JEE Exam  >  JEE Notes  >  DC Pandey Solutions for JEE Physics  >  DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1

DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1 | DC Pandey Solutions for JEE Physics PDF Download

Download, print and study this document offline
Please wait while the PDF view is loading
 Page 1


For JEE Advanced 
  Objective Questions 
  Single Correct Option 
Q 1.  Two ends of an inductor of inductance L are connected to two parallel conducting wires. A rod of 
length l and mass m is given velocity v
0
 as shown. The whole system is placed in perpendicular 
magnetic field B. Find the maximum current in the inductor, (neglect gravity and friction) 
 
 (a) 
0
mv
L
   (b) 
0
m
v
L
   (c) 
2
0
mv
L
   (d) None of these 
Q 2.  A conducting rod is moving with a constant velocity v over the parallel conducting rails which are 
connected at the ends through a resistor R and capacitor C as shown in the figure. Magnetic field 
B is into the plane. Consider the following statements 
 
(i) Current in loop AEFBA is anticlockwise (ii) Current in loop AEFBA is clockwise (iii) Current 
through the capacitor is zero (iv) Energy stored in the capacitor is 
2 2 2
1
CB L v
2
 
  Which of the following options is correct? 
  (a) Statements (i) and (iii) are correct  (b) Statements (ii) and (iv) are correct   
  (c) Statements (i), (iii) and (iv) are correct  (d) None of these 
Q 3.  A rod is rotating with a constant angular velocity ? about point O (its centre) in a magnetic field B 
as shown. Which of the following figure correctly shows the distribution of charge inside the rod? 
 
  (a)    (b)    (c)    (d) 
Q 4.  A straight conducting rod PQ is executing SHM in xy plane from x = - d to x = + d. Its mean 
position is x = 0 and its length is along y-axis. There exists a uniform magnetic field B from x = - 
Page 2


For JEE Advanced 
  Objective Questions 
  Single Correct Option 
Q 1.  Two ends of an inductor of inductance L are connected to two parallel conducting wires. A rod of 
length l and mass m is given velocity v
0
 as shown. The whole system is placed in perpendicular 
magnetic field B. Find the maximum current in the inductor, (neglect gravity and friction) 
 
 (a) 
0
mv
L
   (b) 
0
m
v
L
   (c) 
2
0
mv
L
   (d) None of these 
Q 2.  A conducting rod is moving with a constant velocity v over the parallel conducting rails which are 
connected at the ends through a resistor R and capacitor C as shown in the figure. Magnetic field 
B is into the plane. Consider the following statements 
 
(i) Current in loop AEFBA is anticlockwise (ii) Current in loop AEFBA is clockwise (iii) Current 
through the capacitor is zero (iv) Energy stored in the capacitor is 
2 2 2
1
CB L v
2
 
  Which of the following options is correct? 
  (a) Statements (i) and (iii) are correct  (b) Statements (ii) and (iv) are correct   
  (c) Statements (i), (iii) and (iv) are correct  (d) None of these 
Q 3.  A rod is rotating with a constant angular velocity ? about point O (its centre) in a magnetic field B 
as shown. Which of the following figure correctly shows the distribution of charge inside the rod? 
 
  (a)    (b)    (c)    (d) 
Q 4.  A straight conducting rod PQ is executing SHM in xy plane from x = - d to x = + d. Its mean 
position is x = 0 and its length is along y-axis. There exists a uniform magnetic field B from x = - 
d to x = 0 pointing inward normal to the paper and from x = 0 to = + d there exists another 
uniform magnetic field of same magnitude B but pointing outward normal to the plane of the 
paper. At the instant t = 0, the rod is at x ~ 0 and moving to the right. The induced emf ( ?)
 
across 
the rod PQ vs time (t) graph will be 
 
  (a)      (b) 
  (c)      (d) 
Q 5.  Two parallel long straight conductors lie on a smooth plane surface. Two other parallel conductors 
rest on them at right angles so as to form a square of side a. A uniform magnetic field B exists at 
right angles to the plane containing the conductors. Now conductors start moving outward with a 
constant velocity v
0 
at t = 0. Then induced current in the loop at any time t is ( ? is resistance per 
unit length of the conductors) 
 
 (a) 
0
0
aBv
(a v t) ??
   (b) 
0
aBv
2 ?
   (c) 
0
Bv
?
   (d) 
0
Bv
2 ?
 
Q 6.  A conducting square loop is placed in a magnetic field B with its plane perpendicular to the field. 
Some how the sides of the loop start shrinking at a constant rate ?. The induced emf in the loop at 
an instant when
 
its side is a, is 
 (a) 2a ?B  (b) a
2
?B  (c) 2a
2
?B  (d) a ?B 
Q 7.  A conducting straight wire PQ of length l is fixed along a diameter of a non-conducting ring as 
shown in, the figure. The ring is given a pure rolling motion on a horizontal surface such that its 
centre of mass has a velocity v. There exists a uniform horizontal magnetic field B in horizontal 
direction perpendicular to the plane of ring. The magnitude of induced emf in the wire PQ at the 
position shown in the figure will be 
Page 3


For JEE Advanced 
  Objective Questions 
  Single Correct Option 
Q 1.  Two ends of an inductor of inductance L are connected to two parallel conducting wires. A rod of 
length l and mass m is given velocity v
0
 as shown. The whole system is placed in perpendicular 
magnetic field B. Find the maximum current in the inductor, (neglect gravity and friction) 
 
 (a) 
0
mv
L
   (b) 
0
m
v
L
   (c) 
2
0
mv
L
   (d) None of these 
Q 2.  A conducting rod is moving with a constant velocity v over the parallel conducting rails which are 
connected at the ends through a resistor R and capacitor C as shown in the figure. Magnetic field 
B is into the plane. Consider the following statements 
 
(i) Current in loop AEFBA is anticlockwise (ii) Current in loop AEFBA is clockwise (iii) Current 
through the capacitor is zero (iv) Energy stored in the capacitor is 
2 2 2
1
CB L v
2
 
  Which of the following options is correct? 
  (a) Statements (i) and (iii) are correct  (b) Statements (ii) and (iv) are correct   
  (c) Statements (i), (iii) and (iv) are correct  (d) None of these 
Q 3.  A rod is rotating with a constant angular velocity ? about point O (its centre) in a magnetic field B 
as shown. Which of the following figure correctly shows the distribution of charge inside the rod? 
 
  (a)    (b)    (c)    (d) 
Q 4.  A straight conducting rod PQ is executing SHM in xy plane from x = - d to x = + d. Its mean 
position is x = 0 and its length is along y-axis. There exists a uniform magnetic field B from x = - 
d to x = 0 pointing inward normal to the paper and from x = 0 to = + d there exists another 
uniform magnetic field of same magnitude B but pointing outward normal to the plane of the 
paper. At the instant t = 0, the rod is at x ~ 0 and moving to the right. The induced emf ( ?)
 
across 
the rod PQ vs time (t) graph will be 
 
  (a)      (b) 
  (c)      (d) 
Q 5.  Two parallel long straight conductors lie on a smooth plane surface. Two other parallel conductors 
rest on them at right angles so as to form a square of side a. A uniform magnetic field B exists at 
right angles to the plane containing the conductors. Now conductors start moving outward with a 
constant velocity v
0 
at t = 0. Then induced current in the loop at any time t is ( ? is resistance per 
unit length of the conductors) 
 
 (a) 
0
0
aBv
(a v t) ??
   (b) 
0
aBv
2 ?
   (c) 
0
Bv
?
   (d) 
0
Bv
2 ?
 
Q 6.  A conducting square loop is placed in a magnetic field B with its plane perpendicular to the field. 
Some how the sides of the loop start shrinking at a constant rate ?. The induced emf in the loop at 
an instant when
 
its side is a, is 
 (a) 2a ?B  (b) a
2
?B  (c) 2a
2
?B  (d) a ?B 
Q 7.  A conducting straight wire PQ of length l is fixed along a diameter of a non-conducting ring as 
shown in, the figure. The ring is given a pure rolling motion on a horizontal surface such that its 
centre of mass has a velocity v. There exists a uniform horizontal magnetic field B in horizontal 
direction perpendicular to the plane of ring. The magnitude of induced emf in the wire PQ at the 
position shown in the figure will be 
 
  (a) Bvl   (b) 2Bvl   (c) 3Bvl/2   (d) zero 
Q 8.  A conducting rod of length L = 0.1 m is moving with a uniform speed v = 0.2 m/s on conducting 
rails in a magnetic field B = 0.5 T as shown. On one side, the end of the rails is connected to a 
capacitor of capacitance C = 20 ?F. Then the charges on the capacitor plates are 
 
  (a) q
A
 = 0 = q
B     
(b) q
A
 = + 20 ?C and q
B
 =-20 ?C 
  (c) q
A
 = + 0.2 ?C and q
B
 = -0.2 ?C  (d) q
A
 =-0.2 ?C and q
B
 = -0.2 ?C 
Q 9.  A wire is bent in the form of a V shape and placed in a horizontal plane. There exists a uniform 
magnetic field B perpendicular to the plane of the wire. A uniform conducting rod starts sliding 
over the V shaped wire with a constant speed v as shown in the figure. If the wire has no 
resistance, the current in rod will 
 
  (a) increase with time     (b) decrease with time 
  (c) remain constant     (d) always be zero 
Q 10.  A square loop of side b is rotated in a constant magnetic field B at angular frequency ? as
 
shown 
in the figure. What is the emf induced in it? 
 
 (a) b
2
B ? sin ?t (b) bB ?sin
2
 ?t (c) bB
2
? cos ?t (d) b
2
 B ? 
Q 11.  A uniform but time varying magnetic field exists in a cylindrical region as shown in the figure. 
The direction of magnetic field is into the plane of the paper and its magnitude is decreasing at a 
constant rate of 2 × 10
-3
 T/s. A particle of charge 1 ?C
 
is moved slowly along a circle of radius 1 m 
by an external force as shown in figure. The plane of the circle lies in the plane of the paper and it 
is concentric with the
 
cylindrical region. The work done by the external force in moving this 
charge along the circle will be 
 
Page 4


For JEE Advanced 
  Objective Questions 
  Single Correct Option 
Q 1.  Two ends of an inductor of inductance L are connected to two parallel conducting wires. A rod of 
length l and mass m is given velocity v
0
 as shown. The whole system is placed in perpendicular 
magnetic field B. Find the maximum current in the inductor, (neglect gravity and friction) 
 
 (a) 
0
mv
L
   (b) 
0
m
v
L
   (c) 
2
0
mv
L
   (d) None of these 
Q 2.  A conducting rod is moving with a constant velocity v over the parallel conducting rails which are 
connected at the ends through a resistor R and capacitor C as shown in the figure. Magnetic field 
B is into the plane. Consider the following statements 
 
(i) Current in loop AEFBA is anticlockwise (ii) Current in loop AEFBA is clockwise (iii) Current 
through the capacitor is zero (iv) Energy stored in the capacitor is 
2 2 2
1
CB L v
2
 
  Which of the following options is correct? 
  (a) Statements (i) and (iii) are correct  (b) Statements (ii) and (iv) are correct   
  (c) Statements (i), (iii) and (iv) are correct  (d) None of these 
Q 3.  A rod is rotating with a constant angular velocity ? about point O (its centre) in a magnetic field B 
as shown. Which of the following figure correctly shows the distribution of charge inside the rod? 
 
  (a)    (b)    (c)    (d) 
Q 4.  A straight conducting rod PQ is executing SHM in xy plane from x = - d to x = + d. Its mean 
position is x = 0 and its length is along y-axis. There exists a uniform magnetic field B from x = - 
d to x = 0 pointing inward normal to the paper and from x = 0 to = + d there exists another 
uniform magnetic field of same magnitude B but pointing outward normal to the plane of the 
paper. At the instant t = 0, the rod is at x ~ 0 and moving to the right. The induced emf ( ?)
 
across 
the rod PQ vs time (t) graph will be 
 
  (a)      (b) 
  (c)      (d) 
Q 5.  Two parallel long straight conductors lie on a smooth plane surface. Two other parallel conductors 
rest on them at right angles so as to form a square of side a. A uniform magnetic field B exists at 
right angles to the plane containing the conductors. Now conductors start moving outward with a 
constant velocity v
0 
at t = 0. Then induced current in the loop at any time t is ( ? is resistance per 
unit length of the conductors) 
 
 (a) 
0
0
aBv
(a v t) ??
   (b) 
0
aBv
2 ?
   (c) 
0
Bv
?
   (d) 
0
Bv
2 ?
 
Q 6.  A conducting square loop is placed in a magnetic field B with its plane perpendicular to the field. 
Some how the sides of the loop start shrinking at a constant rate ?. The induced emf in the loop at 
an instant when
 
its side is a, is 
 (a) 2a ?B  (b) a
2
?B  (c) 2a
2
?B  (d) a ?B 
Q 7.  A conducting straight wire PQ of length l is fixed along a diameter of a non-conducting ring as 
shown in, the figure. The ring is given a pure rolling motion on a horizontal surface such that its 
centre of mass has a velocity v. There exists a uniform horizontal magnetic field B in horizontal 
direction perpendicular to the plane of ring. The magnitude of induced emf in the wire PQ at the 
position shown in the figure will be 
 
  (a) Bvl   (b) 2Bvl   (c) 3Bvl/2   (d) zero 
Q 8.  A conducting rod of length L = 0.1 m is moving with a uniform speed v = 0.2 m/s on conducting 
rails in a magnetic field B = 0.5 T as shown. On one side, the end of the rails is connected to a 
capacitor of capacitance C = 20 ?F. Then the charges on the capacitor plates are 
 
  (a) q
A
 = 0 = q
B     
(b) q
A
 = + 20 ?C and q
B
 =-20 ?C 
  (c) q
A
 = + 0.2 ?C and q
B
 = -0.2 ?C  (d) q
A
 =-0.2 ?C and q
B
 = -0.2 ?C 
Q 9.  A wire is bent in the form of a V shape and placed in a horizontal plane. There exists a uniform 
magnetic field B perpendicular to the plane of the wire. A uniform conducting rod starts sliding 
over the V shaped wire with a constant speed v as shown in the figure. If the wire has no 
resistance, the current in rod will 
 
  (a) increase with time     (b) decrease with time 
  (c) remain constant     (d) always be zero 
Q 10.  A square loop of side b is rotated in a constant magnetic field B at angular frequency ? as
 
shown 
in the figure. What is the emf induced in it? 
 
 (a) b
2
B ? sin ?t (b) bB ?sin
2
 ?t (c) bB
2
? cos ?t (d) b
2
 B ? 
Q 11.  A uniform but time varying magnetic field exists in a cylindrical region as shown in the figure. 
The direction of magnetic field is into the plane of the paper and its magnitude is decreasing at a 
constant rate of 2 × 10
-3
 T/s. A particle of charge 1 ?C
 
is moved slowly along a circle of radius 1 m 
by an external force as shown in figure. The plane of the circle lies in the plane of the paper and it 
is concentric with the
 
cylindrical region. The work done by the external force in moving this 
charge along the circle will be 
 
 (a) zero  (b) 2 ? × 10
-9
 J  (c) ? × 10
-9
 J  (d) 4 ? × 10
-6
 J 
Q 12.  Switch S is closed at t = 0, in the circuit shown. The change in flux in the inductor (L = 500 mH) 
from t = 0 to an instant when it reaches steady state is 
 
  (a) 2Wb   (b) 1.5 Wb   (c) 0 Wb  (d) None of the above 
Q 13.  An L-R circuit is connected to a battery at time t = 0. The energy stored in the inductor reaches 
half its maximum value at time 
 (a) 
R2
ln
L 21
??
??
?
??
  (b) 
L 2 1
ln
R 2
??
?
??
??
  (c) 
L2
ln
R 21
??
??
?
??
  (d) 
R 2 1
ln
L 2
??
?
??
??
 
Q 14.  Electric charge q is distributed uniformly over a rod of length l. The rod is placed parallel to a long 
wire carrying a current i. The separation between the rod and the wire is a. The force needed to 
move the rod along its length with a uniform velocity v is 
 (a) 
0
iqv
2a
?
?
   (b) 
0
iqv
4a
?
?
   (c) 
0
iqvl
2a
?
?
   (d) 
0
iqvl
4a
?
?
  
