NEET Exam  >  NEET Notes  >  Physics Class 12  >  Toroid & Solenoid

Toroid & Solenoid | Physics Class 12 - NEET PDF Download

9. Toroid : It is on hollow circular tube have windings of conducting wire closely attached to each other circularly on it (as shown below)

Toroid & Solenoid | Physics Class 12 - NEET

for ideal Toroid d << R

Magnetic field in Toroid

Let N = Total No. of turns

Now from Ampere's circuital law

Toroid & Solenoid | Physics Class 12 - NEET   

B.2πR = μ0 iin = μ0 Ni       

⇒ B = Toroid & Solenoid | Physics Class 12 - NEET     

Toroid & Solenoid | Physics Class 12 - NEET

n = Toroid & Solenoid | Physics Class 12 - NEET = No of turns per unit length

so B = μ0 n i

What is Solenoid?

Let us consider a solenoid, such that its length is large as compared to its radius. Here, the wire is wound in the form of the helix with a very little gap between any two turns. Also, the wires are enameled, thus rendering them insulated from each other. As a result, each turn can be taken as a closed circular loop. The magnetic field thus generated is equivalent to that generated by a circular loop and the total magnetic field generated by the solenoid can be given as the vector sum of force generated by each such turn. The magnetic field lines generated inside a finite solenoid has been shown in the figure below.
Toroid & Solenoid | Physics Class 12 - NEET

We can see from the figure that the magnetic field inside the solenoid is uniform in nature and is along the axis of the solenoid. The field at the exterior at any point immediately to the solenoid is very weak and the field lines cannot be seen near the close vicinity. It is important to note that the field inside it is parallel to its axis at every position.


From the Ampere’s Law, the magnetic force produced by a solenoid can be given as,
Toroid & Solenoid | Physics Class 12 - NEET

Where n is the number of turns of the wire per unit length, I is the current flowing through the wire and the direction is given using the right-hand thumb rule.

10. Infinite Current Carrying sheet

Now from Ampere's loop

Toroid & Solenoid | Physics Class 12 - NEET

Toroid & Solenoid | Physics Class 12 - NEET

Toroid & Solenoid | Physics Class 12 - NEET 

Bl + 0 + Bl + 0 = μ l  
Toroid & Solenoid | Physics Class 12 - NEET

B = Toroid & Solenoid | Physics Class 12 - NEET

Ex.14 Three identical long solenoids P, Q and R are connected to each other as shown in figure. if the magnetic field at the center of P is 2.0 T, what would be the field at the centre of Q? Assume that the field due to any solenoid is confined within the volume of that solenoid only.

Sol. Toroid & Solenoid | Physics Class 12 - NEET

As the solenoids are identical, the currents in Q and R will be the same and will be half the current in P. The magnetic field within a solenoid is given by B = μ0 ni. Hence the field in Q will be equal to the field in R and will be half the field in P i.e., will be 1.0 T

11. Magnetic force on moving charge

When a charge q moves with velocity Toroid & Solenoid | Physics Class 12 - NEET, in a magnetic field Toroid & Solenoid | Physics Class 12 - NEET, then the magnetic force experienced by moving charge is given by following formula :

Toroid & Solenoid | Physics Class 12 - NEET Put q with sign. ...(9)

Toroid & Solenoid | Physics Class 12 - NEET : Instantaneous velocity

Toroid & Solenoid | Physics Class 12 - NEET : Magnetic field at that point.

11.1 DIFFERENCE BETWEEN MAGNETIC FORCE AND ELECTRIC FORCE

(1) Magentic force is always perpendicular to the field while electric force is collinear with the field.

(2) Magnetic force is velocity dependent, i.e., acts only when the charged particle is in motion while electric force (qE) is independent of the state of rest or motion of the charged particle.

(3) Magentic force does no work when the charged particle is displaced while the electric force does work in displacing the charged particle.

Note :

Toroid & Solenoid | Physics Class 12 - NEET

Therefore, Toroid & Solenoid | Physics Class 12 - NEET Therefore, power due to magnetic force on a charged particle is zero. (use the formula of power P = Toroid & Solenoid | Physics Class 12 - NEETfor its proof)

Since the Toroid & Solenoid | Physics Class 12 - NEET so work done by magnetic force is zero in every part of the motion. The magnetic force cannot increase or decrease the speed (or kinetic energy) of a charged particle. Its can only change the direction of velocity.

On a stationary charged particle, magnetic force is zero.

If Toroid & Solenoid | Physics Class 12 - NEET, then also magnetic force on charged particle is zero. It moves along a straight line if only magnetic field is acting.

Ex.15 A Charged particle of mass 5 mg and charge q = +2μC has velocity Toroid & Solenoid | Physics Class 12 - NEET. Find out the magnetic force on the charged particle and its acceleration at this instant due to magnetic field Toroid & Solenoid | Physics Class 12 - NEETToroid & Solenoid | Physics Class 12 - NEET and Toroid & Solenoid | Physics Class 12 - NEET are in m/s and Wb/m2 respectively.

Sol. Toroid & Solenoid | Physics Class 12 - NEET = 2 × 10-6 Toroid & Solenoid | Physics Class 12 - NEET

By Newton's Law Toroid & Solenoid | Physics Class 12 - NEET

=Toroid & Solenoid | Physics Class 12 - NEET

Ex.16 A charged particle has acceleration Toroid & Solenoid | Physics Class 12 - NEET in a magnetic field Toroid & Solenoid | Physics Class 12 - NEET. Find the value of x.

Sol. Toroid & Solenoid | Physics Class 12 - NEET Toroid & Solenoid | Physics Class 12 - NEET

Therefore, Toroid & Solenoid | Physics Class 12 - NEET

Therefore, Toroid & Solenoid | Physics Class 12 - NEET

Therefore, Toroid & Solenoid | Physics Class 12 - NEET = 0

⇒ - 6 + 2x = 0 ⇒ x = 3.

12. MOTION OF A CHARGED PARTICLE IN A UNIFORM MAGNETIC FIELD.

12.1 WHEN THE CHARGED PARTICLE IS GIVEN VELOCITY PERPENDICULAR TO THE FIELD

Let a particle of charged q and mass m is moving with a velocity v and enters at right angles to a uniform magnetic field Toroid & Solenoid | Physics Class 12 - NEET as shown in figure.

The force on the particle is qvB and this force will always act in a direction perpendicular to v. Hence, the particle will move on a circular path. If the radius of the path is r then

Toroid & Solenoid | Physics Class 12 - NEET

Toroid & Solenoid | Physics Class 12 - NEET or, r = Toroid & Solenoid | Physics Class 12 - NEET ...(10)

Thus, radius of the path is proportional to the momentum mv of the particle and inversely proportional to the magnitude of magnetic field.

Time period : The time period is the time taken by the charged particle to complete one rotation of the circular path which is given by,

T = Toroid & Solenoid | Physics Class 12 - NEET = Toroid & Solenoid | Physics Class 12 - NEET ...(11)

The time period is independent of the speed v.

Frequency : The frequency is number of revolution of charged particle in one second, which is given by,

Toroid & Solenoid | Physics Class 12 - NEET..(12)

and angular frequency = Toroid & Solenoid | Physics Class 12 - NEET

Ex 17. A proton (p), a - particle and deuteron (D) are moving in circular paths with same kinetic energies in the same magnetic field. Find the ratio of their radii and time periods. (Neglect interaction between particles).

Sol. R = Toroid & Solenoid | Physics Class 12 - NEET

Therefore, Rp : Ra : RD =Toroid & Solenoid | Physics Class 12 - NEET

= 1 : 1 : Toroid & Solenoid | Physics Class 12 - NEET

T = 2πm/qB

Therefore, Tp : Ta : TToroid & Solenoid | Physics Class 12 - NEET : Toroid & Solenoid | Physics Class 12 - NEET : Toroid & Solenoid | Physics Class 12 - NEET

= 1 : 2 : 2 Ans.

