Chemical Engineering Exam  >  Chemical Engineering Notes  >  Mass Transfer  >  Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions

Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering PDF Download

2.2 STEADY STATE MOLECULAR DIFFUSION IN FLUIDS UNDER STAGNANT AND LAMINAR FLOW CONDITIONS 
2.2.1 Steady state diffusion through a constant area 
Steady state diffusion through a stagnant gas film 
Assume steady state diffusion in the Z direction without any chemical reaction in a binary gaseous mixture of species A and B. For one dimensional diffusion of species A, the Equation of molar flux can be written as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                               (2.11)
Separating the variables in Equation (2.11), it can be expressed as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                          (2.12)
For the gaseous mixture, at constant pressure and temperature C and DAB are constant, independent of position and composition. Also all the molar fluxes are constant in Equation (2.12). Therefore the Equation (2.12) can be integrated between two boundary conditions as follows:
at          Z = Z1,             yA = yA1
at          Z = Z2,            yA = yA2
where 1 indicates the start of the diffusion path and 2 indicates the end of the diffusion path. After integration with the above boundary conditions the Equation for diffusion for the said condition can be expressed as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering         (2.13) 

For steady state one dimensional diffusion of A through non-diffusing B, NB = 0 and NA = constant. Therefore NA /(NA + N) =1 . Hence Equation (2.13) becomes
  Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                           (2.14)

Since for an ideal gas Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering and for mixture of ideal gases   Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering , the Equation (2.14) can be expressed in terms of partial pressures as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                (2.15)
Where P is the total pressure and pA1 and pA2 are the partial pressures of A at point 1 and 2 respectively. For diffusion under turbulent conditions, the flux is usually calculated based on linear driving force. For this purpose the Equation (2.13) can be manipulated to rewrite it in terms of a linear driving force. Since for the binary gas mixture of total pressure P, P-A2 = PB2 ; P-PA1 = PB1 ; PA1 - PA2 = PB2 - PB1 Then the Equation (2.15) can be written as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                  (2.16)
Or
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                        (2.17)
Where pB,M is called logarithmic mean partial pressure of species B which is defined as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                                       (2.18)
A schematic concentration profile for diffusion A through stagnant B is shown in Figure 2.1. The component A diffuses by concentration gradient, Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering . Here flux is inversely proportional to the distance through which diffusion occurs and the concentration of the stagnant gas ( pB,M ) because with increase in Z and pB,M , resistance increases and flux decreases. 
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering
Figure 2.1: Partial pressure distribution of A in non-diffusing B

2.2.2 Steady state equimolar counter diffusion: 
This is the case for the diffusion of two ideal gases, where an equal number of moles of the gases diffusing counter-current to each other. In this case NB = -NA = constant and NA+ NB = 0. The molar flux Equation (Equation (2.11)) at steady state can then be written as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                        (2.19)
Integrating the Equation (2.19) with the boundary conditions: at Z = Z1, yA = yA1; at Z = Z2 yA = yA2, the Equation of molar diffusion for steady-state equimolar counter diffusion can be represented as
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                      (2.20)
It may be noted here also that molar latent heats of vaporization of A and B are equal. So, Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering where, Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering  are molar latent heats of vaporization of A and B, respectively. The concentration profile in terms of partial pressure is shown in Figure 2.2.
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering
Figure 2.2: Equimolar counter diffusion of A and B: Partial pressure distribution with position 

2.2.3 Non-equimolar counter diffusion
In some practical cases, A and B molecules diffuse in opposite directions at different molar velocities [1]. Let carbon monoxide is generated from the reaction between hot char and oxygen. The stoichiometry is as follows:
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                      (2.21)
When one mole oxygen molecule diffuses towards char, two moles carbon monoxide molecules diffuse in opposite direction. Here, NA = -NB / 2 and molar latent heats of vaporization are not equal. Hence,
Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering                                          (2.22

The document Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering is a part of the Chemical Engineering Course Mass Transfer.
All you need of Chemical Engineering at this link: Chemical Engineering
29 videos|45 docs|44 tests

FAQs on Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions - Mass Transfer - Chemical Engineering

1. What is molecular diffusion in fluids?
Ans. Molecular diffusion in fluids refers to the process by which molecules move from an area of high concentration to an area of low concentration due to random thermal motion. It is a fundamental mechanism for the transport of molecules in various fluid systems.
2. How does molecular diffusion differ under stagnant and laminar flow conditions?
Ans. Under stagnant flow conditions, molecular diffusion occurs solely due to the random motion of molecules. On the other hand, under laminar flow conditions, molecular diffusion is enhanced by the bulk flow of the fluid, leading to a faster rate of diffusion.
3. What factors affect the rate of molecular diffusion in fluids?
Ans. The rate of molecular diffusion in fluids is influenced by several factors, including the concentration gradient, temperature, size and shape of the molecules, viscosity of the fluid, and the presence of any barriers or obstacles that may hinder the diffusion process.
4. How can the rate of molecular diffusion be quantified in fluid systems?
Ans. The rate of molecular diffusion can be quantified using Fick's law of diffusion, which states that the rate of diffusion is directly proportional to the concentration gradient and the diffusion coefficient of the molecules, while inversely proportional to the distance over which diffusion occurs.
5. What applications does the understanding of molecular diffusion have in chemical engineering?
Ans. The understanding of molecular diffusion is crucial in various chemical engineering processes, such as mass transfer in separation processes (e.g., distillation, absorption), diffusion-controlled reactions, and the design of membranes for filtration and separation. By studying and manipulating molecular diffusion, engineers can optimize these processes for efficient and cost-effective operations.
29 videos|45 docs|44 tests
Download as PDF
Explore Courses for Chemical Engineering exam
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Sample Paper

,

shortcuts and tricks

,

pdf

,

MCQs

,

Semester Notes

,

video lectures

,

practice quizzes

,

Summary

,

Exam

,

Viva Questions

,

Previous Year Questions with Solutions

,

Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering

,

Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering

,

mock tests for examination

,

Steady State Molecular Diffusion In Fluids Under Stagnant And Laminar Flow Conditions | Mass Transfer - Chemical Engineering

,

Important questions

,

Extra Questions

,

Objective type Questions

,

ppt

,

past year papers

,

Free

,

study material

;