Mechanical Engineering Exam > Mechanical Engineering Questions > A machinist desires to turn a round steel sto...
Start Learning for Free
A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?
- a)Sintered carbides
- b)Ceramic
- c)HSS
- d)Diamond.
Correct answer is option 'B'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A machinist desires to turn a round steel stock of outside diameter 10...
Ans. (b) Cutting speed in this case is 314 m / min, at which ceramic is suited.
Most Upvoted Answer
A machinist desires to turn a round steel stock of outside diameter 10...
Answer:
To determine the suitable tool material for machining the round steel stock, we need to consider the cutting conditions and the material properties.
Cutting Conditions:
- Outside diameter of the round steel stock: 100 mm
- Rotational speed: 1000 rpm
- Depth of cut: 3 mm
- Feed rate: 0.3 mm/rev
Material Properties:
- Tensile strength: 75 kg/mm2
Tool Materials:
a) Sintered carbides
b) Ceramic
c) HSS (High-Speed Steel)
d) Diamond
Criteria for Suitable Tool Material:
The tool material should have high hardness and wear resistance to withstand the cutting forces and high temperatures generated during machining. It should also have sufficient toughness to withstand the impact and shock loads. Additionally, the tool material should have good thermal conductivity to dissipate the heat generated during machining.
Explanation:
- Sintered carbides: Sintered carbides are known for their high hardness and wear resistance, making them suitable for machining hard materials. However, they have poor toughness and may not withstand the impact loads encountered during machining the round steel stock.
- HSS: High-Speed Steel is a versatile tool material with good toughness and wear resistance. It is commonly used for machining a wide range of materials. However, for the given cutting conditions and the tensile strength of the round steel stock, HSS may not provide sufficient hardness and wear resistance.
- Diamond: Diamond is the hardest known material and has excellent wear resistance. However, machining with diamond tools requires high cutting speeds and low feed rates. The given cutting conditions do not match the requirements for diamond tooling.
- Ceramic: Ceramics have exceptional hardness, wear resistance, and high-temperature resistance. They can withstand high cutting speeds and provide excellent surface finish. Based on the given cutting conditions and the material properties, ceramic tooling is the most suitable option.
Therefore, the suitable tool material for machining the round steel stock under the specified cutting conditions is ceramic.
To determine the suitable tool material for machining the round steel stock, we need to consider the cutting conditions and the material properties.
Cutting Conditions:
- Outside diameter of the round steel stock: 100 mm
- Rotational speed: 1000 rpm
- Depth of cut: 3 mm
- Feed rate: 0.3 mm/rev
Material Properties:
- Tensile strength: 75 kg/mm2
Tool Materials:
a) Sintered carbides
b) Ceramic
c) HSS (High-Speed Steel)
d) Diamond
Criteria for Suitable Tool Material:
The tool material should have high hardness and wear resistance to withstand the cutting forces and high temperatures generated during machining. It should also have sufficient toughness to withstand the impact and shock loads. Additionally, the tool material should have good thermal conductivity to dissipate the heat generated during machining.
Explanation:
- Sintered carbides: Sintered carbides are known for their high hardness and wear resistance, making them suitable for machining hard materials. However, they have poor toughness and may not withstand the impact loads encountered during machining the round steel stock.
- HSS: High-Speed Steel is a versatile tool material with good toughness and wear resistance. It is commonly used for machining a wide range of materials. However, for the given cutting conditions and the tensile strength of the round steel stock, HSS may not provide sufficient hardness and wear resistance.
- Diamond: Diamond is the hardest known material and has excellent wear resistance. However, machining with diamond tools requires high cutting speeds and low feed rates. The given cutting conditions do not match the requirements for diamond tooling.
- Ceramic: Ceramics have exceptional hardness, wear resistance, and high-temperature resistance. They can withstand high cutting speeds and provide excellent surface finish. Based on the given cutting conditions and the material properties, ceramic tooling is the most suitable option.
Therefore, the suitable tool material for machining the round steel stock under the specified cutting conditions is ceramic.
Attention Mechanical Engineering Students!
To make sure you are not studying endlessly, EduRev has designed Mechanical Engineering study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Mechanical Engineering.
|
Explore Courses for Mechanical Engineering exam
|
|
Top Courses for Mechanical EngineeringView all
A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer?
Question Description
A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Question and answers have been prepared according to the Mechanical Engineering exam syllabus. Information about A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? covers all topics & solutions for Mechanical Engineering 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer?.
A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Question and answers have been prepared according to the Mechanical Engineering exam syllabus. Information about A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? covers all topics & solutions for Mechanical Engineering 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer?.
Solutions for A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? in English & in Hindi are available as part of our courses for Mechanical Engineering.
Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free.
Here you can find the meaning of A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer?, a detailed solution for A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? has been provided alongside types of A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A machinist desires to turn a round steel stock of outside diameter 100 mm at 1000rpm. The material has tensile strength of 75 kg/mm2. The depth of cut chosen is 3mm at a feed rate of 0.3 mm/rev. Which one of the following tool materials will be suitable for machining the component under the specified cutting conditions?a)Sintered carbidesb)Ceramicc)HSSd)Diamond.Correct answer is option 'B'. Can you explain this answer? tests, examples and also practice Mechanical Engineering tests.
|
|
Explore Courses for Mechanical Engineering exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup