IIT-JEE 2013 Paper Advanced-2 (solved) Class 12 Notes | EduRev

Class 12 : IIT-JEE 2013 Paper Advanced-2 (solved) Class 12 Notes | EduRev

 Page 1


FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
 
Note: For the benefit of the students, specially the aspiring ones, the question of JEE(advanced), 2013 are also given in this 
booklet. Keeping the interest of students studying in class XI, the questions based on topics from class XI have been 
marked with ‘*’, which can be attempted as a test. For this test the time allocated in Physics, Chemistry & 
Mathematics and Physics are  22 minutes, 21 minutes and 25 minutes respectively. 
  
FIITJEE SOLUTIONS TO JEE(ADVANCED)-2013 
     
CODE  
PAPER 2 
Time: 3 Hours                              Maximum Marks: 180ase 
read the instructions carefully. You are allotted 5 minutes specifically for this purpose. 
INSTRUCTIONS 
A.  General: 
 1. This booklet is your Question Paper. Do not break the seals of this booklet before being instructed to do so 
by the invigilators. 
 2. Blank papers, clipboards, log tables, slide rules, calculators, cameras, cellular phones, pagers and electronic 
gadgets are NOT allowed inside the examination hall. 
 3. Write your name and roll number in the space provided on the back cover of this booklet. 
 4. Answers to the questions and personal details are to be filled on a two-part carbon-less paper, which is 
provided separately. These parts should only be separated at the end of the examination when instructed by 
the invigilator. The upper sheet is a machine-gradable Objective Response Sheet (ORS) which will be 
retained by the invigilator. You will be allowed to take away the bottom sheet at the end of the 
examination. 
 5. Using a black ball point pen darken the bubbles on the upper original sheet.  Apply sufficient pressure 
so that the impression is created on the bottom duplicate sheet. 
 
B. Question Paper Format 
 6. The question paper consists of three parts (Physics, Chemistry and Mathematics). Each part consists of 
three sections. 
  Section 1 contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out 
of which ONE OR MORE are correct  
 7. Section 2 contains 4 paragraphs each describing theory, experiment, data etc. Eight questions relate to 
four paragraphs with two questions on each paragraph. Each question of a paragraph has ONLY ONE 
correct answer among the four choices (A), (B), (C) and (D). 
 8. Section 3 contains 4 multiple choice questions relate to four paragraphs with two questions on each 
paragraph. Each question of a paragraph has ONLY ONE CORRECT ANSWER among the four choices 
(A), (B), (C) and (D). 
C. Marking Scheme 
 9. For each question in Section 1, you will be awarded 3 marks if you darken all the bubble(s) corresponding 
to only the correct answer(s) and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
 10. For each question Section 2 and 3, you will be awarded 3 marks if you darken the bubble corresponding 
to only the correct answer and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
3 
Page 2


FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
 
Note: For the benefit of the students, specially the aspiring ones, the question of JEE(advanced), 2013 are also given in this 
booklet. Keeping the interest of students studying in class XI, the questions based on topics from class XI have been 
marked with ‘*’, which can be attempted as a test. For this test the time allocated in Physics, Chemistry & 
Mathematics and Physics are  22 minutes, 21 minutes and 25 minutes respectively. 
  
FIITJEE SOLUTIONS TO JEE(ADVANCED)-2013 
     
CODE  
PAPER 2 
Time: 3 Hours                              Maximum Marks: 180ase 
read the instructions carefully. You are allotted 5 minutes specifically for this purpose. 
INSTRUCTIONS 
A.  General: 
 1. This booklet is your Question Paper. Do not break the seals of this booklet before being instructed to do so 
by the invigilators. 
 2. Blank papers, clipboards, log tables, slide rules, calculators, cameras, cellular phones, pagers and electronic 
gadgets are NOT allowed inside the examination hall. 
 3. Write your name and roll number in the space provided on the back cover of this booklet. 
 4. Answers to the questions and personal details are to be filled on a two-part carbon-less paper, which is 
provided separately. These parts should only be separated at the end of the examination when instructed by 
the invigilator. The upper sheet is a machine-gradable Objective Response Sheet (ORS) which will be 
retained by the invigilator. You will be allowed to take away the bottom sheet at the end of the 
examination. 
 5. Using a black ball point pen darken the bubbles on the upper original sheet.  Apply sufficient pressure 
so that the impression is created on the bottom duplicate sheet. 
 
