Class 7 Exam > Class 7 Notes > Science Class 7 > Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7 PDF Download
| Download, print and study this document offline |
Please wait while the PDF view is loading
Page 1
CBSE VII | SCIENCE
Sample Paper – 2 Solution
CBSE Board
Class VII Science
Sample Paper – 2 Solution
Term II
SECTION A
1. (d)
Sphygmomanometer is used to measure the blood pressure.
2. (b)
Seed formation takes place during sexual reproduction in plants. Cutting, grafting and
tissue culture are methods of propagating plants asexually.
3. (b)
Deforestation is the process of cutting more and more tress from the forests to
accommodate growing population and to provide space for industries.
4. (a)
Oxygen is a renewable resource because it is continuously supplied by plants during
photosynthesis.
5. (b)
In the method of galvanization, surface of iron is coated with a layer of more active
metal like zinc.
Zinc metal prevents the surface of iron from coming in the contact with air and
moisture and thus, protects it from rusting.
6. (a)
In a chemical change, new products are formed. The new substances formed have
properties entirely different from the original substances.
Ca(OH) 2 + 2 HCl ? CaCl 2 + 2 H 2O
7. (a)
Burning of a magnesium ribbon is a chemical change. When magnesium ribbon is held
over the flame of a burner, it burns with a dazzling white light to give a new substance
called magnesium oxide.
2Mg + O 2 ? 2MgO
Magnesium Oxygen Magnesium oxide
Page 2
CBSE VII | SCIENCE
Sample Paper – 2 Solution
CBSE Board
Class VII Science
Sample Paper – 2 Solution
Term II
SECTION A
1. (d)
Sphygmomanometer is used to measure the blood pressure.
2. (b)
Seed formation takes place during sexual reproduction in plants. Cutting, grafting and
tissue culture are methods of propagating plants asexually.
3. (b)
Deforestation is the process of cutting more and more tress from the forests to
accommodate growing population and to provide space for industries.
4. (a)
Oxygen is a renewable resource because it is continuously supplied by plants during
photosynthesis.
5. (b)
In the method of galvanization, surface of iron is coated with a layer of more active
metal like zinc.
Zinc metal prevents the surface of iron from coming in the contact with air and
moisture and thus, protects it from rusting.
6. (a)
In a chemical change, new products are formed. The new substances formed have
properties entirely different from the original substances.
Ca(OH) 2 + 2 HCl ? CaCl 2 + 2 H 2O
7. (a)
Burning of a magnesium ribbon is a chemical change. When magnesium ribbon is held
over the flame of a burner, it burns with a dazzling white light to give a new substance
called magnesium oxide.
2Mg + O 2 ? 2MgO
Magnesium Oxygen Magnesium oxide
CBSE VII | SCIENCE
Sample Paper – 2 Solution
8. (d)
Boiling of water, melting of ice and lightning of bulb is a physical change. No chemical
reaction takes place and no new products are formed. However, rusting of iron is a
chemical change. Iron article chemically reacts with air and moisture to form a flaky
reddish brown layer of hydrated iron (III) oxide, known as rust.
9. (d)
Sodium hydroxide base is used in the soap and detergent industry.
10. (d)
The filament of an electric bulb is made of a thin wire of tungsten.
11. (d)
Compact fluorescent lamps (CFLs) reduce wastage of electricity and can be fixed in
ordinary bulb holders.
12. (d)
A current carrying coil of an insulated wire wrapped around a piece of iron is called an
electromagnet.
13. (b)
A non-luminous object does not produce its own light, but reflects light from other
sources.
14. (b)
An image formed by a plane mirror is erect and of the same size as the object.
15. (a)
Absorber of radiant energy
SECTION B
16. Septic tanks are low cost onsite sewage disposal systems suitable for places where
there is no sewerage system. It can be used for hospitals, isolated buildings or a cluster
of 4 to 5 houses.
17.
(a) Mango, apple and orange. (Any two)
(b) Castor and balsam
Page 3
CBSE VII | SCIENCE
Sample Paper – 2 Solution
CBSE Board
Class VII Science
Sample Paper – 2 Solution
Term II
SECTION A
1. (d)
Sphygmomanometer is used to measure the blood pressure.
2. (b)
Seed formation takes place during sexual reproduction in plants. Cutting, grafting and
tissue culture are methods of propagating plants asexually.
