Electrical Engineering (EE) Exam > Electrical Engineering (EE) Questions > A semiconductor switch is used to connect a l...
Start Learning for Free
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is?
Most Upvoted Answer
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 2...
Answer:
Semiconductor Switch
A semiconductor switch is a device that is used to connect or disconnect an electrical circuit. It is made up of semiconductor materials such as Silicon or Germanium. The main function of a semiconductor switch is to control the flow of current in a circuit.
Load Calculation
The load connected to the semiconductor switch is a 10ohm resistor and a 0.1H inductor. The load is connected to a 220V, 50Hz supply.
Worst Transient
The worst transient occurs when the triggering angle is at 0 degrees. This is because the voltage across the load is at its maximum at this angle. The maximum voltage across the load can cause a transient in the circuit.
Explanation
When the semiconductor switch is triggered at 0 degrees, the voltage across the load is at its maximum. The inductor in the load will resist the change in current and will cause a transient in the circuit. The transient can cause a voltage spike that can damage the semiconductor switch or other components in the circuit.
To avoid the transient, the triggering angle should be increased. This will reduce the voltage across the load and reduce the chance of a transient. The exact triggering angle will depend on the specific circuit and load requirements.
|
Explore Courses for Electrical Engineering (EE) exam
|
|
Similar Electrical Engineering (EE) Doubts
Top Courses for Electrical Engineering (EE)View all
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is?
Question Description
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? for Electrical Engineering (EE) 2025 is part of Electrical Engineering (EE) preparation. The Question and answers have been prepared according to the Electrical Engineering (EE) exam syllabus. Information about A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? covers all topics & solutions for Electrical Engineering (EE) 2025 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is?.
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? for Electrical Engineering (EE) 2025 is part of Electrical Engineering (EE) preparation. The Question and answers have been prepared according to the Electrical Engineering (EE) exam syllabus. Information about A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? covers all topics & solutions for Electrical Engineering (EE) 2025 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is?.
Solutions for A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? in English & in Hindi are available as part of our courses for Electrical Engineering (EE).
Download more important topics, notes, lectures and mock test series for Electrical Engineering (EE) Exam by signing up for free.
Here you can find the meaning of A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? defined & explained in the simplest way possible. Besides giving the explanation of
A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is?, a detailed solution for A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? has been provided alongside types of A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? theory, EduRev gives you an
ample number of questions to practice A semiconductor switch is used to connect a load of 10ohm, 0.1H to a 220V , 50Hz Supply. For the worst transient when the triggering angle is? tests, examples and also practice Electrical Engineering (EE) tests.
|
|
Explore Courses for Electrical Engineering (EE) exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup