Question Description
In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? for JEE 2024 is part of JEE preparation. The Question and answers have been prepared according to the JEE exam syllabus. Information about In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? covers all topics & solutions for JEE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer?.

Solutions for In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? in English & in Hindi are available as part of our courses for JEE. Download more important topics, notes, lectures and mock test series for JEE Exam by signing up for free.

Here you can find the meaning of In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer?, a detailed solution for In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? has been provided alongside types of In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice In a thin rectangular metallic strip a constant current I flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are l, w and d, respectively.A uniform magnetic field is applied on the strip along the positive y-direction. Due to this, the charge carriers experience anet deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRS and appearance of equal and opposite charges on the face opposite to PQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.Q.6.Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1 and w2 and thicknesses are d1 and d2 respectively. Two points K and M are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1 and V2 are the potential differences between K and M in strips 1 and 2, respectively. Then, for a given current I flowing through them in a given magnetic field strength B, the correct statement(s) is(are)a)If w1 = w2 and d1 = 2d2, then V2 = 2V1b)If w1 = w2 and d1 = 2d2, then V2 = V1c)If w1 = 2w2 and d1 = d2, then V2 = 2V1d)If w1 = 2w2 and d1 = d2, then V2 = V1Correct answer is option 'A,D'. Can you explain this answer? tests, examples and also practice JEE tests.