PREPARATION OF SODIUM CARBONATE BY SOLVAY PROCESS - Class 11 PDF Download

MAKING OF SODIUM CARBONATE BY SOLVARY PROCESS
Sodium carbonate is known as washing soda or soda ash. It is commonly occurred as a crystalline heptahydrate which readily effloresces to form a white powder, the monohydrate.
Pure sodium carbonate is a white, odorless powder that is hygroscopic means it absorbs moisture from air. It has an alkaline taste and forms a strongly alkaline water solution. It is produced by solvary process by using common salt (sodium chloride), ammonia and limestone.
The solvary process centered on a large hollow tower. At the bottom limestone was heated to release carbon dioxide.

The steps in solvary process:
Brine purification:

Brine is concentrated by evaporation. Impurities such as calcium, magnesium and iron are removed by precipitation.

For example:

Ca+2(aq) + CO3-2(aq) ——–à CaCO3(s)

Mg+2(aq) + 2OH–(aq) ——àmg(OH)2(s)

Fe+3(aq) + 3OH–(aq) ——àFe(OH)3(s)

After removing the impurities Brine solution is then filtered and passed through an ammonium tower to dissolve ammonia.

Important point to remember:

It is an exothermic process, so the ammonia is cooled.

Formation of sodium bicarbonate:

Carbon dioxide is produced by the thermal decomposition of limestone.

CaCO3——-à CO2+CaO

Carbon dioxide is bubbled through the ammoniated Brine Solution in the carbonating tower.

The carbon dioxide dissolves to form a weak acid:

CO2(g)+H2O(l)↔HCO3(aq)+H+(aq)

The ammonia in the brine reacts with H+ to form Ammonium ion.

NH3+H+↔NH4+

The bicarbonate ion reacts with Na+ to form sodium Hydrogen carbonate (sodium bicarbonate).

Na++HCO3–↔NaHCO3(s)

Sodium bicarbonate precipitates

NH3(aq)+CO2+NaCl+H2O↔NaHCO3+NH4Cl

Formation of sodium carbonate:

The suspended sodium hydrogen carbonate is removed from the carbonating tower and heated at 300°C to produce sodium carbonate.

2NaHCO3——–à Na2CO3+CO2+H2O

This CO2 is recycled back into the carbonating tower.

Ammonia recovery:

Calcium oxide which was formed as a byproduct of the thermal decomposition of limestone in the lime kiln, react with water to form calcium hydroxide

CaO(s)+ H2O(l)——–à> Ca(OH)2 (aq)

This calcium hydroxide reacts with ammonium chloride separated out of the carbonating tower by filtration.

Ca(OH)2+2NH4Cl—-à CaCl2+2H2O+ 2NH3

The ammonia is recycled back into the process to form ammoniated brime.

Calcium chloride is formed as a by-product of the solvey process.

Properties of sodium carbonate:

At room temperature, sodium carbonate (Na2CO3) is an odorless, grayish white powder which is hygroscopic. This means when it is exposed to air, it can spontaneously absorb water molecules.

Sodium carbonate has a melting point of 1,564°F (851°C), a density of 2.53 g/cm3, and is soluble in water.

Anhydrous (without water) sodium carbonate can absorb various amounts of water and form hydrates which have slightly different characteristics.

Uses of sodium carbonate:

It is use for glass making.

It is used for paper making.

It is used for production of baking soda.

It acts as water softening agent.