JEE Exam  >  JEE Notes  >  Mock Tests for JEE Main and Advanced 2025  >  Solved Examples: Waves & Sound Waves

Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025 PDF Download

Question 1: A sound wave of 42.0-cm wavelength enters the tube shown in the below figure. What must be the smallest radius r such that a minimum will be heard at the detector?
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
Concept:
A minimum sound will be heard at the detector if the sound waves coming from the curve part and the straight part is equal to the half the wavelength of the sound waves.
Solution:
The corresponding figure of the sound waves in the passing through the curve part and straight part is shown below:
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
Consider the sound waves start from the point A. The sound waves will meet at the point B and interfere and can be detected.
The path length of the sound waves passing through the curve is equal to half the circle having radius r centered at C.
Thus, the path length of the sound waves in the curve part is
L1 = πr
The path length of the sound in the tube ABC is equal to the diameter of the circle having radius r centered at C. So, the path length of the sound waves traveling in it is
L2 = 2r
Now, the path difference of the sound waves at the point C is
Δp = L1- L2
= πr – 2r
= (π – 2)r
For the sound to be heard minimum at the detector, the difference in path length of the sound waves is
Δp = λ/2
Insert Δp = (π – 2)r in the above equation gives
Δp = λ/2
(π – 2)r = λ/2
r = λ/[2(π-2)]
Substitute 42.0 cm  forλ  in the above equation gives
r = λ/[2(π-2)]
= [(42.0 cm) (10-2 m/1 cm)]/2(3.14-2)
= 18.421×10-2 m
Rounding off to three significant figures, the smallest radius of the curve part of the tube to be heard minimum sound at the detector is 18.4×10-2 m.

Question 2: Two stereo loud speakers are separated by a distance of 2.12 m. Assume that the amplitude of the sound from each speaker is approximately the same at the position of a listener, who is 3.75 m directly in front one of the speakers; see below figure. (a) For what frequencies in the audible range (20-20,000 Hz) will there be a minimum signal? (b) For what frequencies is the sound a maximum?
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
Concept:
The signal observed will be minimum when the path difference between the signals from the sources is equal to half integral multiple of the wavelength.
The signal observed will be maximum when the path difference between the signals from the sources is equal to the integral multiple of the wavelength.
Solution:
(a) The corresponding figure for the signals coming from the sources is shown below:
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
From the figures, the two speaker are labeled as Sand S2. The listener is labeled as O.
From the triangle S1 S2O, the path S1O is
S1O = √[(S1 S2)2 + (S2O)2]
= √[(2.12 m)2 + (3.75 m)2]
= 4.3078 m
Now, the path difference between the signal coming from the speakers S1 and S2 is
Δp = S1O - S2O
= 4.31 m – 3.75 m
= 0.56 m
The signal observed by the listener will be minimum when the path difference is equal to the half integral multiple of the wavelength λ.
Δp = (n - ½ ) λ
Here, n = 1,2,3….
The wavelength of the sound wave is
λ = v/f
Here, speed of the sound waves is  and frequency of the sound wave is f.
Insert λ = v/f in the equation Δp = (n - ½ ) λ gives
Δp = (n - ½ ) λ
= (n - ½ ) (v/f)
f = (n - ½ ) (v/Δp)
The speed of the sound waves in air at room temperature is 343 m/s.
Substitute 343 m/s  forv and 0.56 m for Δp in the equation  f = (n - ½ ) (v/Δp) gives
f = (n - ½ ) (v/Δp)
= (n - ½ ) [(343 m/s)/(0.56 m)] (1 Hz.s)
= (n – ½) 612.5 Hz
Rounding off to three significant figures, the frequencies of the speakers should
(n – ½) 613 Hz for the single to be minimum.
(b) The signal observed by the listener will be maximum when the path difference is equal to the integral multiple of the wavelength λ.
Δp = nλ
Here, n = 1,2,3…..
The wavelength of the sound wave is
λ = v/f
Here, speed of the sound waves is v and frequency of the sound wave is f.
Insert λ = v/f  in the equation Δp = nλ gives
Δp = nλ
= n (v/f )
f = n (v/ Δp)
The speed of the sound waves in air at room temperature is 343 m/s.
Substitute 343 m/s for v and 0.56 m for Δp  in the equation f = n (v/ Δp), gives
f = n (v/ Δp)
= n [(343 m/s)/(0.56 m)] (1 Hz.s)
= n (612.5 Hz)
Rounding off to three significant figures, the frequencies of the speakers should
n (613 Hz) for the single to be maximum.

