Bipolar Junction Transistor MSQ - Physics MCQ

An oscillator is a system consisting of active and passive circuit elements to produce a sinusoidal or other respective waveforms at the output without the amplification of an external source (signal). It transforms the dc power from the source to the ac power in the load.
This consists of a positive feedback amplifier and has noise as the initial signal and consists of a frequency signal selector.
The correct answers are: consists of a positive feedback amplifier, has noise as the initial signal, consists of a frequency selecting network

For maintaining oscillation in an oscillator, all the four options above are required which are positive feedback, phase shifting network, non-linear biasing circuit and high gain amplifier. Without any one of the above, we will not obtain a sustained oscillation in an oscillator.
The correct answers are: Positive feedback, Design of load (phase shifting network), Non-linear biasing circuit, High gain amplifier

Emitter-base junction current and base-collector current are mainly due to diffusion current.
The correct answers are: emitter-base junction current, base-collector junction current

If BJT connected in common emitter configurations, the power gain is highest, voltage gain is medium, input impedence is low.
The correct answers are: Voltage gain is medium, Low input impedance , Highest power gain

The dc load line has a negative slope and Q-point lies on this line.
The correct answers are: contains the Q - point, has a negative slope

The stability of an oscillator depends on (i) inter element capacitances and stray capacitances (ii) temperature variation (iii) size of coil used It does not depend on the load.
The correct answers are: coil size, temperature variation, Inter element capacitances and stray capacitances

Negative feedback amplifiers are specifically designed to improve the stability of the amplifier, decrease the distortion of the amplifiers, noise in the amplifier and bandwidth of the amplifier.
The correct answers are: Distortion of the amplifier decreases, Noise of the amplifier decreases, Bandwidth of the amplifier decreases

An electronic oscillator gives sustained oscillations when the feedback is negative and in phase with the input.
The correct answers are: negative, in phase with the input

Here, the transistor is being driven into saturation which is also a non-linear response. The transistor will not be driven into the cut-off region.
The correct answers are: being driven into stauration, operating non-linearly