CTET & State TET Exam  >  CTET & State TET Notes  >  NCERT Textbooks (Class 6 to Class 12)  >  NCERT Textbook: Limits and Derivatives

NCERT Textbook: Limits and Derivatives | NCERT Textbooks (Class 6 to Class 12) - CTET & State TET PDF Download

Download, print and study this document offline
Please wait while the PDF view is loading
 Page 1


vWith the Calculus as a key, Mathematics can be successfully applied to the
explanation of the course of Nature – WHITEHEAD v
12.1 Introduction
This chapter is an introduction to Calculus. Calculus is that
branch of mathematics which mainly deals with the study
of change in the value of a function as the points in the
domain change. First, we give an intuitive idea of derivative
(without actually defining it). Then we give a naive definition
of limit and study some algebra of limits. Then we come
back to a definition of derivative and study some algebra
of derivatives. We also obtain derivatives of certain
standard functions.
12.2 Intuitive Idea of Derivatives
Physical experiments have confirmed that the body dropped
from a tall cliff covers a distance of 4.9t
2
 metres in t seconds,
i.e., distance s in metres covered by the body as a function of time t in seconds is given
by s = 4.9t
2
.
The adjoining Table 13.1 gives the distance travelled in metres at various intervals
of time in seconds of a body dropped from a tall cliff.
The objective is to find the veloctiy of the body at time t = 2 seconds from this
data. One way to approach this problem is to find the average velocity for various
intervals of time ending at t = 2 seconds and hope that these throw some light on the
velocity at t = 2 seconds.
Average velocity between t = t
1
 and t = t
2
 equals distance travelled between
 t = t
1
 and t = t
2  
seconds divided by  (t
2
 – t
1
). Hence the average velocity in the first
two seconds
12 Chapter
LIMITS AND DERIV A TIVES
Sir Issac Newton
(1642-1727)
2024-25
Page 2


vWith the Calculus as a key, Mathematics can be successfully applied to the
explanation of the course of Nature – WHITEHEAD v
12.1 Introduction
This chapter is an introduction to Calculus. Calculus is that
branch of mathematics which mainly deals with the study
of change in the value of a function as the points in the
domain change. First, we give an intuitive idea of derivative
(without actually defining it). Then we give a naive definition
of limit and study some algebra of limits. Then we come
back to a definition of derivative and study some algebra
of derivatives. We also obtain derivatives of certain
standard functions.
12.2 Intuitive Idea of Derivatives
Physical experiments have confirmed that the body dropped
from a tall cliff covers a distance of 4.9t
2
 metres in t seconds,
i.e., distance s in metres covered by the body as a function of time t in seconds is given
by s = 4.9t
2
.
The adjoining Table 13.1 gives the distance travelled in metres at various intervals
of time in seconds of a body dropped from a tall cliff.
The objective is to find the veloctiy of the body at time t = 2 seconds from this
data. One way to approach this problem is to find the average velocity for various
intervals of time ending at t = 2 seconds and hope that these throw some light on the
velocity at t = 2 seconds.
Average velocity between t = t
1
 and t = t
2
 equals distance travelled between
 t = t
1
 and t = t
2  
seconds divided by  (t
2
 – t
1
). Hence the average velocity in the first
two seconds
12 Chapter
LIMITS AND DERIV A TIVES
Sir Issac Newton
(1642-1727)
2024-25
218 MATHEMATICS
=
2 1
2 1
Distance travelled between 2 0
Time interval ( )
t and t
t t
= =
-
=
( )
( )
19.6 0
9.8 /
2 0
m
m s
s
-
=
-
.
Similarly, the average velocity between t = 1
 