Question 3: S in below figure is a small loudspeaker driven by an audio oscillator and amplifier, adjustable in frequency from 1000 to 2000 Hz only. D is a piece of cylindrical sheet metal pipe 45.7 cm long and opens at both ends. (a) At what frequencies will resonance occur when the frequency emitted by the speaker is varied from 1000 to 2000 Hz? (b) Sketch the displacement nodes for each resonance. Neglect end effects.
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
Concept:
The given cylindrical sheet metal pipe is equivalent to open tube pipes.
The resonant frequency of the open tube pipe is
f= n (v/2L)
Here, n = 1,2,3…..., speed of the sound in the tube is v and length of the tube is L.
For corresponding frequencies emitted by the small loudspeaker, the tube will resonate.
Solution:
(a) The speed of the sound in air at room temperature is 343 m/s.
Substitute 343 m/s  forv and 45.7 cm for  in the equation f= n (v/2L) gives
fn = n [v/2L]
= n  [ (343 m/s)/2 (45.7 cm) (10-2 m/1 cm)]
= n (375.275/s) (1 Hz.s)
= n (375.275 Hz)
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
For the first harmonic, insert n = 1 in the equation fn = n (375.275 Hz)
gives
fn = n (375.275 Hz)
f1 = (1) (375.275 Hz)
= 375.275 Hz
For the second harmonic, insert n = 2 in the equation fn = n (375.275 Hz)  gives
f2 = (2) (375.275 Hz)
= 750.55 Hz
For the third harmonic, insert n = 3 in the equation f= n (375.275 Hz) gives
f3 = (3) (375.275 Hz)
= 1125.825 Hz
For the fourth harmonic, insert n = 4 in the equation fn = n (375.275 Hz)  gives
f4 = (4) (375.275 Hz)
= 1501.1 Hz
For the fifth harmonic, insert n = 5 in the equation fn = n (375.275 Hz)   gives
f5 = (5) (375.275 Hz)
= 1876.375 Hz
For the sixth harmonic, insert n = 6 in the equation fn = n (375.275 Hz) gives
f6 = (6) (375.275 Hz)
= 2251.65 Hz
It is given that the frequency emitted by the small loudspeaker is varied from 1000 Hz to 2000 Hz. This means the tube will oscillate with frequencies lies between 1000 Hz to 2000 Hz. So, the first, second and sixth harmonics are not resonating with the tube as their frequencies leis beyond the given range. Only third, fourth and fifth harmonic will resonate.
Rounding off to three significant figures, the tube will resonate at frequencies 1130 Hz, 1500 Hz, and 1880 Hz.
(b) For n = 3, the displacement nodes are shown below:
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
For n = 4, the displacement nodes are shown below:
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025
For n = 5, the displacement nodes are shown below:
Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025

The document Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025 is a part of the JEE Course Mock Tests for JEE Main and Advanced 2025.
All you need of JEE at this link: JEE
357 docs|148 tests

Top Courses for JEE

FAQs on Solved Examples: Waves & Sound Waves - Mock Tests for JEE Main and Advanced 2025

1. What are waves and how are they created?
Ans. Waves are disturbances that transfer energy from one place to another without transferring matter. They can be created by various sources such as vibrations, oscillations, or disturbances in a medium like air, water, or solids.
2. What are the different types of waves?
Ans. There are several types of waves, including mechanical waves, electromagnetic waves, transverse waves, longitudinal waves, surface waves, and standing waves. Each type has distinct characteristics and properties.
3. How is sound produced and transmitted as a wave?
Ans. Sound is produced when an object vibrates, causing the surrounding air molecules to vibrate. These vibrations create compressions and rarefactions, forming a sound wave. The sound wave then travels through the air or any other medium, transmitting the sound to our ears.
4. What factors affect the speed of sound waves?
Ans. The speed of sound waves depends on various factors, including the temperature, density, and elasticity of the medium through which they are traveling. In general, sound travels faster in solids, slower in liquids, and even slower in gases.
5. How does the frequency of a sound wave relate to its pitch?
Ans. The frequency of a sound wave determines its pitch. Higher frequency waves have a higher pitch, while lower frequency waves have a lower pitch. For example, a high-frequency sound wave corresponds to a high-pitched sound, like a whistle, while a low-frequency sound wave corresponds to a low-pitched sound, like a bass drum.
357 docs|148 tests
Download as PDF
Explore Courses for JEE exam

Top Courses for JEE

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

shortcuts and tricks

,

Summary

,

Semester Notes

,

Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025

,

Important questions

,

Objective type Questions

,

Extra Questions

,

Sample Paper

,

pdf

,

mock tests for examination

,

video lectures

,

practice quizzes

,

ppt

,

MCQs

,

Exam

,

Free

,

Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025

,

study material

,

past year papers

,

Viva Questions

,

Previous Year Questions with Solutions

,

Solved Examples: Waves & Sound Waves | Mock Tests for JEE Main and Advanced 2025

;