Test: Highway Geometric Design -1 - Civil Engineering (CE) MCQ

The camber is given a parabolic, elliptic or straight line shape in the cross-section. Parabolic or elliptic shape is given so that the profile is flat at the middle and steeper towards the edges, which is preferred by fast moving vehicles.
When very flat cross slope is provided as in cement concrete pavements, straight line shape of camber may be provided.

Skid occurs when vehicles slide without revolving or when the wheels partially revolve i.e., when the path travelled along the road surface is more than the circumferential movements of the wheels due to their rotation. Slip occurs when a wheel revolves more than the corresponding longitudinal movement along the roads.

The coefficient of friction reduces considerably when the pavement surface is smooth or wet. The coefficient of friction also decreases slightly with increase in temperature, tyre pressure and load. But on wet pavements new tyres with good treads give higher friction factors than worn out tyres.

When there is a descending gradient the component of gravity is subtracted from the braking distance and hence the stopping sight distance is more.

The minimum length of overtaking zone should be three times the safe overtaking distance i.e., 3(d₁ + d₂) for one-way roads and 3(d₁ + d₂ + d₃) for two-way roads. It is desirable that the length of overtaking zone is kept five times the overtaking sight distance.

The minimum stopping sight distance should be equal to the stopping distance in one-way traffic lanes and also in two-way traffic roads when there are two or more traffic lanes.

As we know,

e = rate of superelevation
f = lateral friction coefficient = 0.15
V = speed of vehicle, m/s
R = radius of horizontal curve, m
g = acceleration due to gravity = 9.8 m/s²
If speed of vehicle is represented as \/kmph then,

If f = 0, the equilibrium superelevation required to counteract the centrifugal force fully will be given by,

The method of rotating about inner edge is preferable in flat terrain in high rain fall area, when the road is not taken on embankment, in order to avoid the drainage problem.