Question Description
A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Question and answers have been prepared according to the Mechanical Engineering exam syllabus. Information about A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? covers all topics & solutions for Mechanical Engineering 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer?.

Solutions for A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? in English & in Hindi are available as part of our courses for Mechanical Engineering. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free.

Here you can find the meaning of A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer?, a detailed solution for A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? has been provided alongside types of A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice A pair of straight teeth spur gears with 6 mm module, having 20° involute full depth teeth is to transmit 12 kW at 300 rpm of the pinion. The speed ratio is 3:1. The allowable static stresses for gear of cast irion and pinion of steel are 60 MPa and 105 MPa respectively.Assume the following:Number of teeth on pinion = 16;Face width = 14 m;σes - 600 MPa; Ep = 200 GPa; EG = 100 GPa; Service factor, Cs = 1; sin20° = 0.342.Based on these design data, match the followings:a)ab)bc)cd)dCorrect answer is option 'B'. Can you explain this answer? tests, examples and also practice Mechanical Engineering tests.