3. (b)
Deforestation is the process of cutting more and more tress from the forests to
accommodate growing population and to provide space for industries.
4. (a)
Oxygen is a renewable resource because it is continuously supplied by plants during
photosynthesis.
5. (b)
In the method of galvanization, surface of iron is coated with a layer of more active
metal like zinc.
Zinc metal prevents the surface of iron from coming in the contact with air and
moisture and thus, protects it from rusting.
6. (a)
In a chemical change, new products are formed. The new substances formed have
properties entirely different from the original substances.
Ca(OH) 2 + 2 HCl ? CaCl 2 + 2 H 2O
7. (a)
Burning of a magnesium ribbon is a chemical change. When magnesium ribbon is held
over the flame of a burner, it burns with a dazzling white light to give a new substance
called magnesium oxide.
2Mg + O 2 ? 2MgO
Magnesium Oxygen Magnesium oxide
CBSE VII | SCIENCE
Sample Paper – 2 Solution
8. (d)
Boiling of water, melting of ice and lightning of bulb is a physical change. No chemical
reaction takes place and no new products are formed. However, rusting of iron is a
chemical change. Iron article chemically reacts with air and moisture to form a flaky
reddish brown layer of hydrated iron (III) oxide, known as rust.
9. (d)
Sodium hydroxide base is used in the soap and detergent industry.
10. (d)
The filament of an electric bulb is made of a thin wire of tungsten.
11. (d)
Compact fluorescent lamps (CFLs) reduce wastage of electricity and can be fixed in
ordinary bulb holders.
12. (d)
A current carrying coil of an insulated wire wrapped around a piece of iron is called an
electromagnet.
13. (b)
A non-luminous object does not produce its own light, but reflects light from other
sources.
14. (b)
An image formed by a plane mirror is erect and of the same size as the object.
15. (a)
Absorber of radiant energy
SECTION B
16. Septic tanks are low cost onsite sewage disposal systems suitable for places where
there is no sewerage system. It can be used for hospitals, isolated buildings or a cluster
of 4 to 5 houses.
17.
(a) Mango, apple and orange. (Any two)
(b) Castor and balsam
CBSE VII | SCIENCE
Sample Paper – 2 Solution
18. Tooth decay can be prevented with the help of the following measures:
1. After every meal, one should rinse the mouth thoroughly with water.
2. One should brush the teeth twice a day.
3. Sugary food must be eaten in minimal quantities.
4. Dental floss must be used to keep the space between the teeth clean.
19.
i. Melting of ice: During this change, the water changes from its solid state to liquid
state and it can be solidified again. Hence, this is a reversible change.
ii. Lightening of an electric bulb: During this change, electricity is passed through the
filament which becomes white hot and glows, but when the switch is off, the
filament returns to its original shape and condition; hence, it is reversible.
20. Iron is coated with chromium to prevent rusting. It is called chrome-plating. Chromium
metal is resistant to the action of air and moisture. So, when a layer of chromium is
deposited on an iron object, the iron object is protected from rusting.
21. Light has a dual nature as it exhibits the properties of both, waves and particles
depending on the situation.
22. A spherical mirror is that mirror whose reflecting surface is a part of a hollow sphere of
glass. In a concave mirror, the reflecting surface is the bent-in surface.
SECTION C
23.
(a)
i. This is because the pulmonary artery carries blood away from the heart and not
towards it like a vein does.
ii. Since the blood flows through arteries rapidly at a high pressure, the arteries
have thick elastic walls.
iii. The red blood cells contain a red pigment called haemoglobin. The presence of
haemoglobin makes blood appear red.
(b) Platelets form a network of cells on the cut or wound and thus, form a blood clot.
24.
(a) The process of taking out silk fibres from the cocoon is called reeling. Cocoons are
collected first. These cocoons are then treated in hot water. Hot water makes the silk
fibres of the cocoons separate. The threads are then unwound to obtain the long silk
fibre.
Page 4
CBSE VII | SCIENCE
Sample Paper – 2 Solution
CBSE Board
Class VII Science
Sample Paper – 2 Solution
Term II
SECTION A
1. (d)
Sphygmomanometer is used to measure the blood pressure.
2. (b)
Seed formation takes place during sexual reproduction in plants. Cutting, grafting and
tissue culture are methods of propagating plants asexually.
3. (b)
Deforestation is the process of cutting more and more tress from the forests to
accommodate growing population and to provide space for industries.
4. (a)
Oxygen is a renewable resource because it is continuously supplied by plants during
photosynthesis.
5. (b)
In the method of galvanization, surface of iron is coated with a layer of more active
metal like zinc.
Zinc metal prevents the surface of iron from coming in the contact with air and
moisture and thus, protects it from rusting.
6. (a)
In a chemical change, new products are formed. The new substances formed have
properties entirely different from the original substances.
Ca(OH) 2 + 2 HCl ? CaCl 2 + 2 H 2O
7. (a)
Burning of a magnesium ribbon is a chemical change. When magnesium ribbon is held
over the flame of a burner, it burns with a dazzling white light to give a new substance
called magnesium oxide.
2Mg + O 2 ? 2MgO
Magnesium Oxygen Magnesium oxide
CBSE VII | SCIENCE
Sample Paper – 2 Solution
8. (d)
Boiling of water, melting of ice and lightning of bulb is a physical change. No chemical
reaction takes place and no new products are formed. However, rusting of iron is a
chemical change. Iron article chemically reacts with air and moisture to form a flaky
reddish brown layer of hydrated iron (III) oxide, known as rust.
9. (d)
Sodium hydroxide base is used in the soap and detergent industry.
10. (d)
The filament of an electric bulb is made of a thin wire of tungsten.
11. (d)
Compact fluorescent lamps (CFLs) reduce wastage of electricity and can be fixed in
ordinary bulb holders.
12. (d)
A current carrying coil of an insulated wire wrapped around a piece of iron is called an
electromagnet.
13. (b)
A non-luminous object does not produce its own light, but reflects light from other
sources.
14. (b)
An image formed by a plane mirror is erect and of the same size as the object.
15. (a)
Absorber of radiant energy
SECTION B
16. Septic tanks are low cost onsite sewage disposal systems suitable for places where
there is no sewerage system. It can be used for hospitals, isolated buildings or a cluster
of 4 to 5 houses.
17.
(a) Mango, apple and orange. (Any two)
(b) Castor and balsam
CBSE VII | SCIENCE
Sample Paper – 2 Solution
18. Tooth decay can be prevented with the help of the following measures:
1. After every meal, one should rinse the mouth thoroughly with water.
2. One should brush the teeth twice a day.
3. Sugary food must be eaten in minimal quantities.
4. Dental floss must be used to keep the space between the teeth clean.
19.
i. Melting of ice: During this change, the water changes from its solid state to liquid
state and it can be solidified again. Hence, this is a reversible change.
ii. Lightening of an electric bulb: During this change, electricity is passed through the
filament which becomes white hot and glows, but when the switch is off, the
filament returns to its original shape and condition; hence, it is reversible.
20. Iron is coated with chromium to prevent rusting. It is called chrome-plating. Chromium
metal is resistant to the action of air and moisture. So, when a layer of chromium is
deposited on an iron object, the iron object is protected from rusting.
21. Light has a dual nature as it exhibits the properties of both, waves and particles
depending on the situation.
22. A spherical mirror is that mirror whose reflecting surface is a part of a hollow sphere of
glass. In a concave mirror, the reflecting surface is the bent-in surface.
SECTION C
23.
(a)
i. This is because the pulmonary artery carries blood away from the heart and not
towards it like a vein does.
ii. Since the blood flows through arteries rapidly at a high pressure, the arteries
have thick elastic walls.
iii. The red blood cells contain a red pigment called haemoglobin. The presence of
haemoglobin makes blood appear red.
(b) Platelets form a network of cells on the cut or wound and thus, form a blood clot.
24.
(a) The process of taking out silk fibres from the cocoon is called reeling. Cocoons are
collected first. These cocoons are then treated in hot water. Hot water makes the silk
fibres of the cocoons separate. The threads are then unwound to obtain the long silk
fibre.
CBSE VII | SCIENCE
Sample Paper – 2 Solution
(b) The varieties of silk are tassar silk, mulberry silk, muga silk, kosa silk and eri silk.
Mulberry silk is most commonly used. Mulberry silk is soft, lustrous and elastic and
can be dyed with attractive colours.
25.
(Label any two parts)
26.
(a) An indicator is a dye that changes color when it is put into an acid or a base.
(b) Put one drop of each liquid on turmeric paper, turn by turn.
(i) The liquid which turns the yellow turmeric paper red will be sodium hydroxide
(base). The red turmeric paper formed here can now be used to test sulphuric
acid.
(ii) Put one drop each of the remaining two liquids on red turmeric paper. The liquid
which makes the red turmeric paper yellow again will be sulphuric acid (This is
because sulphuric acid cancels the effect of sodium hydroxide base on turmeric
paper).
(iii) The liquid which has no effect on the red turned turmeric paper will be salt
solution (because it is neutral).
Page 5
CBSE VII | SCIENCE
Sample Paper – 2 Solution
CBSE Board
Class VII Science
Sample Paper – 2 Solution
Term II
SECTION A
1. (d)
Sphygmomanometer is used to measure the blood pressure.
2. (b)
Seed formation takes place during sexual reproduction in plants. Cutting, grafting and
tissue culture are methods of propagating plants asexually.
3. (b)
Deforestation is the process of cutting more and more tress from the forests to
accommodate growing population and to provide space for industries.
4. (a)
Oxygen is a renewable resource because it is continuously supplied by plants during
photosynthesis.
5. (b)
In the method of galvanization, surface of iron is coated with a layer of more active
metal like zinc.
Zinc metal prevents the surface of iron from coming in the contact with air and
moisture and thus, protects it from rusting.
6. (a)
In a chemical change, new products are formed. The new substances formed have
properties entirely different from the original substances.
Ca(OH) 2 + 2 HCl ? CaCl 2 + 2 H 2O
7. (a)
Burning of a magnesium ribbon is a chemical change. When magnesium ribbon is held
over the flame of a burner, it burns with a dazzling white light to give a new substance
called magnesium oxide.
2Mg + O 2 ? 2MgO
Magnesium Oxygen Magnesium oxide
CBSE VII | SCIENCE
Sample Paper – 2 Solution
8. (d)
Boiling of water, melting of ice and lightning of bulb is a physical change. No chemical
reaction takes place and no new products are formed. However, rusting of iron is a
chemical change. Iron article chemically reacts with air and moisture to form a flaky
reddish brown layer of hydrated iron (III) oxide, known as rust.
9. (d)
Sodium hydroxide base is used in the soap and detergent industry.
10. (d)
The filament of an electric bulb is made of a thin wire of tungsten.
11. (d)
Compact fluorescent lamps (CFLs) reduce wastage of electricity and can be fixed in
ordinary bulb holders.
12. (d)
A current carrying coil of an insulated wire wrapped around a piece of iron is called an
electromagnet.
13. (b)
A non-luminous object does not produce its own light, but reflects light from other
sources.
14. (b)
An image formed by a plane mirror is erect and of the same size as the object.
15. (a)
Absorber of radiant energy
SECTION B
16. Septic tanks are low cost onsite sewage disposal systems suitable for places where
there is no sewerage system. It can be used for hospitals, isolated buildings or a cluster
of 4 to 5 houses.
17.
(a) Mango, apple and orange. (Any two)
(b) Castor and balsam
CBSE VII | SCIENCE
Sample Paper – 2 Solution
18. Tooth decay can be prevented with the help of the following measures:
1. After every meal, one should rinse the mouth thoroughly with water.
2. One should brush the teeth twice a day.
3. Sugary food must be eaten in minimal quantities.
4. Dental floss must be used to keep the space between the teeth clean.
19.
i. Melting of ice: During this change, the water changes from its solid state to liquid
state and it can be solidified again. Hence, this is a reversible change.
ii. Lightening of an electric bulb: During this change, electricity is passed through the
filament which becomes white hot and glows, but when the switch is off, the
filament returns to its original shape and condition; hence, it is reversible.
20. Iron is coated with chromium to prevent rusting. It is called chrome-plating. Chromium
metal is resistant to the action of air and moisture. So, when a layer of chromium is
deposited on an iron object, the iron object is protected from rusting.
21. Light has a dual nature as it exhibits the properties of both, waves and particles
depending on the situation.
22. A spherical mirror is that mirror whose reflecting surface is a part of a hollow sphere of
glass. In a concave mirror, the reflecting surface is the bent-in surface.
SECTION C
23.
(a)
i. This is because the pulmonary artery carries blood away from the heart and not
towards it like a vein does.
ii. Since the blood flows through arteries rapidly at a high pressure, the arteries
have thick elastic walls.
iii. The red blood cells contain a red pigment called haemoglobin. The presence of
haemoglobin makes blood appear red.
(b) Platelets form a network of cells on the cut or wound and thus, form a blood clot.
24.
(a) The process of taking out silk fibres from the cocoon is called reeling. Cocoons are
collected first. These cocoons are then treated in hot water. Hot water makes the silk
fibres of the cocoons separate. The threads are then unwound to obtain the long silk
fibre.
CBSE VII | SCIENCE
Sample Paper – 2 Solution
(b) The varieties of silk are tassar silk, mulberry silk, muga silk, kosa silk and eri silk.
Mulberry silk is most commonly used. Mulberry silk is soft, lustrous and elastic and
can be dyed with attractive colours.
25.
(Label any two parts)
26.
(a) An indicator is a dye that changes color when it is put into an acid or a base.
(b) Put one drop of each liquid on turmeric paper, turn by turn.
(i) The liquid which turns the yellow turmeric paper red will be sodium hydroxide
(base). The red turmeric paper formed here can now be used to test sulphuric
acid.
(ii) Put one drop each of the remaining two liquids on red turmeric paper. The liquid
which makes the red turmeric paper yellow again will be sulphuric acid (This is
because sulphuric acid cancels the effect of sodium hydroxide base on turmeric
paper).
(iii) The liquid which has no effect on the red turned turmeric paper will be salt
solution (because it is neutral).
CBSE VII | SCIENCE
Sample Paper – 2 Solution
27.
(a) When an iron object is exposed to air and moisture, a flaky reddish brown layer of
hydrated iron (III) oxide is formed on its surface. This substance is called as rust and
the process of its formation is called rusting.
This is the only change that effects iron articles and slowly destroys them. Since iron
is used in making bridges, ships, cars, truck and many other objects. Rusting
weakens the structures of iron objects and cuts short their life.
Following is the chemical equation to show the process of rusting of iron:
Fe + O 2 + H 2O ? Fe 2O 3
Iron Oxygen Water Rust
(From the Air) (Iron oxide)
(b) Rusting of iron is considered a chemical change because a new substance called iron
oxide is formed in this process.
28.
i. Lime water is calcium hydroxide solution.
ii. When the gas evolved is passed through lime water, it turns milky.
iii. The turning of lime water milky shows the presence of carbon dioxide because when
Carbon dioxide (CO 2) is passed through lime water, white solid substance called
calcium carbonate is formed which makes lime water milky.
iv.
CH 3COOH + NaHCO 3 ? CO 2 + CH 3COONa + H 2O
Acetic acid Sodium Carbon Sodium Water
hydrogen dioxide acetate
carbonate
(Vinegar) (Baking soda)
CO 2 + [Ca(OH) 2] ? CaCO 3 + H 2O
Carbon dioxide Lime water Calcium Carbonate Water
29. Cool air is denser so it moves down whereas warm air is lighter so rises up hence
convection currents are formed that helps in circulating the cold air and keeps the room
cool.
If the air cooler is not kept higher up, then the cool air will remain at the surface layer
and warm air will remain at the top, hence no circulation of air will take place and room
will remain warm.
Read More
|
111 videos|246 docs|28 tests
|
FAQs on Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 - Science Class 7
| 1. What is the CBSE Sample Question Paper for Class 7 Science Term II? |  |
Ans. The CBSE Sample Question Paper for Class 7 Science Term II is a set of practice questions designed by the Central Board of Secondary Education (CBSE) to help students prepare for their Science exam in the second term. It includes questions covering various topics taught in Class 7 Science.
| 2. How can the CBSE Sample Question Paper for Class 7 Science Term II help students? | |
Ans. The CBSE Sample Question Paper for Class 7 Science Term II can help students in multiple ways. It provides a clear understanding of the exam pattern, types of questions, and marking scheme. By solving these sample papers, students can assess their knowledge, identify their strengths and weaknesses, and work on improving their performance in the actual exam.
| 3. Are the questions in the CBSE Sample Question Paper for Class 7 Science Term II similar to the actual exam questions? | |
Ans. The questions in the CBSE Sample Question Paper for Class 7 Science Term II are designed to be similar to the actual exam questions. However, it is important to note that the actual exam may have different sets of questions. The sample paper serves as a guideline and helps students understand the format and difficulty level of the questions that may appear in the exam.
