Class 12 Exam  >  Class 12 Questions  >   Read the following text and answer the follo... Start Learning for Free
Read the following text and answer the following questions on the basis of the same:
Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.
In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.
  • a)
    Higher, lower
  • b)
    Lower, higher
  • c)
    Lower, lower
  • d)
    Higher, higher
Correct answer is option 'A'. Can you explain this answer?
Verified Answer
Read the following text and answer the following questions on the bas...
The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance.
View all questions of this test
Most Upvoted Answer
Read the following text and answer the following questions on the bas...
Carbon Composition Resistors
- In carbon composition resistors, the resistive element is made from a mixture of carbon dust or graphite and a non-conducting ceramic powder.
- The ratio of carbon dust to ceramic determines the resistive value of the resistor.
- When the ratio of carbon is higher, the overall resistance of the resistor is lower.

Explanation
- Carbon composition resistors are manufactured by combining carbon dust or graphite with a non-conducting ceramic powder.
- The ratio of carbon to ceramic in these resistors determines their resistive value.
- A higher ratio of carbon means that there is less ceramic material, resulting in lower overall resistance in the resistor.
- Therefore, in carbon composition resistors, the higher the ratio of carbon, the lower the overall resistance of the resistor.
Explore Courses for Class 12 exam
Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer?
Question Description
Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? for Class 12 2024 is part of Class 12 preparation. The Question and answers have been prepared according to the Class 12 exam syllabus. Information about Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Class 12 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer?.
Solutions for Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? in English & in Hindi are available as part of our courses for Class 12. Download more important topics, notes, lectures and mock test series for Class 12 Exam by signing up for free.
Here you can find the meaning of Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer?, a detailed solution for Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? has been provided alongside types of Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrome) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, ______ the ratio of carbon, _____ the overall resistance.a)Higher, lowerb)Lower, higherc)Lower, lowerd)Higher, higherCorrect answer is option 'A'. Can you explain this answer? tests, examples and also practice Class 12 tests.
Explore Courses for Class 12 exam
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev