Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  RCFL MT Mechanical Mock Test Series 2025  >  RCFL MT Mechanical Mock Test - 8 - Mechanical Engineering MCQ

RCFL MT Mechanical Mock Test - 8 - Mechanical Engineering MCQ


Test Description

30 Questions MCQ Test RCFL MT Mechanical Mock Test Series 2025 - RCFL MT Mechanical Mock Test - 8

RCFL MT Mechanical Mock Test - 8 for Mechanical Engineering 2025 is part of RCFL MT Mechanical Mock Test Series 2025 preparation. The RCFL MT Mechanical Mock Test - 8 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The RCFL MT Mechanical Mock Test - 8 MCQs are made for Mechanical Engineering 2025 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for RCFL MT Mechanical Mock Test - 8 below.
Solutions of RCFL MT Mechanical Mock Test - 8 questions in English are available as part of our RCFL MT Mechanical Mock Test Series 2025 for Mechanical Engineering & RCFL MT Mechanical Mock Test - 8 solutions in Hindi for RCFL MT Mechanical Mock Test Series 2025 course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt RCFL MT Mechanical Mock Test - 8 | 100 questions in 90 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study RCFL MT Mechanical Mock Test Series 2025 for Mechanical Engineering Exam | Download free PDF with solutions
RCFL MT Mechanical Mock Test - 8 - Question 1

The bending moment diagram for the case shown below in Figure will be:

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 1
Here RA = RB = W

Between A to C:

Mx = W × x ⇒ Ma = 0,Mc = Wa

Between C to D:

Mx = W × x − W(x−a) ⇒ MD = W × 4a − W(4a−a) = Wa

Between D to B:

Mx = W × x − W(x−a) − W(x−4a) ⇒ MB = W × 5a − W(5a−a) − W(5a−4a) = 0

RCFL MT Mechanical Mock Test - 8 - Question 2

Power is transmitted by the lead screw to carriage through

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 2

From the lead screw, the motion is transmitted to the carriage by engaging the half nut with the lead screw.

The cutting tool moves with the lathe carriage by the engagement of a half nut with the lead screw.

Acme threads are used in lathe lead screws. This form of thread enables the easy engagement of the half nut.

RCFL MT Mechanical Mock Test - 8 - Question 3

A centre zero ohmmeter connected in the rotor circuit of 6-pole 50 Hz induction motor makes30 oscillations in one minutes. The rotor speed is

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 3

RCFL MT Mechanical Mock Test - 8 - Question 4

Thread angle of BSW thread in degree is

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 4
The principal features of the British Standard Whitworth (BSW) thread form are that the angle between the thread flanks is 55 degrees, and the thread has radii at both the roots and the crests of the thread.

P= Pitch

d= depth of thread

r= radius at crest and root

RCFL MT Mechanical Mock Test - 8 - Question 5

The pressure inside a water droplet is given by the relation

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 5
It is because of surface tension that the pressure of a liquid increases within a bubble. If the pressure forces inside the bubble balance the force due to surface tension at the edge, we have

2πrσ = pπr2

p = 2σ/r

or

p = 4σ/d

So option A is correct.

RCFL MT Mechanical Mock Test - 8 - Question 6

Which of the following sand types is excellent for use in mortar and concrete work?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 6
Pit sand doesn’t contain any salts and has sharp, angular grains. These are the desired properties for sand to be used for mortar and concrete.

Hence, the correct option is (C).

RCFL MT Mechanical Mock Test - 8 - Question 7

Whenever a material is loaded within the elastic limit, stress is _______ strain.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 7

Within the elastic limit, the stress vs. strain curve of material follows Hooke’s Law.

Or, According to Hooke’s Law, whenever a material is loaded within the elastic limit,

Stress is directly proportional to strain.

Hooke’s Law, Stress ∝ Strain

i.e. σ ∝ ϵ or σ = E ϵ

where, σ = stress (N/m2)

ϵ = strain (m/m)

and E = Young’s Modulus of Elasticity (N/m2).

RCFL MT Mechanical Mock Test - 8 - Question 8

What is the difference in pressure head, measured by a mercury-oil differential manometer for a 20 cm difference of mercury level? (Specific Gravity of oil = 0.8)

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 8

A simple manometer to measure gauge pressure

hA = x + y; hB = x

hAsA = hBsB

⇒ 0.20 × 13.6 = hB × 0.8

⇒ hB = 3.4 m

RCFL MT Mechanical Mock Test - 8 - Question 9

The Mercury is known as non-wetting liquid because it does not wet the surface. The Mercury posses this property due to

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 9

Correct Answer :- a

Explanation : Capillarity is the property of both cohesion and adhesion. But surface tension is due to cohesion only it does not involve adhesion. As cohesive force is higher than adhesion in mercury it does not wet the glass.

RCFL MT Mechanical Mock Test - 8 - Question 10

A submerged body will be in stable equilibrium if the

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 10

Stability of unconstrained Submerged Bodies in Fluid:

The equilibrium of a body submerged in a liquid requires that the weight of the body acting through its centre of gravity should be colinear with an equal hydrostatic lift acting through the centre of buoyancy.

- Stable Equilibrium: If the body returns to its original position by retaining the originally vertical axis as vertical

- Unstable Equilibrium: If the body does not return to its original position but moves further from it

- Neutral Equilibrium: If the body neither returns to its original position nor increases its displacement further, it will simply adopt its new position.

The relative position of the centre of gravity (G) and centre of buoyancy (B) of a body determines the stability of a submerged body.

Stable Equilibrium: B is above G

Free surface

A Submerged body in Stable Equilibrium

- Unstable Equilibrium: B is below G

RCFL MT Mechanical Mock Test - 8 - Question 11

What will be the effect on eccentricity ratio for a hydrodynamic journal bearing if there is an increase in the diameter of the journal (Assume other parameters as constant)?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 11

RCFL MT Mechanical Mock Test - 8 - Question 12

Which of the following mode of metal transfer is preferred in overhead welding?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 12

The short circuit transfer mode is typically found in solid MIG or metal-cored wires when the ratio of Argon in the shielding gas is 75 to 85% Argon, and the welding voltage is low. In the globular transfer mode, the weld metal transfers across the arc in a gravity feed.

RCFL MT Mechanical Mock Test - 8 - Question 13

A reversible heat engine runs between high temperature T1 and low temperature T2. The work output of this heat engine is used to run a reversible refrigeration cycle absorbing heat at temperature T2. What is the COP of the combined system ?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 13

RCFL MT Mechanical Mock Test - 8 - Question 14

The energy loss inflow through a nozzle as compared to a venturi meter is

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 14
The flow nozzle is essentially a venturi meter with the divergent part omitted. Therefore the basic equations for the calculation of flow rate are the same as those for a venturi meter. The dissipation of energy downstream of the throat due to flow separation is greater than that for a venturi meter. But this disadvantage is often offset by the lower cost of the nozzle. Flow nozzle(top) and venturimeter(bottom) diagram is given below.

RCFL MT Mechanical Mock Test - 8 - Question 15

Direction: Choose the option closest in meaning to the OPPOSITE of the word given in capitals.

TIRADE

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 15

Tirade is a speech of criticism or denunciation, hence adoration is an antonym

RCFL MT Mechanical Mock Test - 8 - Question 16

Directions: In this question, you need to replace the underlined part of the sentence with the most suitable idiom/expression given as option.

He was not agreeing to back off, as if he was arguing just for the sake of it.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 16

As per the meanings given below, the correct idiom will be ‘playing devil’s advocate’.
Take a rain check: postpone a plan.
Rain on someone’s parade: to spoil a moment.
Play devil’s advocate: to argue, just for the sake of it.
Play by the ear: to improvise.
Correct Sentence:
He was not agreeing to back off, as if he was playing devil’s advocate.
Hence, the correct answer is option C. 

RCFL MT Mechanical Mock Test - 8 - Question 17

Direction: In the following question, the sentences have been given in Active/ Passive Voice. From the given alternatives, choose the one which best expresses the given sentence in Passive/ Active Voice.

The boy did not break the glass.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 17

We can say that ,
The above given sentence is given in Passive Voice :-
Use structure “subject + auxiliary + past participle + by + object”
The glass was not broken by the boy.
Hence , required answer will be option A .

RCFL MT Mechanical Mock Test - 8 - Question 18

Murphy Mole is the protagonist in the new novel by Trent Troll. Murphy must stop Oscar Rat and Shrimpy Shark from enslaving the inhabitants of Lazy Woods Park. He risks his life in a series of events that lead to a final battle between good and evil. What is a "protagonist"?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 18

Protagonist means the leading character or one of the major characters in a play, film, novel, etc

RCFL MT Mechanical Mock Test - 8 - Question 19

A man covered a certain distance at some speed. If he had moved 3 kmph faster, he would have taken 40 minutes less. If he had moved 2 kmph slower, he would have taken 40 minutes more. What is the the distance in km?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 19

RCFL MT Mechanical Mock Test - 8 - Question 20

A person has to cover 72 km. He travels at 9 km/hr and stops for 10 minutes after every 18 km. How much time will he take to reach his destination?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 20



Hence, Option C is correct.

RCFL MT Mechanical Mock Test - 8 - Question 21

The value of  is  :- 

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 21

(1 - 10)/(9 + (-3))

=-9/6 = -3/2

RCFL MT Mechanical Mock Test - 8 - Question 22

Find the volume of a cuboid whose length is 8 cm, width is 3 cm and height is 5 cm. 

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 22
Volume of cubiod =l×b×h
=8×3×5
=120cm3 .
RCFL MT Mechanical Mock Test - 8 - Question 23

A, B, C and D are four numbers. D is 80% of C which is 20% less than B, which is 200% more than A. If the difference between A and D is 46, what is the value of B?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 23

D : C = 80 : 100 = 4 : 5
C : B = (100 – 20) : (100) = 4 : 5
B : A = 300 : 100 = 3 : 1
A : B : C : D = 25 : 75 : 60 : 48

Hence, Option D is correct.

RCFL MT Mechanical Mock Test - 8 - Question 24
Rita and Meena together can complete a piece of work in 10 days, while Rita alone can complete the same work in 15 days. In how many days will Meena alone complete the work?
Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 24

Given:

Number of work completed by Rita and Meena = 10 days

Number of work completed by Rita alone = 15 days

Formula used:

Work = Efficiency × Time

Calculation:

LCM of 10 and 15 is 30

Efficiency of Rita and Meena = (30/10) = 3 units/day

Efficiency of Rita = (30/15) = 2 units/day

Efficiency of Meena = [30/(3 – 2)] units/day

⇒ (30/1) unit/day

⇒ 30 days

∴ The required time to complete the work by Meena is 30 days

RCFL MT Mechanical Mock Test - 8 - Question 25

Direction: Study the following question carefully and choose the right answer.

If ACNE can be coded as 3, 7, 29, 11 then BOIL will be coded as ….?

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 25

In the given coding system, we have:

So, the code for BOIL is 5, 31, 19, 25.
Hence, option D is correct.

RCFL MT Mechanical Mock Test - 8 - Question 26

Directions: Each of the following consists of a question and two statements numbered I and II given below it. You have to decide whether the data provided in the statements are sufficient to answer the question.

Q. Who is the brother-in-law of A?

I. A is the sister of C, who is the daughter-in-law of M. M has only two children’s.
II. O is the wife of M, who is the sibling of Q. B, is the only male child of O.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 26

From Statement I:
A is the sister of C, who is the daughter-in-law of M. M has only two children.
From, this statement, we can arrange the family tree as possible-

So, from this statement, we cannot determine the brother-in-law of A.
From Statement II:
O is the wife of M, who is the sibling of Q. B is the only male child of O.
From this statement, we can draw the family tree as follow:

So, from this statement, we cannot determine the brother-in-law of A.
From Statement I and Statement II together:
A is the sister of C, who is the daughter-in-law of M. M has only two children. O is the wife of M, who is the sibling of Q. B is the only male child of O.
From this statement, we can draw the family tree as follow:

So, from both statements, B is the brother-in-law of A.
Hence option D is correct.

RCFL MT Mechanical Mock Test - 8 - Question 27

Select the number which can be placed at the sign of the question mark (?) from the given alternatives.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 27

The logic follows here is:

Middle number = square root of first number + third number.

