NEET Exam  >  NEET Notes  >  Inorganic Chemistry for NEET  >  Short & Long Answer Questions: Classification of Elements & Periodicity in Properties

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET PDF Download

Short Answer Questions


Q.1 Why is atomic number a better basis for classification of the elements than atomic mass?

Answer: The atomic mass of the element relates to the nucleus which is present in the center of the atom. But the properties of the elements depend upon the electronic configuration which is linked with atomic number. As the atomic number or electronic configuration atom changes, the properties of the element involved also change. Therefore, atomic number is a better basis for the classification of the elements than the atomic mass.


Q.2 Why do elements in a group show similar chemical properties?

Answer: In a group, all the elements present have the same valence shell electronic configuration of their atoms. Therefore, the elements belonging to the same group show similar chemical properties.


Q.3 Third period has eight and not eighteen elements. Explain.

Answer: No. of elements present in a particular period correspond to the electrons in the energy shell. The third period corresponds to the third energy shell which has eight electrons. Therefore, the third period has eight elements.


Q.4 Hydrogen is regarded as a rogue element in the periodic table. Discuss.

Answer: Hydrogen is regarded as a rogue element in the periodic table because till today its position is not satisfactory. Although it has been placed on the top of alkali metals on the basis of electronic con-figuration, but it is a non-metal and also resembles halogens of group 17 in many characteristics.


Q.5 Why are there fourteen elements in the lanthanoid series?

Answer: In the lanthanoid series, the electrons are filled in 4f sub-shell. Since the 4f sub-shell can have a maximum of fourteen electrons, there are fourteen elements in the lanthanoid series.

Lanthanoid SeriesLanthanoid Series


Q.6 Why is ΔiH1 of Mg more than that of Al?

Answer: The ΔiH1 of Al is expected to be more than that of Mg because of smaller size and greater nuclear charge. But actually it is less since the electronic configuration of Mg is more symmetrical than that of Al. For details, consult Section 3.15.


Q.7 Ne and Na+ ions are isoelectronic species. Do they have same ionization enthalpies also?

Answer: No, they do not have the same ionization enthalpies because the nuclear charges are not same. Na+ion with greater nuclear charge has more ionization enthalpy than Ne.


Q.8 The valence of representative elements is either equal to the number of valence electrons or eight minus this number. Explain.

Answer: The representative elements belonging to s and p-blocks tend to have noble gas configuration of their atoms. To achieve this, they do so either by losing the valence electrons or gaining electrons which is equal to eight minus the number of valence electrons. For example, valence of sodium (Z = 11) is one because it has one valence electron (2, 8, 1) which it loses to have the configuration of neon. Similarly, the valence of chlorine (Z = 17) is also one because it has seven valence electrons (2, 8, 7) and accepts one electron (8 - 7 = 1) to have the configuration of nearest noble gas element argon.


Q.9 Why isΔiHvalue of an element more than its ΔiH1 value?

Answer: ΔiH1 value is the energy needed to remove first electron from the gaseous atom. With the loss of the electron, the hold of the nucleus on the remaining electrons increases. Therefore, greater energy is needed to remove the second electron from the gaseous atom. The  ΔiH2 value of an element is always more than its ΔiH1 value. For detail, consult text part.


Q.10 Chlorine can be converted into chloride ion more easily as compared to fluoride ion from fluorine. Explain.

Answer: The negative electron gain enthalpy of chlorine (ΔegH=−349kJmol−1)  is more than that of fluorine (ΔegH=−328kJmol−1). This means that an atom of chlorine has a greater attraction for the outside electron than in case of fluorine. Therefore, chlorine can be converted to chloride ion more readily as compared to fluorine forming fluoride ion.


Q.11 Alkali metals do not form dipositive ions. Why?

Answer: The general, electronic configuration of the alkali metals is ns(n is valence shell). By losing the valence electron, they acquire the configuration of the nearest noble gas element and therefore, have no urge or tendency to lose another electron to form dipositive ion.


Q.12 Among the elements K, Mg, C and N which would show the maximum difference in the first and second ionization enthalpies.

Answer: The electronic configurations of the elements are: 


Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET 


The element K is expected to show the maximum difference in ΔiH1 and ΔiH2  values. Actually, when its atom loses one electron; the cation left has the noble gas configuration. The removal of the second electron from the ion requires very high ionization enthalpy (ΔiH2).


Q.13 What would be IUPAC names and symbols for elements with atomic numbers 122, 127, 135, 149 and 150?

Answer: From the Table 3.6, page 3/11, the roots for 2, 7, 5, 9 and 0 are bi sept, pent, enn and nil respectively. Therefore, their names and symbols are : Z Name  Symbol 122 Unbibium Ubb 127 Unbiseptium Ubs 135 Untripentium  Utp 149 Unquadennium Uqe 150 Unpetnilium  Upn.