Ex.18 A positive charge particle of charge q, mass m enters into a uniform magnetic field with velocity v as shown in the figure. There is no magnetic field to the left of PQ. Find

 Toroid & Solenoid | Physics Class 12 - NEET

(i) time spent,

(ii) distance travelled in the magnetic field

(iii) impulse of magnetic force.

Sol. The particle will move in the field as shown. Angle subtended by the arc at the centre = 2q

(i) Time spent by the charge in magnetic field

wt = q ⇒ Toroid & Solenoid | Physics Class 12 - NEET ⇒ t = Toroid & Solenoid | Physics Class 12 - NEET

(ii) Distance travelled by the charge in magnetic field : 

= r (2θ) = Toroid & Solenoid | Physics Class 12 - NEET 
Toroid & Solenoid | Physics Class 12 - NEET

(iii) Impulse = change in momentum of the charge

= (-mv sin θ + mv cos θ Toroid & Solenoid | Physics Class 12 - NEET) - (mv sin θ Toroid & Solenoid | Physics Class 12 - NEET + mv cos θ ) = -2mv sinθToroid & Solenoid | Physics Class 12 - NEET

The document Toroid & Solenoid | Physics Class 12 - NEET is a part of the NEET Course Physics Class 12.
All you need of NEET at this link: NEET
97 videos|370 docs|104 tests

Top Courses for NEET

FAQs on Toroid & Solenoid - Physics Class 12 - NEET

1. What is a toroid and how does it differ from a solenoid?
Ans. A toroid is a donut-shaped object with a circular cross-section, while a solenoid is a cylindrical coil of wire. The main difference between them is in their shape and the way they are used. Toroids are often used in electronic transformers and inductors, while solenoids are commonly used in electromechanical devices such as valves and relays.
2. How does a toroid work as an inductor?
Ans. A toroid works as an inductor by storing energy in its magnetic field. When a current flows through the wire wound around the toroid, it creates a magnetic field that is concentrated within the toroid's core. This magnetic field stores energy, which can be released when the current is interrupted. The inductance of a toroid depends on factors such as the number of turns of wire and the permeability of the core material.
3. What are some applications of solenoids?
Ans. Solenoids have a wide range of applications due to their ability to convert electrical energy into mechanical motion. Some common uses of solenoids include door locks, automotive starter motors, vending machines, and electric valves. They are also used in various types of electromagnetic relays and actuators.
4. How does a solenoid create a magnetic field?
Ans. A solenoid creates a magnetic field when an electric current flows through the coil of wire. The wire is wound in a helical shape, and the current flowing in one direction creates a magnetic field around each turn of the coil. The magnetic fields of the individual turns align with each other, resulting in a stronger magnetic field in the center of the solenoid.
5. What are some advantages of using toroids and solenoids in electronic systems?
Ans. There are several advantages to using toroids and solenoids in electronic systems. - Toroids offer a high degree of magnetic coupling, making them efficient for use in transformers and inductors. - The donut shape of toroids allows for more compact and space-saving designs compared to other types of inductors. - Solenoids provide precise and controlled linear or rotational motion, making them suitable for various electromechanical applications. - Both toroids and solenoids can be designed to have high inductance values, allowing for effective energy storage and control in electronic circuits.
97 videos|370 docs|104 tests
Download as PDF
Explore Courses for NEET exam

Top Courses for NEET

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

MCQs

,

Extra Questions

,

Important questions

,

practice quizzes

,

Viva Questions

,

Toroid & Solenoid | Physics Class 12 - NEET

,

past year papers

,

Sample Paper

,

Toroid & Solenoid | Physics Class 12 - NEET

,

study material

,

Toroid & Solenoid | Physics Class 12 - NEET

,

Semester Notes

,

mock tests for examination

,

pdf

,

Previous Year Questions with Solutions

,

video lectures

,

ppt

,

Summary

,

Exam

,

Objective type Questions

,

shortcuts and tricks

,

Free

;