UPSC Exam  >  UPSC Notes  >  Science & Technology for UPSC CSE  >  Physics General

Physics General | Science & Technology for UPSC CSE PDF Download

Physics General

  • A body is said to be moving with a uniform acceleration when its velocity changes at a uniform rate.
  • Acceleration is defined as the rate of change of velocity with time. Uniform acceleration acting on a body means that a continuous external force is acting on the body.
  • If the same weight of stones and paper are falling freely on the ground, the stones will reach the ground earlier than the paper. It is because of the friction of air that slows down the piece of paper. But, if the same experiment is performed in absence of air or, in vacuum both the bodies would reach the ground at the same time.
  • When a moving train stops suddenly, a man tends to fall forward; or, when a train at rest moves suddenly a man tends to fall backward. A dirty carpet can be cleaned by beating. The above all examples are in accordance with Newton’s First Law of Motion, which states that a body continues in its state of rest or uniform motion unless compelled by some external force to act otherwise.
  • The definition and derivation of Force comes from the Newton's Second Law of Motion.
  • Launching of rocket vehicles and jet planes follow the Newton’s Third Law of Motion.
  • One gram weight is equal to 980 dynes.
  • In C.G.S. (Centi-Gram-Second) system, the unit of Force is Dyne and in S.I. or MKS (Metre-Kilo-Second) system, the Newton.
  • If a body is allowed to fall from the window of a moving train, the body will fall on the ground after following a parabolic path.
  • A hunter should aim his gun to hit the target a little higher than target. Because the bullet moves on a parabolic path. Similarly, projectile has the parabolic path.
  • Archimedes’ Principle: When a body is immersed partly or completely in a fluid (liquid or gas), it experiences an upward buoyant force which is equal to the weight of the fluid displaced by it.
  • The principle finds application in the floatation of ship, Iceberg, Submarines, Whales or a bucket immersed in water, rise of balloon in air, etc.
  • If a piece of ice is in a cylinder containing water, and ice melts completely, the level of water remains unchanged (According to Archimedes’ Principle).
  • Hydrometer is an instrument for measuring relative density of liquids. The deeper the hydrometer floats in the liquid, the smaller is the relative density of the liquid. Density of a substance is the mass of a unit volume of that substance.

Relative Density of a substance =

Physics General | Science & Technology for UPSC CSE

  • Kinematics is the branch of mechanics, which is concerned with the phenomenon of motion without reference to mass or force.
  • Dynamics is the branch of mechanics which deals with the description of motion in terms of force.
  • Brownian movement is the random motion of small particles in a fluid. This irregular motion of particles arises from the thermal motion of the molecules of material in which the particles are present.
  • A Scalar is a quantity that has only magnitude. Examples—mass, time, density, temperature, etc.
  • A vector is a quantity that has magnitude as well as direction. Examples—linear displacement, linear velocity, force, etc.
  • A bicycle brake, see-saw, crow-bar, scissors, etc. work on the principle of first class lever (fulcrum in between the work load and effort).
  • Nut cracker, wheel barrow, mango cutter, bar of a boat, etc. work on the principle of lever of second class (load in between the fulcrum and effort and the load is closer to fulcrum than the effort).
  • Firetong, forearm of a person holding a load, use of knife, etc. are the examples of lever of third class (effort in between fulcrum and load and the effort is closer to the fulcrum than the load).
  • Common balance works on the principle of equality of moments of the forces, because the masses placed in the pans are subject to pulls of gravity. When these forces are equal, as indicated by the horizontal beam, the masses themselves must be equal.
  • A body moving in circular path is due to centripetal force. Centripetal force is the necessary radial force to keep the body moving in its circular path.
  • When a bucket containing water ‘loops a loop’ water does not fall down when it is at the highest point, because its weight is supported by centrifugal force. Centrifugal (flying from the centre) force is the outward force acting on a body rotating in a circle, round a central point.
  • A cyclist moving on circular path bends inward to avoid excessive centrifugal force.
  • Newton’s law of gravitation is universal and it states that every particle in the universe attracts every other particle with a force which is directly proportional to the product of the masses of the particle.
  • A man inside the lift feels— heavy, when lift is going up ; light, when lift is coming down ; weightless, when lift is falling freely.
  • Time period of a simple pendulum T = 2π √//g is an expression for simple harmonic motion.
  • A body is said to move in a simple harmonic motion when it oscillates along a line about a central point.
  • Length of a second’s pendulum is approximately 100 cm.
  • A pendulum vibrating in an evacuated chamber will oscillate forever without change in frequency and amplitude, because the force of friction will be Zero in an evacuated chamber.

