Test: Laminar Flow in Pipes - 2

6 Questions MCQ Test GATE Civil Engineering (CE) 2022 Mock Test Series | Test: Laminar Flow in Pipes - 2

This mock test of Test: Laminar Flow in Pipes - 2 for Civil Engineering (CE) helps you for every Civil Engineering (CE) entrance exam. This contains 6 Multiple Choice Questions for Civil Engineering (CE) Test: Laminar Flow in Pipes - 2 (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Laminar Flow in Pipes - 2 quiz give you a good mix of easy questions and tough questions. Civil Engineering (CE) students definitely take this Test: Laminar Flow in Pipes - 2 exercise for a better result in the exam. You can find other Test: Laminar Flow in Pipes - 2 extra questions, long questions & short questions for Civil Engineering (CE) on EduRev as well by searching above.

A fluid of kinematic viscosity 0.4 cm2/sec flows through a 8 cm diameter pipe. The maximum velocity for laminar flow will be


Maximum Reynold's number for laminar flow = 2000


On a flat plate, point A is at the mid-section and point B is the trailing edge. The shear stresses τA at A and τB at B are such that


In a two-dimensional flow of a viscous fluid couette flow is defined for


Coutte flow is characterized as flow of very low value of Reynolds number between two parallel plate, one is fixed and other is movable.


Consider the following statements regarding the laminar flow through a circular pipe:
1. The friction factor is constant.
2. Thp friction factor dspends Upon the pipe roughness.
3. The friction factor varies inversely with the Reynolds number of flow.
4. The velocity distribution is parabolic.
5. The pressure drop varies directly with the mean velocity.
Of these statements:


For laminar flow th rough circular pipe  It is neither constant, and does not depend on pipe roughness. 
As head loss varies directly with mean velocity so pressure drop also.


The velocity profile in fully developed laminar flow in a pipe of diameter D is given by u = u0(1 - 4r2/D2), where r is the radial distance from the center. If the viscosity of the fluid is μ, the pressure drop across a length L of the pipe is


We Know that,
Pressure drop across a length L of pipe is


Laminar developed flow at an average velocity of 5 m/s occurs in a pipe of 10 cm radius. The velocity at 5 cm radius is


Similar Content

Related tests