JEE Exam  >  JEE Notes  >  Physics for JEE Main & Advanced  >  Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024)

Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024) | Physics for JEE Main & Advanced PDF Download

Download, print and study this document offline
Please wait while the PDF view is loading
 Page 1


Previous Year Questions (2021-24): 
Mechanical Properties of Solids 
Q1 - 2024 (01 Feb Shift 1) 
With rise in temperature, the Young's modulus of elasticity 
(1) changes erratically 
(2) decreases 
(3) increases 
(4) remains unchanged 
Q2 - 2024 (01 Feb Shift 2) 
One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the 
other end. A similar wire is attached to the bottom of the load and another load of 
1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire 
to that of the lower wire will be 
[Area of cross section of wire = 0.005 cm
2
, Y = 2 × 10
11
Nm
-2
 and g = 10 ms
-2
 ] 
Q3 - 2024 (27 Jan Shift 1) 
If average depth of an ocean is 4000 m and the bulk modulus of water is 
2 × 10
9
Nm
-2
, then fractional compression 
??? ?? of water at the bottom of ocean is 
?? × 10
-2
. The value of ?? is (Given, g = 10 ms
-2
, ?? = 1000 kg m
-3
) 
Q4 - 2024 (27 Jan Shift 2) 
Given below are two statements : one is labelled as Assertion (A) and the other 
is labelled as Reason (R) Assertion (A) : The property of body, by virtue of which 
it tends to regain its original shape when the external force is removed, is 
Elasticity. 
Reason (R) : The restoring force depends upon the bonded inter atomic and inter 
molecular force of solid. In the light of the above statements, choose the correct 
answer from the options given below : 
(1) (A) is false but (R) is true 
(2) (A) is true but (R) is false 
Page 2


Previous Year Questions (2021-24): 
Mechanical Properties of Solids 
Q1 - 2024 (01 Feb Shift 1) 
With rise in temperature, the Young's modulus of elasticity 
(1) changes erratically 
(2) decreases 
(3) increases 
(4) remains unchanged 
Q2 - 2024 (01 Feb Shift 2) 
One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the 
other end. A similar wire is attached to the bottom of the load and another load of 
1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire 
to that of the lower wire will be 
[Area of cross section of wire = 0.005 cm
2
, Y = 2 × 10
11
Nm
-2
 and g = 10 ms
-2
 ] 
Q3 - 2024 (27 Jan Shift 1) 
If average depth of an ocean is 4000 m and the bulk modulus of water is 
2 × 10
9
Nm
-2
, then fractional compression 
??? ?? of water at the bottom of ocean is 
?? × 10
-2
. The value of ?? is (Given, g = 10 ms
-2
, ?? = 1000 kg m
-3
) 
Q4 - 2024 (27 Jan Shift 2) 
Given below are two statements : one is labelled as Assertion (A) and the other 
is labelled as Reason (R) Assertion (A) : The property of body, by virtue of which 
it tends to regain its original shape when the external force is removed, is 
Elasticity. 
Reason (R) : The restoring force depends upon the bonded inter atomic and inter 
molecular force of solid. In the light of the above statements, choose the correct 
answer from the options given below : 
(1) (A) is false but (R) is true 
(2) (A) is true but (R) is false 
(3) Both (A) and (R) are true and (R) is the correct explanation (A) 
(4) Both (A) and (R) are true but (R) is not the correct explanation of (A) 
Q5 - 2024 (29 Jan Shift 2) 
A wire of length ?? and radius ?? is clamped at one end. If its other end is pulled by 
a force F, its length increases by ?? . If the radius of the wire and the applied force 
both are reduced to half of their original values keeping original length constant, 
the increase in length will become. 
(1) 3 times 
(2) 3/2 times 
(3) 4 times 
(4) 2 times 
Q6 - 2024 (29 Jan Shift 2) 
Two metallic wires P and Q have same volume and are made up of same 
material. If their area of cross sections are in the ratio 4: 1 and force ?? 1
 is applied 
to P, an extension of ? ?? is produced. The force which is required to produce same 
extension in Q is F
2
. 
The value of 
?? 1
?? 2
 is $ \qquad $ 
Q7 - 2024 (30 Jan Shift 1) 
Each of three blocks P, Q and R shown in figure has a mass of 3 kg. Each of the 
wire A and B has crosssectional area 0.005 cm
2
 and Young's modulus 2 ×
10
11
 N m
-2
. Neglecting friction, the longitudinal strain on wire B is $ \qquad $ 
× 10
-4
· ( Take g = 10 m/s
2
) 
R $ \qquad $ 
Q8 - 2024 (31 Jan Shift 1) 
The depth below the surface of sea to which a rubber ball be taken so as to 
decrease its volume by 0.02% is $ \qquad $ m. 
(Take density of sea water = 10
3
kgm
-3
, Bulk modulus of rubber = 9 × 10
8
Nm
-2
, 
and g = 10 ms
-2
 ) 
Q9 - 2024 (31 Jan Shift 2) 
Page 3


Previous Year Questions (2021-24): 
Mechanical Properties of Solids 
Q1 - 2024 (01 Feb Shift 1) 
With rise in temperature, the Young's modulus of elasticity 
(1) changes erratically 
(2) decreases 
(3) increases 
(4) remains unchanged 
Q2 - 2024 (01 Feb Shift 2) 
One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the 
other end. A similar wire is attached to the bottom of the load and another load of 
1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire 
to that of the lower wire will be 
[Area of cross section of wire = 0.005 cm
2
, Y = 2 × 10
11
Nm
-2
 and g = 10 ms
-2
 ] 
Q3 - 2024 (27 Jan Shift 1) 
If average depth of an ocean is 4000 m and the bulk modulus of water is 
2 × 10
9
Nm
-2
, then fractional compression 
??? ?? of water at the bottom of ocean is 
?? × 10
-2
. The value of ?? is (Given, g = 10 ms
-2
, ?? = 1000 kg m
-3
) 
Q4 - 2024 (27 Jan Shift 2) 
Given below are two statements : one is labelled as Assertion (A) and the other 
is labelled as Reason (R) Assertion (A) : The property of body, by virtue of which 
it tends to regain its original shape when the external force is removed, is 
Elasticity. 
Reason (R) : The restoring force depends upon the bonded inter atomic and inter 
molecular force of solid. In the light of the above statements, choose the correct 
answer from the options given below : 
(1) (A) is false but (R) is true 
(2) (A) is true but (R) is false 
(3) Both (A) and (R) are true and (R) is the correct explanation (A) 
(4) Both (A) and (R) are true but (R) is not the correct explanation of (A) 
Q5 - 2024 (29 Jan Shift 2) 
A wire of length ?? and radius ?? is clamped at one end. If its other end is pulled by 
a force F, its length increases by ?? . If the radius of the wire and the applied force 
both are reduced to half of their original values keeping original length constant, 
the increase in length will become. 
(1) 3 times 
(2) 3/2 times 
(3) 4 times 
(4) 2 times 
Q6 - 2024 (29 Jan Shift 2) 
Two metallic wires P and Q have same volume and are made up of same 
material. If their area of cross sections are in the ratio 4: 1 and force ?? 1
 is applied 
to P, an extension of ? ?? is produced. The force which is required to produce same 
extension in Q is F
2
. 
The value of 
?? 1
?? 2
 is $ \qquad $ 
Q7 - 2024 (30 Jan Shift 1) 
Each of three blocks P, Q and R shown in figure has a mass of 3 kg. Each of the 
wire A and B has crosssectional area 0.005 cm
2
 and Young's modulus 2 ×
10
11
 N m
-2
. Neglecting friction, the longitudinal strain on wire B is $ \qquad $ 
× 10
-4
· ( Take g = 10 m/s
2
) 
R $ \qquad $ 
Q8 - 2024 (31 Jan Shift 1) 
The depth below the surface of sea to which a rubber ball be taken so as to 
decrease its volume by 0.02% is $ \qquad $ m. 
(Take density of sea water = 10
3
kgm
-3
, Bulk modulus of rubber = 9 × 10
8
Nm
-2
, 
and g = 10 ms
-2
 ) 
Q9 - 2024 (31 Jan Shift 2) 
Two blocks of mass 2 kg and 4 kg are connected by a metal wire going over a 
smooth pulley as shown in figure. The radius of wire is 4.0 × 10
-5
 m and Young's 
modulus of the metal is 2.0 × 10
11
 N/m
2
. The longitudinal strain developed in the 
wire is 
1
????
. The value of ?? is $ \qquad $ [ Use g = 10 m/s
2
) 
 
Answer Key 
Q1(Conceptual question) 
Q2 (3) 
Q3 (2) 
Q4 (3) 
Q5 (4) 
Q6 (16) 
Q7 (2) 
Q8 (18) 
Q9 (12) 
 
 
Page 4


Previous Year Questions (2021-24): 
Mechanical Properties of Solids 
Q1 - 2024 (01 Feb Shift 1) 
With rise in temperature, the Young's modulus of elasticity 
(1) changes erratically 
(2) decreases 
(3) increases 
(4) remains unchanged 
Q2 - 2024 (01 Feb Shift 2) 
One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the 
other end. A similar wire is attached to the bottom of the load and another load of 
1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire 
to that of the lower wire will be 
[Area of cross section of wire = 0.005 cm
2
, Y = 2 × 10
11
Nm
-2
 and g = 10 ms
-2
 ] 
Q3 - 2024 (27 Jan Shift 1) 
If average depth of an ocean is 4000 m and the bulk modulus of water is 
2 × 10
9
Nm
-2
, then fractional compression 
??? ?? of water at the bottom of ocean is 
?? × 10
-2
. The value of ?? is (Given, g = 10 ms
-2
, ?? = 1000 kg m
-3
) 
Q4 - 2024 (27 Jan Shift 2) 
Given below are two statements : one is labelled as Assertion (A) and the other 
is labelled as Reason (R) Assertion (A) : The property of body, by virtue of which 
it tends to regain its original shape when the external force is removed, is 
Elasticity. 
Reason (R) : The restoring force depends upon the bonded inter atomic and inter 
molecular force of solid. In the light of the above statements, choose the correct 
answer from the options given below : 
(1) (A) is false but (R) is true 
(2) (A) is true but (R) is false 
(3) Both (A) and (R) are true and (R) is the correct explanation (A) 
(4) Both (A) and (R) are true but (R) is not the correct explanation of (A) 
Q5 - 2024 (29 Jan Shift 2) 
A wire of length ?? and radius ?? is clamped at one end. If its other end is pulled by 
a force F, its length increases by ?? . If the radius of the wire and the applied force 
both are reduced to half of their original values keeping original length constant, 
the increase in length will become. 
(1) 3 times 
(2) 3/2 times 
(3) 4 times 
(4) 2 times 
Q6 - 2024 (29 Jan Shift 2) 
Two metallic wires P and Q have same volume and are made up of same 
material. If their area of cross sections are in the ratio 4: 1 and force ?? 1
 is applied 
to P, an extension of ? ?? is produced. The force which is required to produce same 
extension in Q is F
2
. 
The value of 
?? 1
?? 2
 is $ \qquad $ 
Q7 - 2024 (30 Jan Shift 1) 
Each of three blocks P, Q and R shown in figure has a mass of 3 kg. Each of the 
wire A and B has crosssectional area 0.005 cm
2
 and Young's modulus 2 ×
10
11
 N m
-2
. Neglecting friction, the longitudinal strain on wire B is $ \qquad $ 
× 10
-4
· ( Take g = 10 m/s
2
) 
R $ \qquad $ 
Q8 - 2024 (31 Jan Shift 1) 
The depth below the surface of sea to which a rubber ball be taken so as to 
decrease its volume by 0.02% is $ \qquad $ m. 
(Take density of sea water = 10
3
kgm
-3
, Bulk modulus of rubber = 9 × 10
8
Nm
-2
, 
and g = 10 ms
-2
 ) 
Q9 - 2024 (31 Jan Shift 2) 
Two blocks of mass 2 kg and 4 kg are connected by a metal wire going over a 
smooth pulley as shown in figure. The radius of wire is 4.0 × 10
-5
 m and Young's 
modulus of the metal is 2.0 × 10
11
 N/m
2
. The longitudinal strain developed in the 
wire is 
1
????
. The value of ?? is $ \qquad $ [ Use g = 10 m/s
2
) 
 
Answer Key 
Q1(Conceptual question) 
Q2 (3) 
Q3 (2) 
Q4 (3) 
Q5 (4) 
Q6 (16) 
Q7 (2) 
Q8 (18) 
Q9 (12) 
 
 
Solutions 
Q1 
Conceptual questions 
Q2 
 
?? 1
= 30 N
2 kg
 T
2
= 10 N
1 kg
 
? L
L
=
F
AY
 
? L
1
 L
1
? L
2
 L
2
=
F
1
 F
2
=
30
10
= 3 
Q3 
B = -
? P
(
? V
V
)
 
- (
? V
V
) =
?? gh
B
=
1000× 10 × 4000
2 × 10
9
 
= 2 × 10
-2
[-ve sign represent compression ] 
Q4 
Theory 
Q5 
Y =
 stress 
 strain 
 
Y =
F
l
2
l
L
 
F = Y?? r
2
×
l
L
. 
Page 5


Previous Year Questions (2021-24): 
Mechanical Properties of Solids 
Q1 - 2024 (01 Feb Shift 1) 
With rise in temperature, the Young's modulus of elasticity 
(1) changes erratically 
(2) decreases 
(3) increases 
(4) remains unchanged 
Q2 - 2024 (01 Feb Shift 2) 
One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the 
other end. A similar wire is attached to the bottom of the load and another load of 
1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire 
to that of the lower wire will be 
[Area of cross section of wire = 0.005 cm
2
, Y = 2 × 10
11
Nm
-2
 and g = 10 ms
-2
 ] 
Q3 - 2024 (27 Jan Shift 1) 
If average depth of an ocean is 4000 m and the bulk modulus of water is 
2 × 10
9
Nm
-2
, then fractional compression 
??? ?? of water at the bottom of ocean is 
?? × 10
-2
. The value of ?? is (Given, g = 10 ms
-2
, ?? = 1000 kg m
-3
) 
Q4 - 2024 (27 Jan Shift 2) 
Given below are two statements : one is labelled as Assertion (A) and the other 
is labelled as Reason (R) Assertion (A) : The property of body, by virtue of which 
it tends to regain its original shape when the external force is removed, is 
Elasticity. 
Reason (R) : The restoring force depends upon the bonded inter atomic and inter 
molecular force of solid. In the light of the above statements, choose the correct 
answer from the options given below : 
(1) (A) is false but (R) is true 
(2) (A) is true but (R) is false 
(3) Both (A) and (R) are true and (R) is the correct explanation (A) 
(4) Both (A) and (R) are true but (R) is not the correct explanation of (A) 
Q5 - 2024 (29 Jan Shift 2) 
A wire of length ?? and radius ?? is clamped at one end. If its other end is pulled by 
a force F, its length increases by ?? . If the radius of the wire and the applied force 
both are reduced to half of their original values keeping original length constant, 
the increase in length will become. 
(1) 3 times 
(2) 3/2 times 
(3) 4 times 
(4) 2 times 
Q6 - 2024 (29 Jan Shift 2) 
Two metallic wires P and Q have same volume and are made up of same 
material. If their area of cross sections are in the ratio 4: 1 and force ?? 1
 is applied 
to P, an extension of ? ?? is produced. The force which is required to produce same 
extension in Q is F
2
. 
The value of 
?? 1
?? 2
 is $ \qquad $ 
Q7 - 2024 (30 Jan Shift 1) 
Each of three blocks P, Q and R shown in figure has a mass of 3 kg. Each of the 
wire A and B has crosssectional area 0.005 cm
2
 and Young's modulus 2 ×
10
11
 N m
-2
. Neglecting friction, the longitudinal strain on wire B is $ \qquad $ 
× 10
-4
· ( Take g = 10 m/s
2
) 
R $ \qquad $ 
Q8 - 2024 (31 Jan Shift 1) 
The depth below the surface of sea to which a rubber ball be taken so as to 
decrease its volume by 0.02% is $ \qquad $ m. 
(Take density of sea water = 10
3
kgm
-3
, Bulk modulus of rubber = 9 × 10
8
Nm
-2
, 
and g = 10 ms
-2
 ) 
Q9 - 2024 (31 Jan Shift 2) 
Two blocks of mass 2 kg and 4 kg are connected by a metal wire going over a 
smooth pulley as shown in figure. The radius of wire is 4.0 × 10
-5
 m and Young's 
modulus of the metal is 2.0 × 10
11
 N/m
2
. The longitudinal strain developed in the 
wire is 
1
????
. The value of ?? is $ \qquad $ [ Use g = 10 m/s
2
) 
 
Answer Key 
Q1(Conceptual question) 
Q2 (3) 
Q3 (2) 
Q4 (3) 
Q5 (4) 
Q6 (16) 
Q7 (2) 
Q8 (18) 
Q9 (12) 
 
 
Solutions 
Q1 
Conceptual questions 
Q2 
 
?? 1
= 30 N
2 kg
 T
2
= 10 N
1 kg
 
? L
L
=
F
AY
 
? L
1
 L
1
? L
2
 L
2
=
F
1
 F
2
=
30
10
= 3 
Q3 
B = -
? P
(
? V
V
)
 
- (
? V
V
) =
?? gh
B
=
1000× 10 × 4000
2 × 10
9
 
= 2 × 10
-2
[-ve sign represent compression ] 
Q4 
Theory 
Q5 
Y =
 stress 
 strain 
 
Y =
F
l
2
l
L
 
F = Y?? r
2
×
l
L
. 
Y =
Fr /2
? l
2
 L
 
F = Y
? l
L
× 2 ×
?? r
2
4
 
From (i) 
Y?? r
2
l
L
= Y
? l
L
?? r
2
2
 
? l = 2l 
Q6 
Y =
 Stress 
 Strain 
=
F/A
? l/l
=
Fl
A ? l
 
? l =
Fl
AY
 
V = A l ? l =
V
A
 
? l =
FV
A
2
Y
 
Y \ & V is same for both the wires 
? l ?
F
A
2
 
? l
1
? l
2
=
?? 1
?? 1
2
×
?? 2
2
?? 2
 
? l
1
= ? l
2
 
F
1
 A
2
2
= F
2
 A
1
2
 
?? 1
?? 2
=
?? 1
2
?? 2
2
= (
4
1
)
2
= 16 
 
 
 
 
Read More
289 videos|635 docs|179 tests

Top Courses for JEE

FAQs on Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024) - Physics for JEE Main & Advanced

1. What are the different mechanical properties of solids that are commonly studied?
Ans. The commonly studied mechanical properties of solids include elasticity, plasticity, ductility, hardness, toughness, and strength.
2. How are the mechanical properties of solids important in material science and engineering?
Ans. The mechanical properties of solids are crucial in determining the suitability of materials for various applications, understanding their behavior under different conditions, and designing new materials with specific properties.
3. What is the difference between hardness and toughness in the context of mechanical properties of solids?
Ans. Hardness refers to a material's ability to resist deformation or indentation, while toughness is the ability of a material to absorb energy and plastically deform without fracturing.
4. How does the structure of a solid material influence its mechanical properties?
Ans. The structure of a solid material, such as its crystal lattice, grain size, and defects, plays a significant role in determining its mechanical properties like strength, ductility, and hardness.
5. Can you provide an example of how knowledge of the mechanical properties of solids is applied in real-world engineering applications?
Ans. One example is the selection of materials for building bridges, where strength, toughness, and fatigue resistance are crucial considerations to ensure the safety and longevity of the structure.
289 videos|635 docs|179 tests
Download as PDF
Explore Courses for JEE exam

Top Courses for JEE

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

MCQs

,

Extra Questions

,

Objective type Questions

,

study material

,

practice quizzes

,

Sample Paper

,

shortcuts and tricks

,

Exam

,

Previous Year Questions with Solutions

,

Semester Notes

,

mock tests for examination

,

Summary

,

Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024) | Physics for JEE Main & Advanced

,

video lectures

,

Free

,

Important questions

,

ppt

,

Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024) | Physics for JEE Main & Advanced

,

Mechanical Properties of Solids: JEE Mains Previous Year Questions (2021-2024) | Physics for JEE Main & Advanced

,

Viva Questions

,

pdf

,

past year papers

;