AutoCAD Floor Plan Tutorial for Beginners - 2 Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this floorplan tutorial you will now
place Windows so we already created a
wall layout so if someone have not seen
the previous tutorial so for them we
will create these two layers again door
and window layer so just delete this
layers so click on new layer give the
name window then give the color ok then
cancel this line wait to default
ok again new layer for door give the
color
okay then close this we want to create a
Windows so we will make window layer as
a current then so we want to create this
window W so size is 2 meter width so it
is place at the center so we will just
take a line come out from this midpoint
click on the midpoint to the midpoint
then press Enter
then we will offset it by 1 meter on
either side give the offset distance of
1 click the line give the side click
click the line give the side click enter
so we'll just erase this line for that
you we enter select the object press
ENTER then again take line command from
middle if midpoint is not shown
automatically then you have to click on
this object snap right click on it go to
setting and tick to midpoint option then
it will show automatically and click on
the midpoint and click here enter then
up set this by 0.05
select give the side against elite give
the other side enter then here is the
middle line enter so this window is
created so this window is created W the
same window is here
so we will just copy this window on this
side so we'll use copy click on the copy
select object so we will be using a
window selection just click outside in
empty space create a blue window by
clicking on left to right side
don't create green window otherwise it
will create walls also select walls also
so create a blue window then I enter
then give the base point so on this side
we can have the midpoint this midpoint
so we will give this side midpoint so we
have on that side also on this side also
so you have to give a base point that
will be available on the both the sides
so we will take this midpoint and we
will click on this midpoint press Enter
so same window is created so this is the
then next is this w 1 is one point for
you again it is at the mid so again we
will create it there again line
made a point mahir made a point is here
so we'll just track it and come back
then enter again upset upset by point 75
which is a 1.5 meter with so select give
the side say let give the side enter it
is the middle line enter take the line
command click the two points again
offset by 0.05 enter one either say
enter the near is the middle so this
window again the same window is here and
here so we just have to rotate it and
make it vertical
so we'll just copy it copy select object
enter give this point anywhere I give
the second point press escape to come
out then rotate this window using rotate
come back so rotate select object enter
give the base point give the vertical
Direction and click then move it so
again move select object enter now the
base point is very important so we want
the
made on this side actually so the
midpoint should be this one so we'll
just take our point cursor force holds
on for some time there and come back and
again take your cursor to this endpoint
don't click just hold there and come
down now we want this point actually
then make the earth off and click here
then copy this window on this side copy
select object enter then this midpoint
to this work enter to come out so in
this way all the windows are created