Class 8 Exam  >  Class 8 Notes  >  Science Class 8  >  Long Answer Questions - Combustion and Flame

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

Q1: What are the advantages of using CNG and LPG as fuels?

Ans: The advantages of using CNG and LPG as fuels are as follows:
1. They both are cleanest burning fuels of all fossil fuels.
2. They are less polluting, non-corrosive.
3. They can be sent through pipes easily.
4. These are easily available and have affordable cost.
5. LPG and CNG both are easy to store and transport.
6. As there calorific value is very high therefore, they are used for cooking purpose.
Q2: Differentiate between LPG and wood as fuel.

Ans:

LPGWOOD
It is costly fuel, but readily available and easy to transport in cylinders and tankersIt is cheap fuel but not readily combustible
It is more energy efficientIt is less energy 
Its calorific value is 55000 KJ/kgIts calorific value is 17000-25000 Kj/kg
It causes less air pollution and prevent deforestation by supplementing the fuel.It causes air pollution and deforestation.
It is an exhaustible natural resource.It is not an exhaustible natural resource as trees can be grown in 5-10 years

Q3: Explain working and principles of a fire extinguisher.

Ans: The most commonly used fire extinguisher is water, it works when wood and paper are on fire, but if electrical equipment is on fire water may conduct electricity and may harm those trying to douse the fire, also water is not suitable for fires involving oil and petrol, since water is heavier than oil it sinks below the oil and oil keeps burning on the top. So if electrical equipment and inflammable materials are on fire Carbon dioxide is the best extinguisher. Since it is heavier than oxygen it covers the fire so that the contact between fuel and oxygen is cut off and the fire is controlled, it also bring s down the temperature of the fuel. For this purpose carbon dioxide is stored at high pressure as a liquid in cylinders.
Q4: Explain why the process of rusting can be called as slow combustion.

Ans: Rusting of iron is a slow oxidation process in which iron using oxygen and water is oxidised and is rusted out, it produces heat at very slow rate. The combustion process is also an oxidation process and is a chemical reaction by which a fuel and an oxidiser react to produce heat and light, thus we can say rusting of iron is a slow combustion process, although combustion is much faster than rusting.

Q5: Complete the following table: 

Material

Combustible

Non-combustible

Wood

Paper

Iron nail

Kerosene oil

Stone piece

Straw

Charcoal

Matchsticks

Glass

 

 

Ans. Combustible and Non-combustible Substances 

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

Q6: What are the essential conditions for combustion? Explain with the help of an activity.
 Ans.
Take a candle. Light it and fix it on a table. Put a glass chimney over the candle and rest it on wooden blocks in such a way that air can enter the chimney. We see that candle remains lighted. Remove the blocks and let the chimney rest on the table. We see that the flame flickers and produces smoke. Now put a glass plate over the chimney. We see that flame goes off because air is not available. This activity shows that air is essential to burn a fuel at its ignition temperature.

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

Q7: Describe the history of the matchstick.
 Ans.
History of matchstick is about five thousand years old. The modern safety match was developed only about 200 years ago. A mixture of antimony trisulphide, potassium chlorate and white phosphorus with some glue and starch was applied on the head of a match made of suitable wood. When it struck against a rough surface, white phosphorus got ignited and combustion of matchstick started. These days red phosphorus is used in place of white phosphorus.

Q8: Complete the following table. 

S. No.

Material

Forms flame

Does not form flame

1.

Candle

 

 

2.

Magnesium

 

 

3.

Camphor

 

 

4.

Kerosene stove

 

 

5.

Charcoal

 

 

Ans. Materials forming Flame on Burning

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

Q9: Write three examples of each type of fuel in tabular form.
Ans.

S. No.

Solid Fuels

Liquid Fuels

Gaseous Fuels

1.

Coal

Kerosene oil

Natural gas

2.

Wood

Petrol

L.P.G

3.

Dung Cake

Diesel

Gobar Gas

 

Q10: Make a table to show the calorific value of various fuels.
Ans. 

