Alternating - Current Circuits | Additional Documents & Tests for IIT JAM PDF Download

Certain circuits include sources of alternating electromotive forces of the sinusoidal form V = V₀ cos(ωt) or V = V₀ sin(ωt). The sine and cosine functions have values that vary between +1 and −1; either of the equations for the voltage represents a potential that varies with respect to time and has values from +V₀ to −V₀. The voltage varies with time at a rate given by the numerical value of ω; ω, which is called the angular frequency, is expressed in radians per second. Figure shows an example with V₀ = 170 volts and ω = 377 radians per second, so that V = 170 cos(377t). The time interval required for the pattern to be repeated is called the period T, given by T = 2π/ω. In Figure, the pattern is repeated every 16.7 milliseconds, which is the period. The frequency of the voltage is symbolized by f and given by f = 1/T. In terms of ω, f = ω/2π, in hertz.

Figure: A sinusoidal voltage (see text).

The root-mean-square (rms) voltage of a sinusoidal source of electromotive force (V_rms) is used to characterize the source. It is the square root of the time average of the voltage squared. The value of V_rms is V₀/Square root of√2, or, equivalently, 0.707V₀. Thus, the 60-hertz, 120-volt alternating current, which is available from most electric outlets in U.S. homes and which is illustrated in Figure, has V₀ = 120/0.707 = 170 volts. The potential difference at the outlet varies from +170 volts to −170 volts and back to +170 volts 60 times each second. The rms values of voltage and currentare especially useful in calculating average power in AC circuits.
A sinusoidal electromotive force can be generated using the principles described in Faraday’s law of electromagnetic induction (see\ electromagnetism: Faraday’s law of induction). Briefly, an alternating electromotive force can be induced in a loop of conducting wire by rotating the loop of wire in a uniform magnetic field.
In AC circuits, it is often necessary to find the currents as a function of time in the various parts of the circuit for a given source of sinusoidal electromotive force. While the problems can become quite complex, the solutions are based on Kirchhoff’s two laws discussed above (see Kirchhoff’s laws of electric circuits). The solution for the current in a given loop takes the form i = i₀ cos(ωt − ϕ). The current has the same frequency as the applied voltage but is not necessarily “in phase” with that voltage. When the phase angle ϕ does not equal zero, the maximum of the current does not occur when the driving voltage is at its maximum.