B. Question Paper Format 
 6. The question paper consists of three parts (Physics, Chemistry and Mathematics). Each part consists of 
three sections. 
  Section 1 contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out 
of which ONE OR MORE are correct  
 7. Section 2 contains 4 paragraphs each describing theory, experiment, data etc. Eight questions relate to 
four paragraphs with two questions on each paragraph. Each question of a paragraph has ONLY ONE 
correct answer among the four choices (A), (B), (C) and (D). 
 8. Section 3 contains 4 multiple choice questions relate to four paragraphs with two questions on each 
paragraph. Each question of a paragraph has ONLY ONE CORRECT ANSWER among the four choices 
(A), (B), (C) and (D). 
C. Marking Scheme 
 9. For each question in Section 1, you will be awarded 3 marks if you darken all the bubble(s) corresponding 
to only the correct answer(s) and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
 10. For each question Section 2 and 3, you will be awarded 3 marks if you darken the bubble corresponding 
to only the correct answer and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
3 
JEE(ADVANCED)2013-Paper 2-PCM-2 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
  
 
 
SECTION – 1 (One or more options correct Type) 
 
This section contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out of 
which ONE or MORE are correct. 
 
*1. Two bodies, each of mass M, are kept fixed with a separation 2L. A particle of mass m is projected from 
the midpoint of the line joining their centres, perpendicular to the line. The gravitational constant is G. The 
correct statement(s) is (are) 
 (A) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
4
L
 
 (B) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
2
L
. 
 (C)  The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
2GM
L
 
 (D) The energy of the mass m remains constant. 
 
Sol. (B) 
  
2
2GMm 1
mv 0
L 2
?
? ? 
 ?
GM
v 2
L
? 
 Note: The energy of mass ‘m’ means its kinetic energy (KE) only and not the potential energy of interaction 
between m and the two bodies (of mass M each) – which is the potential energy of the system. 
 
*2. A particle of mass m is attached to one end of a mass-less spring of force constant k, lying on a frictionless 
horizontal plane. The other end of the spring is fixed. The particle starts moving horizontally from its 
equilibrium position at time t = 0 with an initial velocity u
0
. When the speed of the particle is 0.5 u
0
. It 
collides elastically with a rigid wall. After this collision, 
 (A) the speed of the particle when it returns to its equilibrium position is u
0
. 
 (B) the time at which the particle passes through the equilibrium position for the first time is 
m
t .
k
? ? 
 (C) the time at which the maximum compression of the spring occurs is 
4 m
t
3 k
?
? . 
 (D) the time at which the particle passes through the equilibrium position for the second time is 
5 m
t .
3 k
?
? 
 
Sol. (A, D) 
 
0
v u sin t ? ? (suppose t
1
 is the time of collision) 
0
0 1
u
u cos t
2
? ? ?
1
t
3
?
?
?
 
 Now the particle returns to equilibrium position at time t
2
 = 2t
1
 i.e. 
2
3
?
?
with the same mechanical energy 
i.e. its speed will u
0
 . 
 Let t
3
 is the time at which the particle passes through the equilibrium position for the second time.  
PART - I: PHYSICS 
Page 3


FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
 
Note: For the benefit of the students, specially the aspiring ones, the question of JEE(advanced), 2013 are also given in this 
booklet. Keeping the interest of students studying in class XI, the questions based on topics from class XI have been 
marked with ‘*’, which can be attempted as a test. For this test the time allocated in Physics, Chemistry & 
Mathematics and Physics are  22 minutes, 21 minutes and 25 minutes respectively. 
  
FIITJEE SOLUTIONS TO JEE(ADVANCED)-2013 
     
CODE  
PAPER 2 
Time: 3 Hours                              Maximum Marks: 180ase 
read the instructions carefully. You are allotted 5 minutes specifically for this purpose. 
INSTRUCTIONS 
A.  General: 
 1. This booklet is your Question Paper. Do not break the seals of this booklet before being instructed to do so 
by the invigilators. 
 2. Blank papers, clipboards, log tables, slide rules, calculators, cameras, cellular phones, pagers and electronic 
gadgets are NOT allowed inside the examination hall. 
 3. Write your name and roll number in the space provided on the back cover of this booklet. 
 4. Answers to the questions and personal details are to be filled on a two-part carbon-less paper, which is 
provided separately. These parts should only be separated at the end of the examination when instructed by 
the invigilator. The upper sheet is a machine-gradable Objective Response Sheet (ORS) which will be 
retained by the invigilator. You will be allowed to take away the bottom sheet at the end of the 
examination. 
 5. Using a black ball point pen darken the bubbles on the upper original sheet.  Apply sufficient pressure 
so that the impression is created on the bottom duplicate sheet. 
 
B. Question Paper Format 
 6. The question paper consists of three parts (Physics, Chemistry and Mathematics). Each part consists of 
three sections. 
  Section 1 contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out 
of which ONE OR MORE are correct  
 7. Section 2 contains 4 paragraphs each describing theory, experiment, data etc. Eight questions relate to 
four paragraphs with two questions on each paragraph. Each question of a paragraph has ONLY ONE 
correct answer among the four choices (A), (B), (C) and (D). 
 8. Section 3 contains 4 multiple choice questions relate to four paragraphs with two questions on each 
paragraph. Each question of a paragraph has ONLY ONE CORRECT ANSWER among the four choices 
(A), (B), (C) and (D). 
C. Marking Scheme 
 9. For each question in Section 1, you will be awarded 3 marks if you darken all the bubble(s) corresponding 
to only the correct answer(s) and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
 10. For each question Section 2 and 3, you will be awarded 3 marks if you darken the bubble corresponding 
to only the correct answer and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
3 
JEE(ADVANCED)2013-Paper 2-PCM-2 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
  
 
 
SECTION – 1 (One or more options correct Type) 
 
This section contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out of 
which ONE or MORE are correct. 
 
*1. Two bodies, each of mass M, are kept fixed with a separation 2L. A particle of mass m is projected from 
the midpoint of the line joining their centres, perpendicular to the line. The gravitational constant is G. The 
correct statement(s) is (are) 
 (A) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
4
L
 
 (B) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
2
L
. 
 (C)  The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
2GM
L
 
 (D) The energy of the mass m remains constant. 
 
Sol. (B) 
  
2
2GMm 1
mv 0
L 2
?
? ? 
 ?
GM
v 2
L
? 
 Note: The energy of mass ‘m’ means its kinetic energy (KE) only and not the potential energy of interaction 
between m and the two bodies (of mass M each) – which is the potential energy of the system. 
 
*2. A particle of mass m is attached to one end of a mass-less spring of force constant k, lying on a frictionless 
horizontal plane. The other end of the spring is fixed. The particle starts moving horizontally from its 
equilibrium position at time t = 0 with an initial velocity u
0
. When the speed of the particle is 0.5 u
0
. It 
collides elastically with a rigid wall. After this collision, 
 (A) the speed of the particle when it returns to its equilibrium position is u
0
. 
 (B) the time at which the particle passes through the equilibrium position for the first time is 
m
t .
k
? ? 
 (C) the time at which the maximum compression of the spring occurs is 
4 m
t
3 k
?
? . 
 (D) the time at which the particle passes through the equilibrium position for the second time is 
5 m
t .
3 k
?
? 
 
Sol. (A, D) 
 
0
v u sin t ? ? (suppose t
1
 is the time of collision) 
0
0 1
u
u cos t
2
? ? ?
1
t
3
?
?
?
 
 Now the particle returns to equilibrium position at time t
2
 = 2t
1
 i.e. 
2
3
?
?
with the same mechanical energy 
i.e. its speed will u
0
 . 
 Let t
3
 is the time at which the particle passes through the equilibrium position for the second time.  
PART - I: PHYSICS 
JEE(ADVANCED)2013-Paper 2-PCM-3 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 ? 
3 1
T
t 2t
2
? ? 
    
2 5
3 3
? ? ?
? ? ?
? ? ?
 
    
5 m
3 k
?
? 
 Energy of particle and spring remains conserved.  
 
3. A steady current I flows along an infinitely long hollow cylindrical conductor of radius R. This cylinder is 
placed coaxially inside an infinite solenoid of radius 2R. The solenoid has n turns per unit length and 
carries a steady current I. Consider a point P at a distance r from the common axis. The correct statement(s) 
is (are) 
 (A) In the region 0 < r < R, the magnetic field is non-zero 
 (B) In the region R < r < 2R, the magnetic field is along the common axis. 
 (C) In the region R < r < 2R, the magnetic field is tangential to the circle of radius r, centered on the axis. 
 (D) In the region r > 2R, the magnetic field is non-zero. 
  
Sol. (A, D) 
 Due to field of solenoid is non zero in region 0 < r < R and non zero in region r>2R due to conductor. 
  
*4. Two vehicles, each moving with speed u on the same horizontal straight road, are approaching each other. 
Wind blows along the road with velocity w. One of these vehicles blows a whistle of frequency 
1
f . An 
observer in the other vehicle hears the frequency of the whistle to be 
2
f . The speed of sound in still air is 
V. The correct statement(s) is (are) 
 (A) If the wind blows from the observer to the source, 
2 1
f f ? . 
 (B) If the wind blows from the source to the observer,
2 1
f f ? . 
 (C) If the wind blows from observer to the source, 
2 1
f f ? . 
 (D) If the wind blows from the source to the observer 
2 1
f f ? . 
 
Sol. (A, B) 
 If wind blows from source to observer  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 When wind blows from observer towards source  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 In both cases, 
2 1
f f ? .  
 
*5. Using the expression 2d sin ? = ?, one calculates the values of d by measuring the corresponding angles ? in 
the range ? to 90°. The wavelength ? is exactly known and the error in ? is constant for all values of ?. As 
? increases from 0°,  
 (A) the absolute error in d remains constant. (B) the absolute error in d increases 
 (C) the fractional error in d remains constant. (D) the fractional error in d decreases.   
 
Sol. (D) 
 d
2sin
?
?
?
 
 ln d ln ln sin
2
? ? ?
? ? ?
? ?
? ?
 
Page 4


FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
 
Note: For the benefit of the students, specially the aspiring ones, the question of JEE(advanced), 2013 are also given in this 
booklet. Keeping the interest of students studying in class XI, the questions based on topics from class XI have been 
marked with ‘*’, which can be attempted as a test. For this test the time allocated in Physics, Chemistry & 
Mathematics and Physics are  22 minutes, 21 minutes and 25 minutes respectively. 
  
FIITJEE SOLUTIONS TO JEE(ADVANCED)-2013 
     
CODE  
PAPER 2 
Time: 3 Hours                              Maximum Marks: 180ase 
read the instructions carefully. You are allotted 5 minutes specifically for this purpose. 
INSTRUCTIONS 
A.  General: 
 1. This booklet is your Question Paper. Do not break the seals of this booklet before being instructed to do so 
by the invigilators. 
 2. Blank papers, clipboards, log tables, slide rules, calculators, cameras, cellular phones, pagers and electronic 
gadgets are NOT allowed inside the examination hall. 
 3. Write your name and roll number in the space provided on the back cover of this booklet. 
 4. Answers to the questions and personal details are to be filled on a two-part carbon-less paper, which is 
provided separately. These parts should only be separated at the end of the examination when instructed by 
the invigilator. The upper sheet is a machine-gradable Objective Response Sheet (ORS) which will be 
retained by the invigilator. You will be allowed to take away the bottom sheet at the end of the 
examination. 
 5. Using a black ball point pen darken the bubbles on the upper original sheet.  Apply sufficient pressure 
so that the impression is created on the bottom duplicate sheet. 
 
B. Question Paper Format 
 6. The question paper consists of three parts (Physics, Chemistry and Mathematics). Each part consists of 
three sections. 
  Section 1 contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out 
of which ONE OR MORE are correct  
 7. Section 2 contains 4 paragraphs each describing theory, experiment, data etc. Eight questions relate to 
four paragraphs with two questions on each paragraph. Each question of a paragraph has ONLY ONE 
correct answer among the four choices (A), (B), (C) and (D). 
 8. Section 3 contains 4 multiple choice questions relate to four paragraphs with two questions on each 
paragraph. Each question of a paragraph has ONLY ONE CORRECT ANSWER among the four choices 
(A), (B), (C) and (D). 
C. Marking Scheme 
 9. For each question in Section 1, you will be awarded 3 marks if you darken all the bubble(s) corresponding 
to only the correct answer(s) and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
 10. For each question Section 2 and 3, you will be awarded 3 marks if you darken the bubble corresponding 
to only the correct answer and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
3 
JEE(ADVANCED)2013-Paper 2-PCM-2 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
  
 
 
SECTION – 1 (One or more options correct Type) 
 
This section contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out of 
which ONE or MORE are correct. 
 
*1. Two bodies, each of mass M, are kept fixed with a separation 2L. A particle of mass m is projected from 
the midpoint of the line joining their centres, perpendicular to the line. The gravitational constant is G. The 
correct statement(s) is (are) 
 (A) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
4
L
 
 (B) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
2
L
. 
 (C)  The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
2GM
L
 
 (D) The energy of the mass m remains constant. 
 
Sol. (B) 
  
2
2GMm 1
mv 0
L 2
?
? ? 
 ?
GM
v 2
L
? 
 Note: The energy of mass ‘m’ means its kinetic energy (KE) only and not the potential energy of interaction 
between m and the two bodies (of mass M each) – which is the potential energy of the system. 
 
*2. A particle of mass m is attached to one end of a mass-less spring of force constant k, lying on a frictionless 
horizontal plane. The other end of the spring is fixed. The particle starts moving horizontally from its 
equilibrium position at time t = 0 with an initial velocity u
0
. When the speed of the particle is 0.5 u
0
. It 
collides elastically with a rigid wall. After this collision, 
 (A) the speed of the particle when it returns to its equilibrium position is u
0
. 
 (B) the time at which the particle passes through the equilibrium position for the first time is 
m
t .
k
? ? 
 (C) the time at which the maximum compression of the spring occurs is 
4 m
t
3 k
?
? . 
 (D) the time at which the particle passes through the equilibrium position for the second time is 
5 m
t .
3 k
?
? 
 
Sol. (A, D) 
 
0
v u sin t ? ? (suppose t
1
 is the time of collision) 
0
0 1
u
u cos t
2
? ? ?
1
t
3
?
?
?
 
 Now the particle returns to equilibrium position at time t
2
 = 2t
1
 i.e. 
2
3
?
?
with the same mechanical energy 
i.e. its speed will u
0
 . 
 Let t
3
 is the time at which the particle passes through the equilibrium position for the second time.  
PART - I: PHYSICS 
JEE(ADVANCED)2013-Paper 2-PCM-3 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 ? 
3 1
T
t 2t
2
? ? 
    
2 5
3 3
? ? ?
? ? ?
? ? ?
 
    
5 m
3 k
?
? 
 Energy of particle and spring remains conserved.  
 
3. A steady current I flows along an infinitely long hollow cylindrical conductor of radius R. This cylinder is 
placed coaxially inside an infinite solenoid of radius 2R. The solenoid has n turns per unit length and 
carries a steady current I. Consider a point P at a distance r from the common axis. The correct statement(s) 
is (are) 
 (A) In the region 0 < r < R, the magnetic field is non-zero 
 (B) In the region R < r < 2R, the magnetic field is along the common axis. 
 (C) In the region R < r < 2R, the magnetic field is tangential to the circle of radius r, centered on the axis. 
 (D) In the region r > 2R, the magnetic field is non-zero. 
  
Sol. (A, D) 
 Due to field of solenoid is non zero in region 0 < r < R and non zero in region r>2R due to conductor. 
  
*4. Two vehicles, each moving with speed u on the same horizontal straight road, are approaching each other. 
Wind blows along the road with velocity w. One of these vehicles blows a whistle of frequency 
1
f . An 
observer in the other vehicle hears the frequency of the whistle to be 
2
f . The speed of sound in still air is 
V. The correct statement(s) is (are) 
 (A) If the wind blows from the observer to the source, 
2 1
f f ? . 
 (B) If the wind blows from the source to the observer,
2 1
f f ? . 
 (C) If the wind blows from observer to the source, 
2 1
f f ? . 
 (D) If the wind blows from the source to the observer 
2 1
f f ? . 
 
Sol. (A, B) 
 If wind blows from source to observer  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 When wind blows from observer towards source  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 In both cases, 
2 1
f f ? .  
 
*5. Using the expression 2d sin ? = ?, one calculates the values of d by measuring the corresponding angles ? in 
the range ? to 90°. The wavelength ? is exactly known and the error in ? is constant for all values of ?. As 
? increases from 0°,  
 (A) the absolute error in d remains constant. (B) the absolute error in d increases 
 (C) the fractional error in d remains constant. (D) the fractional error in d decreases.   
 
Sol. (D) 
 d
2sin
?
?
?
 
 ln d ln ln sin
2
? ? ?
? ? ?
? ?
? ?
 
JEE(ADVANCED)2013-Paper 2-PCM-4 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
d cos d
0
d sin
? ? ?
? ?
?
  
 
max
d
d
? ? ?
? ?
? ?
= cot ? ? ? ? 
 Also 
max
( d) dcot ? ? ? ? ? 
 cot
2sin
?
? ? ?
?
 
 
2
cos
2 sin
? ?
? ? ?
?
 
 As ? increases cot ? decreases and 
2
cos
sin
?
?
also decreases. 
 
6. Two non-conducting spheres of radii R
1
 and R
2
 and carrying 
uniform volume charge densities + ? and – ?, respectively, are 
placed such that they partially overlap, as shown in the figure. 
At all points in the overlapping region,  
 (A) the electrostatic field is zero 
 (B) the electrostatic potential is constant 
 (C) the electrostatic field is constant in magnitude   
 (D) the electrostatic field has same direction 
 
– ? ? 
R
1 
R
2 
 
 
Sol. (C, D) 
 In triangle PC
1
C
2
 
 
2 1
r d r ? ?
?
? ?
 
 The electrostatic field at point P is 
 
? ?
3 3
1 2 2 1
3 3
1 2
4 4
K R r K R r
3 3
E
R R
? ? ? ?
? ? ? ? ?
? ? ? ?
? ? ? ?
? ?
? ?
?
 
 
2 1
4
E K (r r )
3
? ? ? ?
?
? ?
 
 
0
E d
3
?
?
?
? ?
 
 
– ? 
? 
C
1 
R
2 
1
r
?
 
2
r
?
 
R
1 
d
 
P 
C
2 
 
 
*7. The figure shows the variation of specific heat capacity (C) of a solid as a function of temperature (T). The 
temperature is increased continuously from 0 to 500 K at a constant rate. Ignoring any volume change, the 
following statement(s) is (are) correct to a reasonable approximation.  
 (A)  the rate at which heat is absorbed in the range 0-100 K varies linearly with temperature T.  
 (B)  heat absorbed in increasing the temperature from 0-100 K is less than the heat required for increasing 
the temperature from 400 – 500 K.  
 (C)  there is no change in the rate of heat absorption in range 400 – 500 K.  
 (D)  the rate of heat absorption increases in the range 200 – 300 K.  
 
 
C ?
100 ? 200 ? 300 ? 400 ? 500 ?
T (K) ?
 
 
Page 5


FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
 
Note: For the benefit of the students, specially the aspiring ones, the question of JEE(advanced), 2013 are also given in this 
booklet. Keeping the interest of students studying in class XI, the questions based on topics from class XI have been 
marked with ‘*’, which can be attempted as a test. For this test the time allocated in Physics, Chemistry & 
Mathematics and Physics are  22 minutes, 21 minutes and 25 minutes respectively. 
  
FIITJEE SOLUTIONS TO JEE(ADVANCED)-2013 
     
CODE  
PAPER 2 
Time: 3 Hours                              Maximum Marks: 180ase 
read the instructions carefully. You are allotted 5 minutes specifically for this purpose. 
INSTRUCTIONS 
A.  General: 
 1. This booklet is your Question Paper. Do not break the seals of this booklet before being instructed to do so 
by the invigilators. 
 2. Blank papers, clipboards, log tables, slide rules, calculators, cameras, cellular phones, pagers and electronic 
gadgets are NOT allowed inside the examination hall. 
 3. Write your name and roll number in the space provided on the back cover of this booklet. 
 4. Answers to the questions and personal details are to be filled on a two-part carbon-less paper, which is 
provided separately. These parts should only be separated at the end of the examination when instructed by 
the invigilator. The upper sheet is a machine-gradable Objective Response Sheet (ORS) which will be 
retained by the invigilator. You will be allowed to take away the bottom sheet at the end of the 
examination. 
 5. Using a black ball point pen darken the bubbles on the upper original sheet.  Apply sufficient pressure 
so that the impression is created on the bottom duplicate sheet. 
 
B. Question Paper Format 
 6. The question paper consists of three parts (Physics, Chemistry and Mathematics). Each part consists of 
three sections. 
  Section 1 contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out 
of which ONE OR MORE are correct  
 7. Section 2 contains 4 paragraphs each describing theory, experiment, data etc. Eight questions relate to 
four paragraphs with two questions on each paragraph. Each question of a paragraph has ONLY ONE 
correct answer among the four choices (A), (B), (C) and (D). 
 8. Section 3 contains 4 multiple choice questions relate to four paragraphs with two questions on each 
paragraph. Each question of a paragraph has ONLY ONE CORRECT ANSWER among the four choices 
(A), (B), (C) and (D). 
C. Marking Scheme 
 9. For each question in Section 1, you will be awarded 3 marks if you darken all the bubble(s) corresponding 
to only the correct answer(s) and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
 10. For each question Section 2 and 3, you will be awarded 3 marks if you darken the bubble corresponding 
to only the correct answer and zero mark if no bubbles are darkened. In all other cases, minus one (–1) 
mark will be awarded. 
3 
JEE(ADVANCED)2013-Paper 2-PCM-2 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
  
 
 
SECTION – 1 (One or more options correct Type) 
 
This section contains 8 multiple choice questions. Each question has four choices (A), (B), (C) and (D) out of 
which ONE or MORE are correct. 
 
*1. Two bodies, each of mass M, are kept fixed with a separation 2L. A particle of mass m is projected from 
the midpoint of the line joining their centres, perpendicular to the line. The gravitational constant is G. The 
correct statement(s) is (are) 
 (A) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
4
L
 
 (B) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
GM
2
L
. 
 (C)  The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 
2GM
L
 
 (D) The energy of the mass m remains constant. 
 
Sol. (B) 
  
2
2GMm 1
mv 0
L 2
?
? ? 
 ?
GM
v 2
L
? 
 Note: The energy of mass ‘m’ means its kinetic energy (KE) only and not the potential energy of interaction 
between m and the two bodies (of mass M each) – which is the potential energy of the system. 
 
*2. A particle of mass m is attached to one end of a mass-less spring of force constant k, lying on a frictionless 
horizontal plane. The other end of the spring is fixed. The particle starts moving horizontally from its 
equilibrium position at time t = 0 with an initial velocity u
0
. When the speed of the particle is 0.5 u
0
. It 
collides elastically with a rigid wall. After this collision, 
 (A) the speed of the particle when it returns to its equilibrium position is u
0
. 
 (B) the time at which the particle passes through the equilibrium position for the first time is 
m
t .
k
? ? 
 (C) the time at which the maximum compression of the spring occurs is 
4 m
t
3 k
?
? . 
 (D) the time at which the particle passes through the equilibrium position for the second time is 
5 m
t .
3 k
?
? 
 
Sol. (A, D) 
 
0
v u sin t ? ? (suppose t
1
 is the time of collision) 
0
0 1
u
u cos t
2
? ? ?
1
t
3
?
?
?
 
 Now the particle returns to equilibrium position at time t
2
 = 2t
1
 i.e. 
2
3
?
?
with the same mechanical energy 
i.e. its speed will u
0
 . 
 Let t
3
 is the time at which the particle passes through the equilibrium position for the second time.  
PART - I: PHYSICS 
JEE(ADVANCED)2013-Paper 2-PCM-3 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 ? 
3 1
T
t 2t
2
? ? 
    
2 5
3 3
? ? ?
? ? ?
? ? ?
 
    
5 m
3 k
?
? 
 Energy of particle and spring remains conserved.  
 
3. A steady current I flows along an infinitely long hollow cylindrical conductor of radius R. This cylinder is 
placed coaxially inside an infinite solenoid of radius 2R. The solenoid has n turns per unit length and 
carries a steady current I. Consider a point P at a distance r from the common axis. The correct statement(s) 
is (are) 
 (A) In the region 0 < r < R, the magnetic field is non-zero 
 (B) In the region R < r < 2R, the magnetic field is along the common axis. 
 (C) In the region R < r < 2R, the magnetic field is tangential to the circle of radius r, centered on the axis. 
 (D) In the region r > 2R, the magnetic field is non-zero. 
  
Sol. (A, D) 
 Due to field of solenoid is non zero in region 0 < r < R and non zero in region r>2R due to conductor. 
  
*4. Two vehicles, each moving with speed u on the same horizontal straight road, are approaching each other. 
Wind blows along the road with velocity w. One of these vehicles blows a whistle of frequency 
1
f . An 
observer in the other vehicle hears the frequency of the whistle to be 
2
f . The speed of sound in still air is 
V. The correct statement(s) is (are) 
 (A) If the wind blows from the observer to the source, 
2 1
f f ? . 
 (B) If the wind blows from the source to the observer,
2 1
f f ? . 
 (C) If the wind blows from observer to the source, 
2 1
f f ? . 
 (D) If the wind blows from the source to the observer 
2 1
f f ? . 
 
Sol. (A, B) 
 If wind blows from source to observer  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 When wind blows from observer towards source  
 
2 1
V w u
f f
V w u
? ? ? ?
?
? ?
? ?
? ?
 
 In both cases, 
2 1
f f ? .  
 
*5. Using the expression 2d sin ? = ?, one calculates the values of d by measuring the corresponding angles ? in 
the range ? to 90°. The wavelength ? is exactly known and the error in ? is constant for all values of ?. As 
? increases from 0°,  
 (A) the absolute error in d remains constant. (B) the absolute error in d increases 
 (C) the fractional error in d remains constant. (D) the fractional error in d decreases.   
 
Sol. (D) 
 d
2sin
?
?
?
 
 ln d ln ln sin
2
? ? ?
? ? ?
? ?
? ?
 
JEE(ADVANCED)2013-Paper 2-PCM-4 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
 
d cos d
0
d sin
? ? ?
? ?
?
  
 
max
d
d
? ? ?
? ?
? ?
= cot ? ? ? ? 
 Also 
max
( d) dcot ? ? ? ? ? 
 cot
2sin
?
? ? ?
?
 
 
2
cos
2 sin
? ?
? ? ?
?
 
 As ? increases cot ? decreases and 
2
cos
sin
?
?
also decreases. 
 
6. Two non-conducting spheres of radii R
1
 and R
2
 and carrying 
uniform volume charge densities + ? and – ?, respectively, are 
placed such that they partially overlap, as shown in the figure. 
At all points in the overlapping region,  
 (A) the electrostatic field is zero 
 (B) the electrostatic potential is constant 
 (C) the electrostatic field is constant in magnitude   
 (D) the electrostatic field has same direction 
 
– ? ? 
R
1 
R
2 
 
 
Sol. (C, D) 
 In triangle PC
1
C
2
 
 
2 1
r d r ? ?
?
? ?
 
 The electrostatic field at point P is 
 
? ?
3 3
1 2 2 1
3 3
1 2
4 4
K R r K R r
3 3
E
R R
? ? ? ?
? ? ? ? ?
? ? ? ?
? ? ? ?
? ?
? ?
?
 
 
2 1
4
E K (r r )
3
? ? ? ?
?
? ?
 
 
0
E d
3
?
?
?
? ?
 
 
– ? 
? 
C
1 
R
2 
1
r
?
 
2
r
?
 
R
1 
d
 
P 
C
2 
 
 
*7. The figure shows the variation of specific heat capacity (C) of a solid as a function of temperature (T). The 
temperature is increased continuously from 0 to 500 K at a constant rate. Ignoring any volume change, the 
following statement(s) is (are) correct to a reasonable approximation.  
 (A)  the rate at which heat is absorbed in the range 0-100 K varies linearly with temperature T.  
 (B)  heat absorbed in increasing the temperature from 0-100 K is less than the heat required for increasing 
the temperature from 400 – 500 K.  
 (C)  there is no change in the rate of heat absorption in range 400 – 500 K.  
 (D)  the rate of heat absorption increases in the range 200 – 300 K.  
 
 
C ?
100 ? 200 ? 300 ? 400 ? 500 ?
T (K) ?
 
 
JEE(ADVANCED)2013-Paper 2-PCM-5 
 
 
FIITJEE Ltd., FIITJEE House, 29-A, Kalu  Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942 
website: www.fiitjee.com. 
Sol. (A, B, C, D) 
 Option (A) is correct because the graph between (0 – 100 K) appears to be a straight line upto a reasonable 
approximation.  
 Option (B) is correct because area under the curve in the temperature range (0 ? 100 K) is less than in 
range (400 ? 500 K.)  
 Option (C) is correct because the graph of C versus T is constant in the temperature range (400 ? 500 K)  
 Option (D) is correct because in the temperature range (200 – 300 K) specific heat capacity increases with 
temperature.  
 
8. The radius of the orbit of an electron in a Hydrogen-like atom is 4.5 a
0
 where a
0
 is the Bohr radius. Its 
orbital angular momentum is 
3h
2 ?
. It is given that h is Planck’s constant and R is Rydberg constant. The 
possible wavelength(s), when the atom de-excites, is (are)  
 (A) 
9
32R
 (B) 
9
16R
 (C) 
9
5R
 (D) 
4
3R
 
 
Sol. (A, C) 
 Given data 
 
2
0 0
n
4.5a a
Z
? …(i) 
 
nh 3h
2 2
?
? ?
 …(ii) 
 So n = 3 and z = 2  
 So possible wavelength are  
 
2
2 2
1
1 1 1
RZ
1 3
? ?
? ?
? ?
? ? ?
? 
1
9
32R
? ? 
  
2
2 2
2
1 1 1
RZ
1 2
? ?
? ?
? ?
? ? ?
? 
2
1
3R
? ? 
 
2
2 2
3
1 1 1
RZ
2 3
? ?
? ?
? ?
? ? ?
? 
3
9
5R
? ? 
 
   
SECTION – 2 : (Paragraph Type) 
 
This section contains 4 paragraphs each describing theory, experiment, date etc. Eight questions relate to four 
paragraphs with two questions on each paragraph. Each question of paragraph has only one correct answer along 
the four choice (A), (B), (C) and (D).  
 
Paragraph for Questions 9 to 10 
 
A small block of mass 1 kg is released from rest at the top of a rough track. The track is circular arc of radius 40 m. 
The block slides along the track without toppling and a frictional force acts on it in the direction opposite to the 
instantaneous velocity. The work done in overcoming the friction up to the point Q, as shown in the figure, below, is 
150 J. (Take the acceleration due to gravity, g = 10 m/s
?2
).  
 
R ?
R ?
P ?
Q ?
30 ? ?
 
Read More
Offer running on EduRev: Apply code STAYHOME200 to get INR 200 off on our premium plan EduRev Infinity!

Content Category

Related Searches

IIT-JEE 2013 Paper Advanced-2 (solved) Class 12 Notes | EduRev

,

Previous Year Questions with Solutions

,

video lectures

,

mock tests for examination

,

shortcuts and tricks

,

Viva Questions

,

Sample Paper

,

practice quizzes

,

MCQs

,

Important questions

,

past year papers

,

Summary

,

Objective type Questions

,

IIT-JEE 2013 Paper Advanced-2 (solved) Class 12 Notes | EduRev

,

Semester Notes

,

Free

,

Exam

,

study material

,

pdf

,

IIT-JEE 2013 Paper Advanced-2 (solved) Class 12 Notes | EduRev

,

Extra Questions

,

ppt

;