and t = 2 is
( )
( )
19.6 – 4.9
2 1
m
s -
= 14.7 m/s
Likewise we compute the average velocitiy
between t = t
1
 and t = 2 for various t
1
. The following
Table 13.2 gives the average velocity (v), t = t
1
seconds and t = 2 seconds.
T able 12.2
t
1
0 1 1.5 1.8 1.9 1.95 1.99
v 9.8 14.7 17.15 18.62 19.11 19.355 19.551
From Table 12.2, we observe that the average velocity is gradually increasing.
As we make the time intervals ending at t = 2 smaller, we see that we get a better idea
of the velocity at t = 2. Hoping that nothing really dramatic happens between 1.99
seconds and 2 seconds, we conclude that the average velocity at t = 2 seconds is just
above 19.551m/s.
This conclusion is somewhat strengthened by the following set of computation.
Compute the average velocities for various time intervals starting at t = 2 seconds. As
before the average velocity v between t = 2 seconds and t = t
2
 seconds is
= 
2
2
Distance travelled between 2 seconds and seconds
2
t
t -
= 
2
2
Distance travelled in seconds  Distance travelled in 2 seconds
2
t
t
-
-
t s
0 0
1 4.9
1.5 11.025
1.8 15.876
1.9 17.689
1.95 18.63225
2 19.6
2.05 20.59225
2.1 21.609
2.2 23.716
2.5 30.625
3 44.1
4 78.4
T able 12.1
2024-25
Page 3


vWith the Calculus as a key, Mathematics can be successfully applied to the
explanation of the course of Nature – WHITEHEAD v
12.1 Introduction
This chapter is an introduction to Calculus. Calculus is that
branch of mathematics which mainly deals with the study
of change in the value of a function as the points in the
domain change. First, we give an intuitive idea of derivative
(without actually defining it). Then we give a naive definition
of limit and study some algebra of limits. Then we come
back to a definition of derivative and study some algebra
of derivatives. We also obtain derivatives of certain
standard functions.
12.2 Intuitive Idea of Derivatives
Physical experiments have confirmed that the body dropped
from a tall cliff covers a distance of 4.9t
2
 metres in t seconds,
i.e., distance s in metres covered by the body as a function of time t in seconds is given
by s = 4.9t
2
.
The adjoining Table 13.1 gives the distance travelled in metres at various intervals
of time in seconds of a body dropped from a tall cliff.
The objective is to find the veloctiy of the body at time t = 2 seconds from this
data. One way to approach this problem is to find the average velocity for various
intervals of time ending at t = 2 seconds and hope that these throw some light on the
velocity at t = 2 seconds.
Average velocity between t = t
1
 and t = t
2
 equals distance travelled between
 t = t
1
 and t = t
2  
seconds divided by  (t
2
 – t
1
). Hence the average velocity in the first
two seconds
12 Chapter
LIMITS AND DERIV A TIVES
Sir Issac Newton
(1642-1727)
2024-25
218 MATHEMATICS
=
2 1
2 1
Distance travelled between 2 0
Time interval ( )
t and t
t t
= =
-
=
( )
( )
19.6 0
9.8 /
2 0
m
m s
s
-
=
-
.
Similarly, the average velocity between t = 1
 
and t = 2 is
( )
( )
19.6 – 4.9
2 1
m
s -
= 14.7 m/s
Likewise we compute the average velocitiy
between t = t
1
 and t = 2 for various t
1
. The following
Table 13.2 gives the average velocity (v), t = t
1
seconds and t = 2 seconds.
T able 12.2
t
1
0 1 1.5 1.8 1.9 1.95 1.99
v 9.8 14.7 17.15 18.62 19.11 19.355 19.551
From Table 12.2, we observe that the average velocity is gradually increasing.
As we make the time intervals ending at t = 2 smaller, we see that we get a better idea
of the velocity at t = 2. Hoping that nothing really dramatic happens between 1.99
seconds and 2 seconds, we conclude that the average velocity at t = 2 seconds is just
above 19.551m/s.
This conclusion is somewhat strengthened by the following set of computation.
Compute the average velocities for various time intervals starting at t = 2 seconds. As
before the average velocity v between t = 2 seconds and t = t
2
 seconds is
= 
2
2
Distance travelled between 2 seconds and seconds
2
t
t -
= 
2
2
Distance travelled in seconds  Distance travelled in 2 seconds
2
t
t
-
-
t s
0 0
1 4.9
1.5 11.025
1.8 15.876
1.9 17.689
1.95 18.63225
2 19.6
2.05 20.59225
2.1 21.609
2.2 23.716
2.5 30.625
3 44.1
4 78.4
T able 12.1
2024-25
  LIMITS AND DERIVATIVES            219
= 
2
2
Distance travelled in seconds  19.6
2
t
t
-
-
The following Table 12.3 gives the average velocity v in metres per second
between t = 2 seconds and t
2
 seconds.
T able 12.3
t
2
4 3 2.5 2.2 2.1 2.05 2.01
v 29.4 24.5 22.05 20.58 20.09 19.845 19.649
Here again we note that if we take smaller time intervals starting at t = 2, we get
better idea of the velocity at t = 2.
In the first set of computations, what we have done is to find average velocities
in increasing time intervals ending at t = 2 and then hope that nothing dramatic happens
just before t = 2. In the second set of computations, we have found the average velocities
decreasing in time intervals ending at t = 2 and then hope that nothing dramatic happens
just after t = 2. Purely on the physical grounds, both these sequences of average
velocities must approach a common limit. We can safely conclude that the velocity of
the body at t = 2 is between 19.551m/s and 19.649 m/s. Technically, we say that the
instantaneous velocity at t = 2 is between 19.551 m/s and 19.649 m/s. As is
well-known, velocity is the rate of change of displacement. Hence what we have
accomplished is the following. From the given data of distance covered at various time
instants we have estimated the rate of
change of the distance at a given instant
of time. We say that the derivative of
the distance function s = 4.9t
2
 at t = 2
is between 19.551 and 19.649.
An alternate way of viewing this
limiting process is shown in Fig 12.1.
This is a plot of distance s of the body
from the top of the cliff versus the time
t elapsed. In the limit as the sequence
of time intervals h
1
, h
2
, ..., approaches
zero, the sequence of average velocities
approaches the same limit as does the
sequence of ratios
Fig 12.1
2024-25
Page 4


vWith the Calculus as a key, Mathematics can be successfully applied to the
explanation of the course of Nature – WHITEHEAD v
12.1 Introduction
This chapter is an introduction to Calculus. Calculus is that
branch of mathematics which mainly deals with the study
of change in the value of a function as the points in the
domain change. First, we give an intuitive idea of derivative
(without actually defining it). Then we give a naive definition
of limit and study some algebra of limits. Then we come
back to a definition of derivative and study some algebra
of derivatives. We also obtain derivatives of certain
standard functions.
12.2 Intuitive Idea of Derivatives
Physical experiments have confirmed that the body dropped
from a tall cliff covers a distance of 4.9t
2
 metres in t seconds,
i.e., distance s in metres covered by the body as a function of time t in seconds is given
by s = 4.9t
2
.
The adjoining Table 13.1 gives the distance travelled in metres at various intervals
of time in seconds of a body dropped from a tall cliff.
The objective is to find the veloctiy of the body at time t = 2 seconds from this
data. One way to approach this problem is to find the average velocity for various
intervals of time ending at t = 2 seconds and hope that these throw some light on the
velocity at t = 2 seconds.
Average velocity between t = t
1
 and t = t
2
 equals distance travelled between
 t = t
1
 and t = t
2  
seconds divided by  (t
2
 – t
1
). Hence the average velocity in the first
two seconds
12 Chapter
LIMITS AND DERIV A TIVES
Sir Issac Newton
(1642-1727)
2024-25
218 MATHEMATICS
=
2 1
2 1
Distance travelled between 2 0
Time interval ( )
t and t
t t
= =
-
=
( )
( )
19.6 0
9.8 /
2 0
m
m s
s
-
=
-
.
Similarly, the average velocity between t = 1
 
and t = 2 is
( )
( )
19.6 – 4.9
2 1
m
s -
= 14.7 m/s
Likewise we compute the average velocitiy
between t = t
1
 and t = 2 for various t
1
. The following
Table 13.2 gives the average velocity (v), t = t
1
seconds and t = 2 seconds.
T able 12.2
t
1
0 1 1.5 1.8 1.9 1.95 1.99
v 9.8 14.7 17.15 18.62 19.11 19.355 19.551
From Table 12.2, we observe that the average velocity is gradually increasing.
As we make the time intervals ending at t = 2 smaller, we see that we get a better idea
of the velocity at t = 2. Hoping that nothing really dramatic happens between 1.99
seconds and 2 seconds, we conclude that the average velocity at t = 2 seconds is just
above 19.551m/s.
This conclusion is somewhat strengthened by the following set of computation.
Compute the average velocities for various time intervals starting at t = 2 seconds. As
before the average velocity v between t = 2 seconds and t = t
2
 seconds is
= 
2
2
Distance travelled between 2 seconds and seconds
2
t
t -
= 
2
2
Distance travelled in seconds  Distance travelled in 2 seconds
2
t
t
-
-
t s
0 0
1 4.9
1.5 11.025
1.8 15.876
1.9 17.689
1.95 18.63225
2 19.6
2.05 20.59225
2.1 21.609
2.2 23.716
2.5 30.625
3 44.1
4 78.4
T able 12.1
2024-25
  LIMITS AND DERIVATIVES            219
= 
2
2
Distance travelled in seconds  19.6
2
t
t
-
-
The following Table 12.3 gives the average velocity v in metres per second
between t = 2 seconds and t
2
 seconds.
T able 12.3
t
2
4 3 2.5 2.2 2.1 2.05 2.01
v 29.4 24.5 22.05 20.58 20.09 19.845 19.649
Here again we note that if we take smaller time intervals starting at t = 2, we get
better idea of the velocity at t = 2.
In the first set of computations, what we have done is to find average velocities
in increasing time intervals ending at t = 2 and then hope that nothing dramatic happens
just before t = 2. In the second set of computations, we have found the average velocities
decreasing in time intervals ending at t = 2 and then hope that nothing dramatic happens
just after t = 2. Purely on the physical grounds, both these sequences of average
velocities must approach a common limit. We can safely conclude that the velocity of
the body at t = 2 is between 19.551m/s and 19.649 m/s. Technically, we say that the
instantaneous velocity at t = 2 is between 19.551 m/s and 19.649 m/s. As is
well-known, velocity is the rate of change of displacement. Hence what we have
accomplished is the following. From the given data of distance covered at various time
instants we have estimated the rate of
change of the distance at a given instant
of time. We say that the derivative of
the distance function s = 4.9t
2
 at t = 2
is between 19.551 and 19.649.
An alternate way of viewing this
limiting process is shown in Fig 12.1.
This is a plot of distance s of the body
from the top of the cliff versus the time
t elapsed. In the limit as the sequence
of time intervals h
1
, h
2
, ..., approaches
zero, the sequence of average velocities
approaches the same limit as does the
sequence of ratios
Fig 12.1
2024-25
220 MATHEMATICS
3 3 1 1 2 2
1 2 3
C B CB C B
, ,
AC AC AC
, ...
where C
1
B
1
 = s
1
 – s
0
 is the distance travelled by the body in the time interval h
1
 = AC
1
,
etc. From the Fig 12.1 it is safe to conclude that this latter sequence approaches the
slope of the tangent to the curve at point A. In other words, the instantaneous velocity
v(t) of a body at time t = 2 is equal to the slope of the tangent of the curve s = 4.9t
2
 at
t = 2.
12.3 Limits
The above discussion clearly points towards the fact that we need to understand limit-
ing process in greater clarity. We study a few illustrative examples to gain some famil-
iarity with the concept of limits.
Consider the function f(x) = x
2
. Observe that as x takes values very close to 0,
the value of f(x) also moves towards 0 (See Fig 2.10 Chapter 2). We say
( )
0
lim 0
x
f x
?
=
(to be read as limit of f (x) as x tends to zero equals zero).  The limit of f (x) as x tends
to zero is to be thought of as the value f (x) should assume at x = 0.
In general as x ? a, f (x) ? l, then l is called limit of the function f (x) which is
symbolically written as 
( ) lim
x a
f x l
?
=
.
Consider the following function g(x) = |x|, x 
?
0. Observe that g(0) is not defined.
Computing the value of g(x) for values of x very
near to 0, we see that the value of g(x) moves
towards 0. So, 
0
lim
x?
 g(x) = 0. This is intuitively
clear from the graph of y = |x| for x 
?
0.
(See Fig 2.13, Chapter 2).
Consider the following function.
( )
2
4
, 2
2
x
h x x
x
-
= ?
-
.
Compute the value of h(x) for values  of
x very near to 2 (but not at 2). Convince yourself
that all these values are near to 4. This is
somewhat strengthened by considering the graph
of the function y = h(x) given here (Fig 12.2).
Fig 12.2
2024-25
Page 5