Row-wise operation :

(25, 41, 36)

middle number = 41

= √25 + 36

= 5 + 36

= 41

(49, 45, 38)

middle number = 45

= √49 + 38

= 7 + 38

= 45

Similarly

(36, ?, 62)

middle number = ?

= √36 + 62

= 6 + 62

= 68

Hence, the correct answer is "68"

Additional Information

The most common pattern asked in exams are based on:

  • It could be the sum of two numbers divided by a constant
  • It could be the average of numbers.
  • It could be in the form of alphabets, where alphabets are increased by constant or increased by the square of numbers or increased by prime numbers.
  • It could be the difference of product of two diametrically opposite numbers.
  • It could be the difference in the sum of adjacent numbers.
  • The difference of the numbers could be in the patterns 1± 1, 2± 1,  and so on.
  • The difference of the numbers could be in the patterns 1± 1, 2± 1, and so on.
  • Numbers could be 12, 22, 32, and so on or 13, 23, 33, and so on.
  • The difference could be prime numbers or the difference could be the square of prime numbers.
  • The difference could be in the form of N± N or N± N.
  • The difference could be in the form of ×N + N or ×2 + 1, ×2 + 2, ×2 + 3, and so on.
  • The difference could be in the form of ×2 ± 1 alternatively.
  • Numbers could be ×1, ×2, ×3, and so on. 
RCFL MT Mechanical Mock Test - 8 - Question 28
Who is the founder of Modern Punjabi literature?
Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 28

The correct answer is 'Bhai Veer Singh'.

Key Points

  • Bhai Veer Singh is the founder of Modern Punjabi literature.
  • He was an Indian poet, scholar, and theologian of the Sikh revival movement.
  • He played an important part in the renewal of the Punjabi literary tradition.
  • Bhai Veer Singh was one of the founders of the Punjab & Sind Bank.
  • He was honored with the Sahitya Akademi Award in 1955 and the Padma Bhushan Award in 1956.

Additional Information

  • Nanak Singh
    • Nanak Singh was an Indian poet, songwriter, and novelist of the Punjabi language.
    • His literary works in support of India's independence movement led the British to arrest him.
    • He published novels that won him literary acclaim.
  • Professor Mohan Singh
    • Professor Mohan Singh was a noted Indian poet in the Punjabi language.
    • He was one of the early pioneers of modern Punjabi poetry.
  • Amrita Pritam
    • Amrita Pritam was an Indian novelist, essayist, and poet, who wrote in Punjabi and Hindi.
    • A prominent figure in Punjabi literature, she is the recipient of the 1956 Sahitya Akademi Award.
    • She is considered the first eminent female Punjabi writer, novelist, and poet of the 20th century.
    • Her writing is equally loved by the people of India and Pakistan.
RCFL MT Mechanical Mock Test - 8 - Question 29

Why Swadeshi movement fizzled out? 

1. Severe government repression

2. Lack of effective organization and disciplined focus 

3. Split in Nationalist ranks 

4. Narrow social base 

5. Leaderless movement 

Choose from the following options.

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 29
Why the Swadeshi Movement fizzled out by 1908: Severe government repression, Lack of effective organization and a disciplined focus. With arrest/deportation of all leaders, the movement left leaderless. Split in nationalist ranks. Narrow social base.

RCFL MT Mechanical Mock Test - 8 - Question 30

Cotton is a______________ product and cloth is a_______________ product

Detailed Solution for RCFL MT Mechanical Mock Test - 8 - Question 30
Cotton is a natural product obtained from agriculture which comes under the primary sector. From the cotton, yarn is spun, and textiles are made whose end product is cloth. And this processing of cotton comes under the secondary sector. The cloth is not produced by nature but has to be made, and therefore some process of manufacturing is essential.

View more questions
10 tests
Information about RCFL MT Mechanical Mock Test - 8 Page
In this test you can find the Exam questions for RCFL MT Mechanical Mock Test - 8 solved & explained in the simplest way possible. Besides giving Questions and answers for RCFL MT Mechanical Mock Test - 8, EduRev gives you an ample number of Online tests for practice
Download as PDF