Q.14 The element 119 has not been discovered. What could be the IUPAC name and symbol for this element? On the basis of the periodic table, predict the electronic configuration of this element and also the formula of its most stable chloride and oxide.

Answer: (i) The roots for 1 and 9 are un and enn respectively. Therefore, the name for the element with Z = 119 is un + un + enn + ium = ununennium and its symbol is Uue. (ii) The maximum number of elements which can be accommodated in the present set up of the long form of the periodic table = 118 (For details refer to Q. 2, page 3/91). Since this last element would be an inert gas, therefore, the element with Z = 119 will be an alkali metal and hence its outer electronic configuration will be 8s1 or its complete electronic configuration will be 1s22s22p63s23p63d104s24p64d104f145s2 5p65d105f146s26p66d107s27p68s1. (iii) Since the element with Z = 119 will be an alkali metal, therefore, formula of its chloride will be MCl and that of its stable oxide will be bold M2O where M is the alkali metal.


Q.15 Why has the zero group been placed at the extreme right of the periodic table?

Answer: This is in accordance with their electronic configurations because each period starts with the filling of s-subshell and is completed with the filling of p-subshell of the same principal shell.


Q.16 The first ionization enthalpy of carbon atom is greater than that of boron whereas the reverse is true for the second ionization enthalpy. Explain.

Answer: E.C. of C-atom is 1s22s22p2 and E.C. of B-atom is 1s22s22p1. The first electron to be removed in both cases is from a 2p-orbital but nuclear charge of C is more than that of B. Therefore, the ΔiH1 of C is greater than that of B. After the removal of first electron, the second electron to be removed from C-atom is from a 2p-orbital whereas that from B-atom is from a 2s orbital. Since a s-orbital is more penetrating and hence is more strongly attracted by the nucleus than a p-orbital, therefore, ΔiH2 of B is higher than that of C.


Q.17 Which of the elements Na, Mg, Si and P would have the greatest difference between the first and the second ionization enthalpies. Briefly explain your answer.

Answer: Among Na, Mg, Si and P, Na is an alkali metal. It has only one electron in the valence shell, therefore, its ΔiH1 is very low. However, after removal of one electron, it acquires neon gas configuration, i.e., Na+(1s22s22p6). Therefore, its ΔiH2 is expected to be very high. Consequently, the difference in first and second ionization enthalpies would be greatest in case of Na. However, it may be noted here that in case of Mg, Si and P, although theirΔiH1 will be much higher than that of Na but their ΔiH2 will be much lower than that of Na. As a result, the difference in their respectiveΔiH1 and ΔiH2 would be much lower than that of Na.


Q.18 Arrange the following elements in the increasing order of non-metallic character : B, C, Si, N, F.

Answer: Arranging the elements into different groups and periods in order of their increasing atomic numbers, we have, 13           14           15           16           17 B             C             N             -              F -              Si             -              -              - Since the metallic character increases down the group and non-metallic character increases along a period from left to right, therefore, Si is the most metallic or the least non-metallic element. The overall increasing order of non- metallic character is: Si<B<C<N<F.


Q.19 Arrange the following ions in order of decreasing ionic radii: Li2+,He+,Be3+.

Answer: He+,Li2+and Be3+ are all isoelectronic ions. Among isoelectronic ions, ionic radius decreases as the positive charge increases. Therefore, the ionic radii decrease in the order: He+>Li2+>Be3+.

Long Answer Questions

Q.20 Explain the important general characteristics of groups in the modern periodic table in brief.

Answer: The elements of a group show the following important similar characteristics: 

(i) Electronic configuration. All elements in a particular group have similar outer electronic configuration e.g., all elements of group I’, i.e Alkali metals have ns1 configuration in their valence shell. Similarly, group 2 elements (alkaline Earths) have ns2 outer configuration and halogens (group 17) have ns2 np5 configuration (where n is the outermost shell).

(ii) Valency. The valency of an element depends upon the number of electrons in the outermost shell. So elements of a group show the same valency, e.g., elements of group 1 show + 1 valency and group 2 show + 2 valencies i.e. valency i.e., NaCl > MgCl2 etc.

(iii) Chemical properties. The chemical properties of the elements are related to the number of electrons in the outermost shell of their atoms. Hence all elements belonging to the same group show similar chemical properties. But the degree of reactivity varies gradually from top to bottom in a group. For example, in group 1 all the elements are highly reactive metals but the degree of reactivity increases from Li to Cs. Similarly, elements of group 17, i.e., halogens: F, Cl, Br, I are all non-metals and they’re- reactivity goes on decreasing from top to bottom.


Q.21 Explain the electronic configuration in periods in the periodic table. 