Physics General | Science & Technology for UPSC CSE

  • As shown in the figure above, water squirts horizontally out of two small holes in the side of cylinder and the two streams strike the ground at the same point. If the hole is at a height h above the ground and the level of water stands at height H above the ground, then the height of P would be H-h.
  • Two Ping-pong balls are suspended as shown in the figure below.

  Physics General | Science & Technology for UPSC CSE

A stream of air is directed in the space between them. The balls will come closer.

  • The area of the shaded portion in the given velocity—time graph for an object gives its distance moved during acceleration.

Physics General | Science & Technology for UPSC CSE

As from the graph, the velocity is changing for a certain period of time after which the velocity is constant. The rate of change of velocity is acceleration.

Velocity *Time = distance (displacement).
Hence, the area of the shaded portion gives the distance travelled during acceleration.

Physics General | Science & Technology for UPSC CSE

  • The diagram shows an experiment done in a laboratory on the earth. With the weight as shown the system is in equilibrium when the angle between the strings is 90o. If the arrangement were set up on the surface of the moon where the gravitational attraction is about one-sixth of earth value, then the lead would remain exactly as on earth.
  • Two weights W1 and W2 are suspended from the ends of a light string passing over a smooth fixed pulley. If the pulley is pulled up at an acceleration g, then the tension in the string will be

  Physics General | Science & Technology for UPSC CSE

  • A vessel containing water is given a constant acceleration ‘a’ towards the right along a straight horizontal path. The following figure will represent the surface of the liquid

Physics General | Science & Technology for UPSC CSE

  • Vessels A and B have the same base area but different shapes. Both are filled with water upto the same height. The thrust on the base will be equal in both. 

Physics General | Science & Technology for UPSC CSE

Because, Thrust = Pressure/Area or, Thrust = height *density *g/Area; and since the factors are equal for both the vessels, the thrust is same. 

  • Hydraulic machines like Hydraulic press, Hydraulic brake and Hydraulic jack are devices that are based on Pascal’s Law.

Pascal’s law states that when pressure is applied to an enclosed liquid or gas, it is transmitted equally in all directions.

  • Elasticity : The property of a body or material of resuming its original form and dimensions when the forces acting upon it are removed. If the forces are sufficiently large for the deformation to cause a break in the molecular structure  of the body or, material, it loses its elasticity and the elastic limit is said to have reached. 
  • Hook’s law applies only within the elastic limit.
  • For an elastic body, the ratio of the stress to strain produced is known as Young’s modulus of elasticity.
  • Small liquid drops is due to the fact that liquid tends to have minimum surface area due to surface tension. Surface Tension :  An open surface of a liquid is under a state of tension, causing a tendency for the portions of the surface to separate from each other. The tension is an effect of the forces of attraction existing between the molecules of a liquid. A surface tension exists in any external surface of a liquid.
  • Surface tension of water is greater than that of mercury.
  • Surface tension of liquid is reduced by dissolving substances in the liquid or, by increase in temperature.
  • Soap makes the water easier to wash clothes because it decreases its surface tension.
  • Viscosity is the resistance in a liquid to flow. It may be called fluid friction. Stronger the inter molecular forces, higher is the viscosity. When the temperature is raised the viscosity of liquid decreases. This is because increase in temperature increases the average kinetic energy of molecules which overcomes the attractive forces between them.
  • According to Bernoulie’s Principle when the speed of the fluid (liquid or gas) in a pipe line increases, the pressure decreases and conversely when the speed of the fluid decreases, the pressure increases.
  • Applications of Bernoulie’s Principle

(i) Filter Pump or Aspirator, (ii) Atomizer or Sprayer, (iii) The Bunsen Burner, (iv) Lifting a disc (v) Magus effect (vi) Streamlining, (vii) Lift on an aircraft wing, etc.