| 4. Can the CBSE Sample Question Paper for Class 7 Science Term II be used for self-study? | |
Ans. Yes, the CBSE Sample Question Paper for Class 7 Science Term II can be used for self-study. By solving these sample papers, students can gauge their understanding of the subject, practice time management, and improve their problem-solving skills. It is advisable to solve the sample papers under exam-like conditions to get a realistic experience.
| 5. Where can I find more CBSE Sample Question Papers for Class 7 Science Term II? | |
Ans. You can find more CBSE Sample Question Papers for Class 7 Science Term II on the official website of CBSE (cbse.nic.in). Additionally, various educational websites and bookstores also provide sample papers that can be helpful for exam preparation.
About this Document
|
4.68/5 Rating |
|
Nov 08, 2024 Last updated |
Document Description: Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 for Class 7 2024 is part of Science Class 7 preparation.
The notes and questions for Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 have been prepared according to the Class 7 exam syllabus. Information about Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 covers topics
like and Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Example, for Class 7 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2.
Introduction of Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 in English is available as part of our Science Class 7
for Class 7 & Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 in Hindi for Science Class 7 course.
Download more important topics related with notes, lectures and mock test series for Class 7
Exam by signing up for free. Class 7: Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7
Description
Full syllabus notes, lecture & questions for Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7 - Class 7 | Plus excerises question with solution to help you revise complete syllabus for Science Class 7 | Best notes, free PDF download
Information about Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2
In this doc you can find the meaning of Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 defined & explained in the simplest way possible. Besides explaining types of
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 theory, EduRev gives you an ample number of questions to practice Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 tests, examples and also practice Class 7
tests
|
Explore Courses for Class 7 exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7
,Previous Year Questions with Solutions
,Extra Questions
,Semester Notes
,Sample Paper
,Objective type Questions
,shortcuts and tricks
,Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7
,mock tests for examination
,Summary
,ppt
,study material
,practice quizzes
,Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 | Science Class 7
,past year papers
,MCQs
,Free
,Important questions
,Viva Questions
,Exam
,video lectures
;
Additional Information about Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 for Class 7 Preparation
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Free PDF Download
The Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 is an invaluable resource that delves deep into the core of the Class 7 exam.
These study notes are curated by experts and cover all the essential topics and concepts, making your preparation more efficient and effective.
With the help of these notes, you can grasp complex subjects quickly, revise important points easily,
and reinforce your understanding of key concepts. The study notes are presented in a concise and easy-to-understand manner,
allowing you to optimize your learning process. Whether you're looking for best-recommended books, sample papers, study material,
or toppers' notes, this PDF has got you covered. Download the Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 now and kickstart your journey towards success in the Class 7 exam.
Importance of Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2
The importance of Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 cannot be overstated, especially for Class 7 aspirants.
This document holds the key to success in the Class 7 exam.
It offers a detailed understanding of the concept, providing invaluable insights into the topic.
By knowing the concepts well in advance, students can plan their preparation effectively.
Utilize this indispensable guide for a well-rounded preparation and achieve your desired results.
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Notes
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Notes offer in-depth insights into the specific topic to help you master it with ease.
This comprehensive document covers all aspects related to Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2.
It includes detailed information about the exam syllabus, recommended books, and study materials for a well-rounded preparation.
Practice papers and question papers enable you to assess your progress effectively.
Additionally, the paper analysis provides valuable tips for tackling the exam strategically.
Access to Toppers' notes gives you an edge in understanding complex concepts.
Whether you're a beginner or aiming for advanced proficiency, Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Notes on EduRev are your ultimate resource for success.
Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Class 7 Questions
The "Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 Class 7 Questions" guide is a valuable resource for all aspiring students preparing for the
Class 7 exam. It focuses on providing a wide range of practice questions to help students gauge
their understanding of the exam topics. These questions cover the entire syllabus, ensuring comprehensive preparation.
The guide includes previous years' question papers for students to familiarize themselves with the exam's format and difficulty level.
Additionally, it offers subject-specific question banks, allowing students to focus on weak areas and improve their performance.
Study Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 on the App
Students of Class 7 can study Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of Class 7 Science: CBSE Sample Question Paper Solutions Term II – 2 is prepared as per the latest Class 7 syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup