KVL is applied in ____________a)Mesh analysisb)Nodal analysisc)Both mesh and nodald)Neither mesh nor nodalCorrect answer is option 'A'. Can you explain this answer?

Question

Answer

KVL is applied to mesh analysis, because mesh analysis is nothing but a loop analysis and KVL is suitable only for loop.( KVL - 'Kirchoff's voltage law' so loop analysis is only way of getting voltage , node analysis contain only current)

Answer

Mesh is a closed path in an electrical circuit that has no other internal closed paths..to solve this mesh we use kvl.we can't use kcl to solve a mesh

Answer

Introduction:
KVL (Kirchhoff's Voltage Law) is a fundamental concept in electrical circuit analysis. It is one of the two Kirchhoff's laws, the other being KCL (Kirchhoff's Current Law). KVL is used to analyze circuits by applying the principle of conservation of energy.

Kirchhoff's Voltage Law:
Kirchhoff's Voltage Law states that the sum of the voltage drops (or rises) around any closed loop in a circuit is equal to the sum of the voltage sources in that loop. In other words, the algebraic sum of the voltages in a closed loop is zero.

Mesh Analysis:
Mesh analysis is a technique used to solve electrical circuits by applying KVL. In mesh analysis, the circuit is divided into meshes or loops, and KVL is applied to each mesh. The currents flowing in each mesh are considered as loop currents, and the voltage drops across the elements in each mesh are expressed in terms of these loop currents.

By applying KVL to each mesh, a set of simultaneous equations is obtained, which can be solved to determine the unknown loop currents. Once the loop currents are known, other circuit parameters such as voltages and currents can be easily calculated.

Nodal Analysis:
Nodal analysis is another technique used to solve electrical circuits. In nodal analysis, the circuit is divided into nodes, and KCL (Kirchhoff's Current Law) is applied to each node. By applying KCL at each node, a set of simultaneous equations is obtained, which can be solved to determine the unknown node voltages.

However, KVL is not directly applied in nodal analysis. Instead, the voltages at the nodes are expressed in terms of the known voltages or reference node voltage. The unknown node voltages are then determined by solving the set of equations obtained from KCL.

Conclusion:
In summary, KVL is applied in mesh analysis, where the circuit is divided into meshes and KVL is applied to each mesh. Nodal analysis, on the other hand, uses KCL to solve circuits. Therefore, the correct answer is option 'A' - KVL is applied in mesh analysis.

Answer

A mesh analysis..

Answer

A

Top Courses for Electrical Engineering (EE)View all

Network Theory (Electric Circuits)

Short Notes for Electrical Engineering

Electrical Machines

Crash Course: Electrical Engineering (EE)

GATE Electrical Engineering (EE) Mock Test Series 2026

Top Courses for Electrical Engineering (EE)

Top Courses for Electrical Engineering (EE)

Related Content

Schools

Competitive Examinations

Quick Access Links

Technical Exams