Civil Engineering (CE) Exam  >  Civil Engineering (CE) Notes  >  Environmental Engineering  >  Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE) PDF Download

Q. 1: Dupuit’s assumptions are valid for      [2018 : 1 Mark, Set-II]
(a) artesian aquifer
(b) confined aquifer
(c) leaky aquifer
(d) unconfined aquifer
Ans: (d)
Dupuit’s theory assumptions hold that groundwater flows horizontally in an unconfined aquifer and that ground water discharge is proportional to saturated aquifer thickness.

Q. 2: Water table of an aquifer drops by 100 cm over an area of 1000 km2. The porosity and specific retention of the aquifer material are 25% and 5%, respectively. The amount of water (expressed in km3 ) drained out from the area is__________..     [2016 : 1 Mark, Set-II]
Ans: 0.2km3

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

Q. 3: A tracer takes 100 days to travel from Well-1 to Well-2 which are 100 m apart. The elevation of water surface in Well-2 is 3 m below that in Well-1. Assuming porosity equal to 15%, the coefficient of permeability (expressed in m/day) is     [2016 : 2 Marks, Set-II]
(a) 0.30
(b) 0.45
(c) 1.00
(d) 5.00 
Ans: (d)
Seepage velocity

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

Q. 4: The hardness of a ground water sample was found to be 420 mg/L as CaC03. A softener containing ion exchange resins was installed to reduce the total hardness to 75 mg/L as CaC03 before supplying to 4 households. Each household gets treated water at a rate of 540L/day. If the efficiency of the softener is 100%, the bypass flow rate (expressed in L/day) is_______     [2016 :1 Mark, Set-II]
Ans:  385.7 l/day

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

Total water to be treated
= 540 x 4 = 2160 l/day
Resultant hardness required = 75 mg/l.
Let bypass rate be x l/day having hardness of 420 mg/l
Resultant hardness required = 75 mg/l

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

Q. 5:  The relationship between porosity (η), specific yield (Sy) and specific retention (Sr) of an unconfined aquifer is    [2015 : 1 Mark, Set-Il]
(a) Sy + Sr = η
(b) Sy + η = Sr
(c) Sr + η = Sy 
(d) Sy + Sr + η = 1 
Ans: (a)

Q. 6:  In an aquifer extending over 150 hectare, the water table was 20m below ground level. Over a period of time the water table dropped to 23m below the ground level. If the porosity of aquifer is 0.40 and the specific retention is 0.15, what is the change in ground water storage of the aquifer?    [2011 : 2 Marks]
(a) 67.5 ha-m
(b) 112.5ha-m
(c) 180.0 ha-m
(d) 450.0 ha-m
Ans: (b)
We know that,
Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

The negative sign signifies the decrease in storage.

Change in volume of aquifer
= 150 x ( 23 - 20 ) = 450 ha-m
Specific yield is nothing but the actual volume of water that can be extracted by force of gravity from a unit volume of aquifer.

∴ Change in water storage
 = 450x0.25 = 112.5 ha-m

Q. 7  A well of diameter 20 cm fully penetrates a confined aquifer. After a long period of pumping at a rate of 2720 litres per minute, the observations of drawdown taken at 10m and 100m distances from the centre of the well are found to be 3m and 0.5 m respectively. The transmissivity of the aquifer is     [2010 : 2 Marks]
(a) 676m2/day
(b) 576m2/day 
(c) 526m2/day 
(d) 249m2/day
Ans:  576 m2/day

Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

The document Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE) is a part of the Civil Engineering (CE) Course Environmental Engineering.
All you need of Civil Engineering (CE) at this link: Civil Engineering (CE)
14 videos|99 docs|98 tests

Top Courses for Civil Engineering (CE)

FAQs on Past Year Questions: Sources of Water Supply, Distribution System & Well Hydraulics - Environmental Engineering - Civil Engineering (CE)

1. What are the different sources of water supply?
Ans. The different sources of water supply include surface water (rivers, lakes, and reservoirs), groundwater (wells and springs), and rainwater harvesting.
2. How is water distributed in a distribution system?
Ans. Water is distributed in a distribution system through a network of pipes, pumps, and valves. Water is pumped from the source to a treatment plant, where it is treated and then distributed to consumers through a series of pipes.
3. How does well hydraulics work?
Ans. Well hydraulics is the study of the flow of water in and around wells. It involves understanding the behavior of water in aquifers, the interaction between the well and the surrounding aquifer, and the factors that affect the flow of water into and out of the well.
4. What factors determine the availability of water from different sources?
Ans. The availability of water from different sources is determined by factors such as the location and size of the source, the geology and hydrology of the area, the level of development and extraction of water, and the climate and rainfall patterns.
5. How can water supply be managed sustainably?
Ans. Water supply can be managed sustainably by implementing measures such as water conservation and efficiency practices, promoting rainwater harvesting and groundwater recharge, protecting water sources from pollution, and adopting integrated water resources management approaches.
14 videos|99 docs|98 tests
Download as PDF
Explore Courses for Civil Engineering (CE) exam

Top Courses for Civil Engineering (CE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Past Year Questions: Sources of Water Supply

,

Viva Questions

,

shortcuts and tricks

,

Semester Notes

,

practice quizzes

,

MCQs

,

Exam

,

Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

,

video lectures

,

Previous Year Questions with Solutions

,

Past Year Questions: Sources of Water Supply

,

Important questions

,

Past Year Questions: Sources of Water Supply

,

Free

,

Summary

,

Extra Questions

,

past year papers

,

pdf

,

Objective type Questions

,

Sample Paper

,

Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

,

Distribution System & Well Hydraulics | Environmental Engineering - Civil Engineering (CE)

,

study material

,

ppt

,

mock tests for examination

;