vWith the Calculus as a key, Mathematics can be successfully applied to the
explanation of the course of Nature – WHITEHEAD v
12.1 Introduction
This chapter is an introduction to Calculus. Calculus is that
branch of mathematics which mainly deals with the study
of change in the value of a function as the points in the
domain change. First, we give an intuitive idea of derivative
(without actually defining it). Then we give a naive definition
of limit and study some algebra of limits. Then we come
back to a definition of derivative and study some algebra
of derivatives. We also obtain derivatives of certain
standard functions.
12.2 Intuitive Idea of Derivatives
Physical experiments have confirmed that the body dropped
from a tall cliff covers a distance of 4.9t
2
 metres in t seconds,
i.e., distance s in metres covered by the body as a function of time t in seconds is given
by s = 4.9t
2
.
The adjoining Table 13.1 gives the distance travelled in metres at various intervals
of time in seconds of a body dropped from a tall cliff.
The objective is to find the veloctiy of the body at time t = 2 seconds from this
data. One way to approach this problem is to find the average velocity for various
intervals of time ending at t = 2 seconds and hope that these throw some light on the
velocity at t = 2 seconds.
Average velocity between t = t
1
 and t = t
2
 equals distance travelled between
 t = t
1
 and t = t
2  
seconds divided by  (t
2
 – t
1
). Hence the average velocity in the first
two seconds
12 Chapter
LIMITS AND DERIV A TIVES
Sir Issac Newton
(1642-1727)
2024-25
218 MATHEMATICS
=
2 1
2 1
Distance travelled between 2 0
Time interval ( )
t and t
t t
= =
-
=
( )
( )
19.6 0
9.8 /
2 0
m
m s
s
-
=
-
.
Similarly, the average velocity between t = 1
 