Answer: Each successive period in the periodic table is associated with the filling Up of the next higher principal energy level (n – 1, n – 2, etc.). It can be readily seen that the number of elements in each period is twice the number of atomic orbitals available in the energy level that is being filled. The first period starts with the filling of the lowest level (1s) and has thus the two elements – hydrogen (1s1) and helium (1s2) when the first shell (K) is completed. The second period starts with lithium and the third electron enters the 2s orbital.

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET

The next element, beryllium has four electrons and has the electronic configuration 1s2 2s2. Starting from the next element boron, the 2p orbitals are filled with electrons when the L shell is completed at neon (2s2 2p6). Thus there are 8 elements in the second period. The third period (n = 3) being at sodium, and the added electron enters a 3s orbital. Successive filling of 3s and 3p orbitals give rise to the third period of 8 elements from sodium to argon.

The fourth period (n = 4) starts at potassium with the filling up of 4p of 4s orbital. Before the 4p orbital is filled, the filling up of 3d orbitals becomes energetically favorable and we come across the so-called 3d transition series of elements. The fourth period ends at krypton with the filling up of the 4p orbitals. Altogether we have 18 elements in the fourth period. The fifth period (n = 5) beginning with rubidium is similar to the fourth period and contains the 4d transition series starting at yttrium (Z = 39).

This period ends at xenon with the filling up of the 5p orbitals. The sixth period (n = 6) contains 32 elements and successive electrons enter 6s, 4/, 5d, and 6p orbitals, in that order. Filling up of the 4/ orbitals begins with cerium, (Z = 58) and ends at lutetium (Z = 71) to give the 4/-inner transition series which is called the lanthanide series. The seventh period (n = 7) is similar to the sixth period with the successive filling up of the 7s, 5f, 6d, and 7p orbitals and includes most of the man-made radioactive elements.

This period will end at the element with atomic number 118 which would belong to the noble gas family. Filling up of the 5f orbitals after actinium (Z = 89) gives the 5f-inner transition series known as the actinide series. The 4f and 5f transition series of elements are placed separately in the periodic table to maintain its structure and to preserve the principle of classification by keeping elements with similar properties in a single column.


Q.22 Explain the variation of valence in the periodic table.

Answer: Variation of valence in a group as well as across a period in the periodic table occurs as follows:

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET

1. In a group: All elements in a group show the same valency. For example, all alkali metals (group 1) show a valency of 1+. Alkaline earth metals (group 2) show a valency of 2+.

However, the heavier elements of p-block elements (except noble gases) show two valences: one equal to the number of valence electrons or 8-No. of valence electron# and the other two less. For example, thallium (Tl) belongs to group 13. It shows valence of 3+ and 1+.

Lead (Pb) belongs to group 14. It shows valence of 4+ and 2+.

Antimony (Sb) and Bismuth (Bi) belong to group 15. They show valence of 5+ and 3+ being more stable.

This happens due to the non-participation of two s-electrons present in the valence shell of these elements. This non-participation of one pair of s-electrons in bonding is called the inert-pair effect.

2. In a period: The number of the valence electrons increases – in going from left to right in a period of the periodic table. Therefore the valency of the elements in a period first increases, and then decreases.

The document Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET is a part of the NEET Course Inorganic Chemistry for NEET.
All you need of NEET at this link: NEET
74 videos|106 docs|111 tests

Top Courses for NEET

FAQs on Short & Long Answer Questions: Classification of Elements & Periodicity in Properties - Inorganic Chemistry for NEET

1. What is the classification of elements based on?
Ans. The classification of elements is based on their atomic numbers, electronic configurations, and properties.
2. How are elements classified into periods and groups?
Ans. Elements are classified into periods based on the number of electron shells and into groups based on similar properties and valence electron configurations.
3. What are the properties that show periodicity in the periodic table?
Ans. Some properties that show periodicity in the periodic table include atomic radius, ionization energy, electron affinity, electronegativity, and metallic character.
4. Why does atomic radius decrease across a period?
Ans. Atomic radius decreases across a period due to the increasing effective nuclear charge, which attracts the electrons more strongly towards the nucleus, resulting in a smaller atomic size.
5. Why does ionization energy increase across a period?
Ans. Ionization energy increases across a period due to the increasing effective nuclear charge and decreasing atomic radius. It becomes more difficult to remove an electron as the attraction between the positively charged nucleus and the electrons increases.
74 videos|106 docs|111 tests
Download as PDF
Explore Courses for NEET exam

Top Courses for NEET

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Summary

,

Sample Paper

,

Previous Year Questions with Solutions

,

pdf

,

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET

,

mock tests for examination

,

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET

,

Short & Long Answer Questions: Classification of Elements & Periodicity in Properties | Inorganic Chemistry for NEET

,

practice quizzes

,

Viva Questions

,

Semester Notes

,

past year papers

,

Exam

,

Important questions

,

MCQs

,

shortcuts and tricks

,

Free

,

ppt

,

Extra Questions

,

study material

,

video lectures

,

Objective type Questions

;