Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  GATE Civil Engineering (CE) 2025 Mock Test Series  >  Test: Linear Measurement - 2 - Civil Engineering (CE) MCQ

Test: Linear Measurement - 2 - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test GATE Civil Engineering (CE) 2025 Mock Test Series - Test: Linear Measurement - 2

Test: Linear Measurement - 2 for Civil Engineering (CE) 2024 is part of GATE Civil Engineering (CE) 2025 Mock Test Series preparation. The Test: Linear Measurement - 2 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Linear Measurement - 2 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Linear Measurement - 2 below.
Solutions of Test: Linear Measurement - 2 questions in English are available as part of our GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) & Test: Linear Measurement - 2 solutions in Hindi for GATE Civil Engineering (CE) 2025 Mock Test Series course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Linear Measurement - 2 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Linear Measurement - 2 - Question 1

The length of a line measured with a 20 metre chain was found to be 250 metres. What is the true length of line if the chain was 10 cm too long

Detailed Solution for Test: Linear Measurement - 2 - Question 1

The true length of fine is given by,

Test: Linear Measurement - 2 - Question 2

During the measurement of a line by chain or tape in slopes, if the length of line is ‘l’ and height difference between the ends of the line is ‘h’ then the correction to the measured length is more than h2/2l by

Detailed Solution for Test: Linear Measurement - 2 - Question 2

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Linear Measurement - 2 - Question 3

The required slope correction for a length of 60 m along a gradient of 1 in 20 is

Detailed Solution for Test: Linear Measurement - 2 - Question 3



Correction = 0.075 m = 7.5 cm

Test: Linear Measurement - 2 - Question 4

A 30 m steel tape was standardized at 20°C and measurements of distances were taken at 15°C. if the coefficient of linear expansion α of the material of the tape were 0.000112 per °C, then error due to temperature per tape length would be

Detailed Solution for Test: Linear Measurement - 2 - Question 4

The formula for correction C = α(tm - t)L.
So,α = 0.0000112.
Also l = 30m.
Also, temp measured = 15 degrees.
And temp star = 20 degree.
Solving we get -0.001680 but in the question it
Is for per metre tape length so divide by 30.
We get a correction - 0.0000560 

Test: Linear Measurement - 2 - Question 5

A 100 m tape is suspended between the ends under a pull of 200 N. The weight of the tape is 30 N. The correction for sag and correct distance between the tape ends is

Detailed Solution for Test: Linear Measurement - 2 - Question 5



Correct distance = 100 - 0.094 = 99.906 m

Test: Linear Measurement - 2 - Question 6

Distance between two stations A and B can be precisely measured with one complete Gunter’s chain and one complete Engineer’s chain. The distance between A and B is

Detailed Solution for Test: Linear Measurement - 2 - Question 6

Gunter’s chain is 66 ft long & Engineer’s chain is 100 ft long.
Distance between A & B
= 100 + 66 = 166 ft

Test: Linear Measurement - 2 - Question 7

The downhill end of a 30 m tape is held 90 cm too low. What is the horizontal distance measured

Detailed Solution for Test: Linear Measurement - 2 - Question 7

Correction for slope

∴ Horizontal distance
= 30 - 0.0135 = 29.9865 m

Test: Linear Measurement - 2 - Question 8

The distance between the points measured along a slope is 428 m. If the angle of slope between the points is 8° than the horizontal distance between them is

Detailed Solution for Test: Linear Measurement - 2 - Question 8

Horizontal distance = l cosθ
= 428 cos8° = 423.83 m

Test: Linear Measurement - 2 - Question 9

A line of true length 500 m when measured by a 20 m tape is reported to be 502 m long. The correct length of the tape is

Detailed Solution for Test: Linear Measurement - 2 - Question 9

Correct length of tape 

Test: Linear Measurement - 2 - Question 10

A 20 m chain was found to be 10 cm too long after chaining a distance of 2000 m. It was found to be 18 cm too long at the end of the day’s work after chaining a total distance of 4000 m. What is the true distance if the chain was correct before the commencement of the day’s work?

Detailed Solution for Test: Linear Measurement - 2 - Question 10

For the first 2000 m, average error is,


For the next 2000 m, average error is 



Hence, true distance,

31 docs|280 tests
Information about Test: Linear Measurement - 2 Page
In this test you can find the Exam questions for Test: Linear Measurement - 2 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Linear Measurement - 2, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)