and t = 2 is
( )
( )
19.6 – 4.9
2 1
m
s -
= 14.7 m/s
Likewise we compute the average velocitiy
between t = t
1
 and t = 2 for various t
1
. The following
Table 13.2 gives the average velocity (v), t = t
1
seconds and t = 2 seconds.
T able 12.2
t
1
0 1 1.5 1.8 1.9 1.95 1.99
v 9.8 14.7 17.15 18.62 19.11 19.355 19.551
From Table 12.2, we observe that the average velocity is gradually increasing.
As we make the time intervals ending at t = 2 smaller, we see that we get a better idea
of the velocity at t = 2. Hoping that nothing really dramatic happens between 1.99
seconds and 2 seconds, we conclude that the average velocity at t = 2 seconds is just
above 19.551m/s.
This conclusion is somewhat strengthened by the following set of computation.
Compute the average velocities for various time intervals starting at t = 2 seconds. As
before the average velocity v between t = 2 seconds and t = t
2
 seconds is
= 
2
2
Distance travelled between 2 seconds and seconds
2
t
t -
= 
2
2
Distance travelled in seconds  Distance travelled in 2 seconds
2
t
t
-
-
t s
0 0
1 4.9
1.5 11.025
1.8 15.876
1.9 17.689
1.95 18.63225
2 19.6
2.05 20.59225
2.1 21.609
2.2 23.716
2.5 30.625
3 44.1
4 78.4
T able 12.1
2024-25
  LIMITS AND DERIVATIVES            219
= 
2
2
Distance travelled in seconds  19.6
2
t
t
-
-
The following Table 12.3 gives the average velocity v in metres per second
between t = 2 seconds and t
2
 seconds.
T able 12.3
t
2
4 3 2.5 2.2 2.1 2.05 2.01
v 29.4 24.5 22.05 20.58 20.09 19.845 19.649
Here again we note that if we take smaller time intervals starting at t = 2, we get
better idea of the velocity at t = 2.
In the first set of computations, what we have done is to find average velocities
in increasing time intervals ending at t = 2 and then hope that nothing dramatic happens
just before t = 2. In the second set of computations, we have found the average velocities
decreasing in time intervals ending at t = 2 and then hope that nothing dramatic happens
just after t = 2. Purely on the physical grounds, both these sequences of average
velocities must approach a common limit. We can safely conclude that the velocity of
the body at t = 2 is between 19.551m/s and 19.649 m/s. Technically, we say that the
instantaneous velocity at t = 2 is between 19.551 m/s and 19.649 m/s. As is
well-known, velocity is the rate of change of displacement. Hence what we have
accomplished is the following. From the given data of distance covered at various time
instants we have estimated the rate of
change of the distance at a given instant
of time. We say that the derivative of
the distance function s = 4.9t
2
 at t = 2
is between 19.551 and 19.649.
An alternate way of viewing this
limiting process is shown in Fig 12.1.
This is a plot of distance s of the body
from the top of the cliff versus the time
t elapsed. In the limit as the sequence
of time intervals h
1
, h
2
, ..., approaches
zero, the sequence of average velocities
approaches the same limit as does the
sequence of ratios
Fig 12.1
2024-25
220 MATHEMATICS
3 3 1 1 2 2
1 2 3
C B CB C B
, ,
AC AC AC
, ...
where C
1
B
1
 = s
1
 – s
0
 is the distance travelled by the body in the time interval h
1
 = AC
1
,
etc. From the Fig 12.1 it is safe to conclude that this latter sequence approaches the
slope of the tangent to the curve at point A. In other words, the instantaneous velocity
v(t) of a body at time t = 2 is equal to the slope of the tangent of the curve s = 4.9t
2
 at
t = 2.
12.3 Limits
The above discussion clearly points towards the fact that we need to understand limit-
ing process in greater clarity. We study a few illustrative examples to gain some famil-
iarity with the concept of limits.
Consider the function f(x) = x
2
. Observe that as x takes values very close to 0,
the value of f(x) also moves towards 0 (See Fig 2.10 Chapter 2). We say
( )
0
lim 0
x
f x
?
=
(to be read as limit of f (x) as x tends to zero equals zero).  The limit of f (x) as x tends
to zero is to be thought of as the value f (x) should assume at x = 0.
In general as x ? a, f (x) ? l, then l is called limit of the function f (x) which is
symbolically written as 
( ) lim
x a
f x l
?
=
.
Consider the following function g(x) = |x|, x 
?
0. Observe that g(0) is not defined.
Computing the value of g(x) for values of x very
near to 0, we see that the value of g(x) moves
towards 0. So, 
0
lim
x?
 g(x) = 0. This is intuitively
clear from the graph of y = |x| for x 
?
0.
(See Fig 2.13, Chapter 2).
Consider the following function.
( )
2
4
, 2
2
x
h x x
x
-
= ?
-
.
Compute the value of h(x) for values  of
x very near to 2 (but not at 2). Convince yourself
that all these values are near to 4. This is
somewhat strengthened by considering the graph
of the function y = h(x) given here (Fig 12.2).
Fig 12.2
2024-25
  LIMITS AND DERIVATIVES            221
In all these illustrations the value which the function should assume at a given
point x = a did not really depend on how is x tending to a. Note that there are essentially
two ways x could approach a number a  either from left or from right, i.e., all the
values of x near a could be less than a or could be greater than a. This naturally leads
to two limits – the right hand limit and the left hand limit. Right hand limit of a
function f(x) is that value of f(x) which is dictated by the values of f(x) when x tends
to a from the right. Similarly, the left hand limit. To illustrate this, consider the function
( )
1, 0
2, 0
x
f x
x
= ?
=
?
>
?
Graph of this function is shown in the Fig 12.3. It is
clear that the value of f at 0 dictated by values of f(x) with
x = 0 equals 1, i.e., the left hand limit of f (x) at 0 is
0
lim ( ) 1
x
f x
?
=
.
Similarly, the value of f at 0 dictated by values of
f (x) with x > 0 equals 2, i.e., the right hand limit of f (x)
at 0 is
0
lim ( ) 2
x
f x
+
?
=
.
In this case the right and left hand limits are different, and hence we say that the
limit of f (x) as x tends to zero does not exist (even though the function is defined at 0).
Summary
  We say 
lim
x a ?
–
 f(x) is the expected value of  f at x = a given the values of f near
x to the left of a. This value is called the left hand limit of f at a.
We say 
lim ( )
x a
f x
+
?
 is the expected value of f at x = a given the values of
f near x to the right of a. This value is called the right hand limit of f(x) at a.
If the right and left hand limits coincide, we call that common value as the limit
of f(x) at x = a and denote it by 
lim
x a ?
 f(x).
Illustration 1 Consider the function f(x) = x + 10. We want to find the limit of this
function at x = 5. Let us compute the value of the function f(x) for x very near to 5.
Some   of the points near and to the left of 5 are 4.9, 4.95, 4.99, 4.995. . ., etc. Values
of the function at these points are tabulated below. Similarly, the real number 5.001,
Fig 12.3
2024-25
Read More
3 videos|687 docs|659 tests