Q 15.  AB is an infinitely long wire placed in the plane of rectangular coil of dimensions as
 
shown in the 
figure. Calculate the mutual inductance of wire AB and coil PQRS 
 
 (a) 
0
b a
ln
2b
?
?
   (b) 
0
c b
ln
2a
?
?
   (c) 
0
2
abc
2 (b a)
?
??
  (d) None of these 
Q 16.  PQ is an infinite current carrying conductor. AB and CD are smooth conducting rods on which a 
conductor EF moves with constant velocity v as shown. The force needed
 
to maintain constant 
speed of EF is 
 
 (a) 
2
0
Iv 1 (b)
ln
vR 2 (a)
?? ?
??
?
??
  (b) 
2
0
Iv v (a)
ln
R 2 (b)
?? ?
??
?
??
  (c) 
2
0
Iv v (b)
ln
R 2 (a)
?? ?
??
?
??
 (d) None of these 
Page 5


For JEE Advanced 
  Objective Questions 
  Single Correct Option 
Q 1.  Two ends of an inductor of inductance L are connected to two parallel conducting wires. A rod of 
length l and mass m is given velocity v
0
 as shown. The whole system is placed in perpendicular 
magnetic field B. Find the maximum current in the inductor, (neglect gravity and friction) 
 
 (a) 
0
mv
L
   (b) 
0
m
v
L
   (c) 
2
0
mv
L
   (d) None of these 
Q 2.  A conducting rod is moving with a constant velocity v over the parallel conducting rails which are 
connected at the ends through a resistor R and capacitor C as shown in the figure. Magnetic field 
B is into the plane. Consider the following statements 
 
(i) Current in loop AEFBA is anticlockwise (ii) Current in loop AEFBA is clockwise (iii) Current 
through the capacitor is zero (iv) Energy stored in the capacitor is 
2 2 2
1
CB L v
2
 
  Which of the following options is correct? 
  (a) Statements (i) and (iii) are correct  (b) Statements (ii) and (iv) are correct   
  (c) Statements (i), (iii) and (iv) are correct  (d) None of these 
Q 3.  A rod is rotating with a constant angular velocity ? about point O (its centre) in a magnetic field B 
as shown. Which of the following figure correctly shows the distribution of charge inside the rod? 
 
  (a)    (b)    (c)    (d) 
Q 4.  A straight conducting rod PQ is executing SHM in xy plane from x = - d to x = + d. Its mean 
position is x = 0 and its length is along y-axis. There exists a uniform magnetic field B from x = - 
d to x = 0 pointing inward normal to the paper and from x = 0 to = + d there exists another 
uniform magnetic field of same magnitude B but pointing outward normal to the plane of the 
paper. At the instant t = 0, the rod is at x ~ 0 and moving to the right. The induced emf ( ?)
 
across 
the rod PQ vs time (t) graph will be 
 
  (a)      (b) 
  (c)      (d) 
Q 5.  Two parallel long straight conductors lie on a smooth plane surface. Two other parallel conductors 
rest on them at right angles so as to form a square of side a. A uniform magnetic field B exists at 
right angles to the plane containing the conductors. Now conductors start moving outward with a 
constant velocity v
0 
at t = 0. Then induced current in the loop at any time t is ( ? is resistance per 
unit length of the conductors) 
 
 (a) 
0
0
aBv
(a v t) ??
   (b) 
0
aBv
2 ?
   (c) 
0
Bv
?
   (d) 
0
Bv
2 ?
 
Q 6.  A conducting square loop is placed in a magnetic field B with its plane perpendicular to the field. 
Some how the sides of the loop start shrinking at a constant rate ?. The induced emf in the loop at 
an instant when
 
its side is a, is 
 (a) 2a ?B  (b) a
2
?B  (c) 2a
2
?B  (d) a ?B 
Q 7.  A conducting straight wire PQ of length l is fixed along a diameter of a non-conducting ring as 
shown in, the figure. The ring is given a pure rolling motion on a horizontal surface such that its 
centre of mass has a velocity v. There exists a uniform horizontal magnetic field B in horizontal 
direction perpendicular to the plane of ring. The magnitude of induced emf in the wire PQ at the 
position shown in the figure will be 
 
  (a) Bvl   (b) 2Bvl   (c) 3Bvl/2   (d) zero 
Q 8.  A conducting rod of length L = 0.1 m is moving with a uniform speed v = 0.2 m/s on conducting 
rails in a magnetic field B = 0.5 T as shown. On one side, the end of the rails is connected to a 
capacitor of capacitance C = 20 ?F. Then the charges on the capacitor plates are 
 
  (a) q
A
 = 0 = q
B     
(b) q
A
 = + 20 ?C and q
B
 =-20 ?C 
  (c) q
A
 = + 0.2 ?C and q
B
 = -0.2 ?C  (d) q
A
 =-0.2 ?C and q
B
 = -0.2 ?C 
Q 9.  A wire is bent in the form of a V shape and placed in a horizontal plane. There exists a uniform 
magnetic field B perpendicular to the plane of the wire. A uniform conducting rod starts sliding 
over the V shaped wire with a constant speed v as shown in the figure. If the wire has no 
resistance, the current in rod will 
 
  (a) increase with time     (b) decrease with time 
  (c) remain constant     (d) always be zero 
Q 10.  A square loop of side b is rotated in a constant magnetic field B at angular frequency ? as
 
shown 
in the figure. What is the emf induced in it? 
 
 (a) b
2
B ? sin ?t (b) bB ?sin
2
 ?t (c) bB
2
? cos ?t (d) b
2
 B ? 
Q 11.  A uniform but time varying magnetic field exists in a cylindrical region as shown in the figure. 
The direction of magnetic field is into the plane of the paper and its magnitude is decreasing at a 
constant rate of 2 × 10
-3
 T/s. A particle of charge 1 ?C
 
is moved slowly along a circle of radius 1 m 
by an external force as shown in figure. The plane of the circle lies in the plane of the paper and it 
is concentric with the
 
cylindrical region. The work done by the external force in moving this 
charge along the circle will be 
 
 (a) zero  (b) 2 ? × 10
-9
 J  (c) ? × 10
-9
 J  (d) 4 ? × 10
-6
 J 
Q 12.  Switch S is closed at t = 0, in the circuit shown. The change in flux in the inductor (L = 500 mH) 
from t = 0 to an instant when it reaches steady state is 
 
  (a) 2Wb   (b) 1.5 Wb   (c) 0 Wb  (d) None of the above 
Q 13.  An L-R circuit is connected to a battery at time t = 0. The energy stored in the inductor reaches 
half its maximum value at time 
 (a) 
R2
ln
L 21
??
??
?
??
  (b) 
L 2 1
ln
R 2
??
?
??
??
  (c) 
L2
ln
R 21
??
??
?
??
  (d) 
R 2 1
ln
L 2
??
?
??
??
 
Q 14.  Electric charge q is distributed uniformly over a rod of length l. The rod is placed parallel to a long 
wire carrying a current i. The separation between the rod and the wire is a. The force needed to 
move the rod along its length with a uniform velocity v is 
 (a) 
0
iqv
2a
?
?
   (b) 
0
iqv
4a
?
?
   (c) 
0
iqvl
2a
?
?
   (d) 
0
iqvl
4a
?
?
  
Q 15.  AB is an infinitely long wire placed in the plane of rectangular coil of dimensions as
 
shown in the 
figure. Calculate the mutual inductance of wire AB and coil PQRS 
 
 (a) 
0
b a
ln
2b
?
?
   (b) 
0
c b
ln
2a
?
?
   (c) 
0
2
abc
2 (b a)
?
??
  (d) None of these 
Q 16.  PQ is an infinite current carrying conductor. AB and CD are smooth conducting rods on which a 
conductor EF moves with constant velocity v as shown. The force needed
 
to maintain constant 
speed of EF is 
 
 (a) 
2
0
Iv 1 (b)
ln
vR 2 (a)
?? ?
??
?
??
  (b) 
2
0
Iv v (a)
ln
R 2 (b)
?? ?
??
?
??
  (c) 
2
0
Iv v (b)
ln
R 2 (a)
?? ?
??
?
??
 (d) None of these 
Q 17.  The figure shows a circular region of radius R occupied by a time varying magnetic field  B(t)
?
such that 
dB
0
dt
? .
 
