Redox Reactions Class 11 Notes Chemistry Chapter 7

Electrochemistry is the branch of chemistry which deals with the chemical changes caused in the matter by passage of electric current and conversion of chemical energy into electrical energy and vice versa.

Comparison of Electrolytic and Metallic Conduction

Electrolytic Conductance:
Specific Resistance or resistivity (ρ):
R = ρ× l /A
Where,
R = Resistance
A=Area of cross sections of electrodes
l = Distance between the electrodes.

Specific Conductance  or Conductivity (κ):
κ = 1/ ρ
Units: W^–1 cm^–1 or Sm^–1

Equivalent Conductance (Λ):
Conducting power of all the ions produced by one g-equivalent i.e. one equivalent of an electrolyte in a given solution
Λ  = 1000 κ /C
Where, C be the normality of solution i.e. concentration of electrolytic solution in equivalent/L.
Units: W^–1cm²

Molar Conductance (Λ_m):
Conductance of solution due to all the ions produced by one mole of the dissolved electrolyte in a given solution.
Λ_m = k/c
Where, c = concentration of solution in mol m^-3.
Λ_m = k×1000/M
Where, M is molarity of solution.
Units: S cm² mol^-1

Relation between Λ and Λ_m
Λ_m = n Λ
Where n = n-factor of the electrolyte = total charge carried by either ion = M/E

Variation of Conductance with Dilution:
Specific conductance: Decrease with dilution due to decrease in number of ions per c.c. of the solution.
Molar and Equivalent Conductance: Increases with increase in dilution.

• Weak electrolyte: Increase is due to increase in extent of ionization.
• Strong electrolyte: Increase is due to increase in mobility of ions because of decreased inter-ionic attraction.

Debye-Hückel-Onsager Equation
Λ_m = Λ⁰_m – (A+B Λ⁰_m) √C
Where,
A & B = Debye-Hückel constants.
C = Molar concentration
Λ⁰_m = Limiting molar conductivity i.e. molar conductivity at infinite dilution.
At 298 K,
Λ_m = Λ⁰_m – (60.2 – 0.299 Λ⁰_m) √C

Kohlransch’s Law of Independent Migration of Ions:
"At infinite dilution, when dissociation is complete, each ion makes a definite contribution towards equivalent conductance of the electrolyte irrespective of the nature of the ion with which it Is associated and the value of equivalent conductance at infinite dilution for any electrolyte is the sum of contribution of its constituent ions", i.e., anions and cations. Thus,

where,

According to Kohlrausch’slaw. “conductivity of ions is constant at infinite dilution and it does not depend on nature of co-ions.
”For A_xB_y type electrolyte,


Here Z⁺and Z^- are the charges present on cation and anion.

Here m and n are the number of moles of cations and anions.

Faraday’s Laws of Electrolysis:
First Law: “The mass of a substance deposited or liberated at any electrode is directly proportional to the amount of charge passed.”
w = zQ
Where z = electrochemical equivalent i.e. the mass of the substance in grams deposited or liberated by passing one coulomb of charge,

Electrochemical Cells:
Difference in Electrolytic Cell and Galvanic Cell:

Standard electrode potential: The potential difference developed between metal electrode  and the solution of its ions of unit molarity (1M) at 25°C (298 K)

IUPAC Cell Representation: Anode (Molarity of electrolyte at anode) || Cathode (Molarity of electrolyte at cathode)
E⁰_cell = E⁰_cathode - E⁰_anode

Example:

The Nernst Equation:
For a general reaction such as

M₁A + m₂B .....  n₁X + n₂Y + ....   .......(i)
Occurring in the cell, the Gibbs free energy change is given by the equation

where
'a' represents the activities of reactants and products under a given set of conditions and
?G^o refers to free energy change for the reaction when the various reactants and products are present at standard conditions.
The free energy change of a cell reaction is related to the electrical work that can be obtained from the cell, i.e.,

?Go = -nFE_cell and ?G^o = -nFE^o.
On substituting these values in Eq. (ii) we get

This equation is known as Nearnst equation.

Some other important relations:

• K_eq = e^nE/FRT
• ΔH = nF [T(dE/dT)-E]
• ΔS = nF(dE/dT)_P
   

Some Important Half Cells:
Hydrogen Electrode: 

• The electrode reaction :  H₂  -> 2H⁺ + 2e^–
• Electrode representation:  Pt | H₂ (1 atm) | H⁺ (1M).

Ferrous – Ferric Electrode:

• Electrode reaction: Fe³⁺ + e^– →  Fe²⁺
• Electrode representation: Pt | Fe²⁺ (C₁), Fe³⁺ (C₂).

Quin – Hydrone Electrode:

• Electrode reaction:
  
• Electrode representation:  Pt.|QH₂,Q,H⁺ (C)

Calomel electrode:

• Electrode reaction: ½ Hg₂Cl₂ +e^- ↔ Hg +Cl^-
• Electrode is representation:  Cl^- (1M) | Hg₂Cl₂, Hg

Oxidation and Reduction

• Oxidation is defined as the loss of electrons by a chemical species (atom, ion or molecule).
• Reduction is the gain of electrons by a chemical species (atom, ion or molecule).
• An oxidising agent that chemical species which takes electrons thus it is an electron acceptor.
• A reducing agent is the chemical species that gives electrons and thus acts as an electron donor.
  • When Fe²⁺(aq) ions are being oxidised they are acting as reducing agents, and when Fe³⁺(aq) ions are being reduced they are acting as oxidising agents. In general ;

• 
  
  
  
  
  
  • Neither reduction nor oxidation occurs alone.  Both of them occur simultaneously. Since both these reactions must occur at the same time they are often termed as "redox reactions". The oxidation or reduction portion of a redox reaction, including the electrons gained or lost can be determined by means of a Half-Reaction
  

Oxidation Number

• The oxidation number for an element in a covalent compound is by taking the oxidation number to be equal to the charge that the element would carry, if all the bonds in the compound were regarded as ionic instead of covalent.
• The sum of the oxidation numbers of all the atoms in an uncharged compound is zero. In case of an ion,  the algebraic sum of the oxidation numbers of all the atoms is equal to the charge on the ion.
• Oxidation number of any element in its elementary state is zero.
• Fluorine is the most electronegative element. Its oxidation number is always  -1 .
• Oxygen after fluorine is the second most electronegative element. It  shows an oxidation state of -2 in almost all the compounds excepts peroxides and superoxides,
• In all compounds, except ionic metallic hydrides, the oxidation number of hydrogen is +1.
• In any compounds has more than two elements, the oxidation number of any one of them may have to be obtained by first assigning reasonable oxidation numbers to the other elements.

Oxidation Number / State Method For Balancing Redox Reactions:
This method is based on the principle that the number of electrons lost in oxidation must be equal to the number of electrons gained in reduction. The steps to be followed are :

• Write the equation (if it is not complete, then complete it) representing the chemical changes.
• By knowing oxidation numbers of elements, identify which atom(s) is(are) undergoing oxidation and reduction. Write down separate equations for oxidation and reduction.
• Add respective electrons on the right of oxidation reaction and on the left of reduction reaction. Care must be taken to ensure that the net charge on both the sides of the equation is same.
• Multiply the oxidation and reduction reactions by suitable numbers to make the number of electrons lost in oxidation reactions equal to the number of electrons gained in reduction reactions.
• Transfer the coefficient of the oxidizing and reducing agents and their products to the main equation.
• By inspection, arrive at the co-efficients of the species not undergoing oxidation or reduction.
• Some elements like manganese, chromium, nitrogen and chlorine show variable oxidation states. 
• When an element is oxidised its oxidation number gets increased while reduction on any element decreases its oxidation number. Change in oxidation number can be used to decide whether an oxidation or a reduction has taken place. In the change from chloromethane to dichloromethane, for example,
  C  H₃  Cl    C  H₂ Cl₂
  -2 +1 -1     0 +1 -1
  The oxidation number of carbon is increased from -2 to 0. The carbon is therefore being oxidised.

Half-Reaction or Ion-Electron Method For Balancing Redox Reactions
This method involves the following steps :

• Divide the complete equation into two half reactions, one representing oxidation and the other reduction.
• Balance the atoms in each half reaction separately according to the following steps:
  • First of all balance the atoms other than H and O.
  • In a reaction taking place in acidic or neutral medium, oxygen atoms are balanced by adding molecules of water to the side deficient in oxygen atoms while hydrogen atoms are balanced by adding H⁺ ions to the other side deficient in hydrogen atoms. On the other hand, in alkaline medium (OH^-), every excess of oxygen atom on one side is balanced by adding one H₂O to the same side and 2OH^- to the other side. In case hydrogen is still unbalanced, then balance by adding one OH^-, for every excess of H atom on the same side as the excess and one H₂O on the other side.
  • Equalize the charge on both sides by adding a suitable number of electrons to the side deficient in negative charge.
  • Multiply the two half reactions by suitable integers so that the total number of electrons gained in one half reaction is equal to the number of electrons lost in the other half reaction.

Common Oxidising and Reducing Agents