  • Two cars passing each other at high speed, are in danger of side swiping because decrease in air pressure in the space between them (Bernoulie’s Principle).
Facts to be Remembered
  • An e.m.f. can be induced between the two ends of a straight copper wire when it is moved through a uniform magnetic field.
  • The setting sun appears higher in the sky than it really is.
  • The intensity of light at a distance r from the axis of long cylindrical source is inversely proportional to r.
  • No net force acts on a rectangular coil carrying a steady current when suspended freely in a uniform magnetic field.
  • Two identical metallic spheres of exactly equal masses are taken. One is given a positive charge Q coulombs and the other an equal negative charge. Their masses after charging are different.
  • There is no change in the energy of a charged particle moving in a magnetic field although a magnetic force is acting on it.
  • A beam of white light passing through a hollow prism gives no spectrum.
  • When a gas expands, its internal energy decreases.
  • The mechanical equivalent of heat remains always constant.
  • The quantity of heat flowing through a conductor is proportional to its cross-sectional area.
  • A convex lens acts as a magnifier when the object forms an image which is virtual.
  • The total capacity of four equal condensers will be maximum when they are connected all in parallel.
  • While using Wheatstone Bridge to determine the resistance of a galvanometer, readings should be taken when on pressing the galvanometer key, the deflection remains constant.
  • Heating effect per second of a current flowing through a conductor of resistance R when a voltage V is applied across it for t seconds is V2/R.
  • A transformer converts high voltage into low voltage and vice-versa.
  • The tangent galvanometer is called so because it works on the principle of Tangent Law.
  • Power consumed by an electrical appliance decreases with its impedance.
  • Power of a lens is proportional to 1/focal length.
  • The bob of a simple pendulum executes a SHM when its amplitude is small.
  • Volume is scalar.
  • Surface is both scalar and vector.
  • When the velocity of a body increases momentum increases.
  • Lenses are combined in contact mainly to reduce chromatic aberration.
  • The unit cube of a material will offer its specific resistance when connected through opposite surfaces.
The document Physics General | Science & Technology for UPSC CSE is a part of the UPSC Course Science & Technology for UPSC CSE.
All you need of UPSC at this link: UPSC
146 videos|358 docs|249 tests

Top Courses for UPSC

FAQs on Physics General - Science & Technology for UPSC CSE

1. What is physics?
Ans. Physics is a branch of science that deals with the study of matter, energy, and the interactions between them. It seeks to understand the fundamental principles that govern the behavior of the universe, from the smallest particles to the largest celestial bodies.
2. How is physics related to everyday life?
Ans. Physics has numerous applications in our everyday lives. It helps us understand how objects move, why the sky is blue, how electricity works, and much more. From the technology we use to the natural phenomena we observe, physics plays a crucial role in explaining and shaping our world.
3. What are the main branches of physics?
Ans. Physics is divided into several branches, each focusing on a specific area of study. Some of the main branches include classical mechanics (study of motion and forces), thermodynamics (study of heat and energy transfer), electromagnetism (study of electricity and magnetism), optics (study of light), and quantum mechanics (study of particles and their interactions).
4. How does physics contribute to technological advancements?
Ans. Physics is at the core of technological advancements. Many modern technologies, such as smartphones, computers, and medical imaging devices, rely on principles of physics. The understanding of physics allows scientists and engineers to develop and improve these technologies, making our lives more convenient and efficient.
5. Can anyone study physics?
Ans. Physics can be studied by anyone with an interest and curiosity in understanding the natural world. While it may seem complex, starting with basic concepts and gradually building knowledge and skills can make physics accessible to anyone. It is a subject that encourages critical thinking, problem-solving, and a deeper understanding of the universe we live in.
146 videos|358 docs|249 tests
Download as PDF
Explore Courses for UPSC exam

Top Courses for UPSC

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

past year papers

,

Previous Year Questions with Solutions

,

Objective type Questions

,

MCQs

,

study material

,

Viva Questions

,

Exam

,

video lectures

,

Important questions

,

pdf

,

Semester Notes

,

Physics General | Science & Technology for UPSC CSE

,

mock tests for examination

,

Extra Questions

,

practice quizzes

,

Summary

,

shortcuts and tricks

,

Physics General | Science & Technology for UPSC CSE

,

Free

,

Physics General | Science & Technology for UPSC CSE

,

Sample Paper

,

ppt

;