Name of fuel

Calorific Value kJ/kg

Cowdung cake

6000-8000

Wood

17000-22000

Coal

25000-33000

Petrol

45000

Kerosene

45000

Diesel

45000

Methane

50000

CNG

50000

LPG

55000

Biogas

35000-40000

Hydrogen

150000

 

Q11: What is deforestation? Write its effect on environment.
Ans. 
Cutting of trees is called deforestation.
Effects: Deforestation is very harmful to the environment.The following are the effects of deforestation:
1. The annual rainfall is disturbed in that area.
2. The frequent floods come.
3. Balance of oxygen and carbon dioxide is disturbed.
4. It causes respiratory problem.
5. Trees provide us with useful substances which are lost due to deforestation.

Q12: What are the ill-effects due to the increasing consumption of fuel?
Ans. Harmful effects of using more fuels: 

(i) Carbon fuels like wood, coal and petroleum release unburnt carbon particles. These fine particles create respiratory disorders and diseases like asthma.
(ii) Incomplete combustion of these fuels gives carbon monoxide. It is very harmful gas and causes respiratory disorders. It can kill persons sleeping in that room.
(iii) Excessive use of fuels causes global warming.
(iv) They cause acid rain which is harmful for crops, buildings and soil.

The document Class 8 Science Chapter 4 Question Answers - Combustion and Flame is a part of the Class 8 Course Science Class 8.
All you need of Class 8 at this link: Class 8
91 videos|273 docs|44 tests

Top Courses for Class 8

FAQs on Class 8 Science Chapter 4 Question Answers - Combustion and Flame

1. What is combustion?
Ans. Combustion is a chemical process in which a substance combines with oxygen to produce heat, light, and usually, carbon dioxide and water vapor. It is a type of exothermic reaction that releases energy in the form of heat and light.
2. What are the different types of combustion?
Ans. There are three main types of combustion - rapid combustion, spontaneous combustion, and explosion. Rapid combustion occurs when a substance burns rapidly, releasing a large amount of heat and light. Spontaneous combustion happens when a substance ignites without an external ignition source due to its high reactivity or low ignition temperature. Explosion occurs when combustion happens at an extremely fast rate, resulting in a sudden release of energy and the formation of shockwaves.
3. How does a flame form during combustion?
Ans. A flame is formed during combustion when a substance vaporizes and reacts with oxygen in the air. The process begins with the heating of the substance, causing it to vaporize. The vapor combines with oxygen to form a mixture that can undergo combustion. When this mixture comes in contact with a source of ignition, it undergoes rapid oxidation, releasing energy in the form of heat and light, which is visible as a flame.
4. What are the different zones of a flame?
Ans. A flame consists of three main zones - the innermost dark zone called the zone of complete combustion, the middle luminous zone called the zone of partial combustion, and the outermost non-luminous zone called the zone of unburnt gases. In the zone of complete combustion, all the fuel is burned completely, resulting in the formation of carbon dioxide and water vapor. In the zone of partial combustion, there is insufficient oxygen for complete combustion, leading to the formation of carbon particles, which emit yellow light. The zone of unburnt gases contains unburnt fuel and is responsible for the blue color of the flame.
5. What are the factors that affect the rate of combustion?
Ans. The rate of combustion is influenced by several factors such as the availability of oxygen, temperature, surface area of the fuel, and the nature of the fuel. The presence of sufficient oxygen is essential for combustion to occur. Higher temperatures accelerate the combustion process as it provides the energy required to break the bonds in the fuel molecules. A larger surface area of the fuel allows for more contact with oxygen, leading to faster combustion. Additionally, the nature of the fuel, including its composition and volatility, can also affect the rate of combustion.
91 videos|273 docs|44 tests
Download as PDF
Explore Courses for Class 8 exam

Top Courses for Class 8

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

,

past year papers

,

video lectures

,

Sample Paper

,

Free

,

practice quizzes

,

Extra Questions

,

Objective type Questions

,

mock tests for examination

,

Important questions

,

Semester Notes

,

study material

,

Viva Questions

,

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

,

pdf

,

Class 8 Science Chapter 4 Question Answers - Combustion and Flame

,

Previous Year Questions with Solutions

,

Exam

,

Summary

,

MCQs

,

ppt

,

shortcuts and tricks

;