Top Courses for CTET & State TET

FAQs on NCERT Textbook: Limits and Derivatives - NCERT Textbooks (Class 6 to Class 12) - CTET & State TET

1. What is the concept of limits in calculus?
Ans. In calculus, the concept of limits refers to the value that a function or sequence approaches as the input or index approaches a certain point. It helps in determining the behavior of functions as they approach specific values or infinity.
2. How is the limit of a function calculated?
Ans. The limit of a function can be calculated by substituting the given value or approaching the value from both sides (left and right) and observing the behavior of the function. If the function approaches a specific value as the input approaches the given point, then that value is the limit.
3. What is the significance of limits in calculus?
Ans. Limits are significant in calculus as they allow us to understand and analyze the behavior of functions, even when there are discontinuities or points of undefined values. They help in determining the existence of limits, evaluating derivatives, and analyzing the behavior of functions near specific points.
4. Can limits help determine the continuity of a function?
Ans. Yes, limits play a crucial role in determining the continuity of a function. If the limit of a function exists at a point and is equal to the value of the function at that point, then the function is continuous at that point. However, if the limit does not exist or is not equal to the value of the function, then the function is discontinuous at that point.
5. How are derivatives related to limits?
Ans. Derivatives are closely related to limits in calculus. The derivative of a function at a point can be defined as the limit of the average rate of change of the function as the interval approaches zero. It represents the instantaneous rate of change of the function at a specific point. The concept of limits is fundamental in the calculation and understanding of derivatives.
3 videos|687 docs|659 tests
Download as PDF
Explore Courses for CTET & State TET exam

Top Courses for CTET & State TET

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Important questions

,

Semester Notes

,

Free

,

video lectures

,

shortcuts and tricks

,

NCERT Textbook: Limits and Derivatives | NCERT Textbooks (Class 6 to Class 12) - CTET & State TET

,

MCQs

,

past year papers

,

NCERT Textbook: Limits and Derivatives | NCERT Textbooks (Class 6 to Class 12) - CTET & State TET

,

Objective type Questions

,

Previous Year Questions with Solutions

,

Extra Questions

,

ppt

,

pdf

,

study material

,

practice quizzes

,

Viva Questions

,

Exam

,

mock tests for examination

,

NCERT Textbook: Limits and Derivatives | NCERT Textbooks (Class 6 to Class 12) - CTET & State TET

,

Sample Paper

,

Summary

;