The Test: Principal Stress & Strain - 2 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Principal Stress & Strain - 2 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Principal Stress & Strain - 2 below.
Solutions of Test: Principal Stress & Strain - 2 questions in English are available as part of our GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) & Test: Principal Stress & Strain - 2 solutions in Hindi for GATE Civil Engineering (CE) 2025 Mock Test Series course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Principal Stress & Strain - 2 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Principal Stress & Strain - 2 - Question 1

If the principal stresses at point in a strained body are p1 and p2 ( p1 > p2), then th e resu lta n t stress on a plane carrying the maximum shear stress is equal to

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 1

Plane of maximum shear is at 45°

Test: Principal Stress & Strain - 2 - Question 2

If ∈1 and ∈2 ( ∈1 > ∈2) are the m axim um and minimum strains in the neighbourhood of a point in a stressed material of Young’s modulus E and Poisson’s ratio p, then the maximum principal stress will be given by

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 2

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Principal Stress & Strain - 2 - Question 3

On the element shown below in the figure, the stress in MPa are

The radius of Mohr’s circle V and principal stresses σ1, and σ2 are in (MPa) respectively

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 3


⇒ σ1,2 = 70 ± 50
∴ σ1 = 120 MPa
and σ2 = 20 MPa
and, radius of Mohr's circle

Test: Principal Stress & Strain - 2 - Question 4

The radius of Mohr’s circle gives the value of

Test: Principal Stress & Strain - 2 - Question 5

 A body is subjected to two normal strains of magnitude ∈x = 0.003 and ∈y = 0.002. The shearing strain on a plane inclined at 30° with ∈x is

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 5

Shearing strain 
= (∈x - ∈y) sin2θ
= (0.003 - 0.002)sin60°
= √3/2 x 10-3

Test: Principal Stress & Strain - 2 - Question 6

Which one of the following Mohr’s circles represents the state of pure shear?

Test: Principal Stress & Strain - 2 - Question 7

 A bar is subjected to a uniaxial tensile stress ‘σ’. The tangential stress on a plane inclined at θ to the bar would be

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 7

Normal sress = σ cos2 θ
Tangential Stress = σ sin θ cos θ

= σ sin 2θ/2

Test: Principal Stress & Strain - 2 - Question 8

Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by shear stress?

Test: Principal Stress & Strain - 2 - Question 9

Normal stresses of equal magnitude a, but of opposite signs, act at a point of a strained material in perpendicular direction. What is the magnitude of the stress on a plane inclined at 45° to the applied stresses?

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 9


Here, σx = σy = -σ and θ = 45°
∴ σθ = 0

Test: Principal Stress & Strain - 2 - Question 10

Two planes xyand yz are passing through a point in a strained material. The normal and shear stresses on xy plane are +80 MPa, -30 MPa respectively and normal and shear stresses on plane yz are +30 MPa and +30 MPa respectively. What is the angle between the planes?

Detailed Solution for Test: Principal Stress & Strain - 2 - Question 10


31 docs|280 tests
Information about Test: Principal Stress & Strain - 2 Page
In this test you can find the Exam questions for Test: Principal Stress & Strain - 2 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Principal Stress & Strain - 2, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)