The magnitude of induced electric field at the point P at a distance r < R is 
 
  (a) decreasing with r     (b) increasing with r 
  (c) not varying with r     (d) varying as r
-2
 
Q 18.  Two circular loops P and Q are concentric and coplanar as shown in figure. The loop Q is smaller 
than P. If the current I, flowing in loop P is decreasing with time, then the current I
2
 in the loop Q 
 
  (a) flows in the same direction as that of P  (b) flows in the opposite direction as that of Q 
  (c) is zero      (d) None of these 
Q 19.  In the circuit shown in figure the switch S is closed at t = 0. If V
L
 is the voltage induced across the 
inductor and i is the instantaneous current, the correct variation of V
L
 versus i is given by 
 
  (a)  (b) (c) (d)   
Q 20.  In the figure shown, a uniform magnetic field | B
?
| = 0.5T is perpendicular to the plane of circuit. 
The sliding rod of length l = 0.25 m moves uniformly with constant speed v = 4ms
-1
. If the 
resistance of the slides is 2 ?, then the current flowing through the sliding rod is 
 
  (a) 0.1 A   (b) 0.17 A   (c) 0.08 A   (d) 0.03 A 
Q 21.  The figure shows a non-conducting ring of radius R carrying a charge q. In a circular region of 
radius r, a uniform magnetic field B
?
 perpendicular to the plane of
 
the ring varies at a constant rate 
dB
dt
?? .
 
The torque acting on the ring is 
Read More
209 docs

Top Courses for JEE

FAQs on DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1 - DC Pandey Solutions for JEE Physics

1. What is electromagnetic induction?
Ans. Electromagnetic induction is the phenomenon of generating an electromotive force (emf) or voltage in a conductor when it is exposed to a changing magnetic field. It is based on Faraday's law of electromagnetic induction and is the fundamental principle behind the working of devices such as generators and transformers.
2. How does electromagnetic induction work?
Ans. Electromagnetic induction works on the principle that a changing magnetic field induces an emf or voltage in a conductor. When a conductor is moved in a magnetic field or when the magnetic field around a conductor changes, the flux linking the conductor changes. This change in flux creates an induced emf according to Faraday's law, which in turn generates an electric current in the conductor if there is a complete circuit.
3. What is Faraday's law of electromagnetic induction?
Ans. Faraday's law of electromagnetic induction states that the magnitude of the induced emf in a circuit is directly proportional to the rate of change of magnetic flux through the circuit. It can be mathematically expressed as: emf = -N(dΦ/dt) where emf is the induced electromotive force, N is the number of turns in the circuit, and (dΦ/dt) is the rate of change of magnetic flux.
4. What are the applications of electromagnetic induction?
Ans. Electromagnetic induction has various applications in everyday life and technology. Some of the common applications include: - Generators: Electromagnetic induction is used in generators to convert mechanical energy into electrical energy. - Transformers: Transformers use electromagnetic induction to change the voltage levels in AC power transmission. - Induction cooktops: Induction cooktops use electromagnetic induction to generate heat in the cooking vessel. - Magnetic levitation trains: Maglev trains use electromagnetic induction to levitate and propel the train. - Wireless charging: Electromagnetic induction is used in wireless charging technology to transfer energy without physical contact.
5. What is Lenz's law in electromagnetic induction?
Ans. Lenz's law is a consequence of Faraday's law of electromagnetic induction. It states that the direction of the induced current in a circuit will be such that it opposes the change that produced it. In other words, the induced current creates a magnetic field that opposes the change in the magnetic field that caused the induction. Lenz's law is based on the principle of conservation of energy.
209 docs
Download as PDF
Explore Courses for JEE exam

Top Courses for JEE

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Semester Notes

,

DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1 | DC Pandey Solutions for JEE Physics

,

study material

,

video lectures

,

pdf

,

ppt

,

Extra Questions

,

Exam

,

Sample Paper

,

Free

,

DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1 | DC Pandey Solutions for JEE Physics

,

DC Pandey Solutions (JEE Advance): Electromagnetic Induction- 1 | DC Pandey Solutions for JEE Physics

,

Previous Year Questions with Solutions

,

practice quizzes

,

shortcuts and tricks

,

Summary

,

MCQs

,

mock tests for examination

,

past year papers

,

Important questions

,

Viva Questions

,

Objective type Questions

;