UPSC Exam  >  UPSC Notes  >  Science & Technology for UPSC CSE  >  NCERT Summary: Summary of Chemistry- 5

NCERT Summary: Summary of Chemistry- 5 | Science & Technology for UPSC CSE PDF Download

5. Chlorine: Chlorine belongs to group VII A. Members of this group are called halogens which means ‘salt producers’. Chlorine has seven electrons in its outer most shell and so has a valency of 1. Chlorine is prepared by the oxidation of concentrated hydrochloric acid using oxidising agents like manganese dioxide, lead dioxide, trilead tetra oxide, potassium permanganate and potassium dichromate. Chlorine is a non combustible gas but supports the burning of certain metals and nonmetals. Chlorine is highly reactive. It reacts with hydrogen, other non metals and metals to form the corresponding chlorides. Chlorine being an acidic gas turns moist blue litmus paper to red and then bleaches it. 

6. Water (H2O):

  • Water is the only substance that can exist simultaneously in all the three states of matter, i.e., solid, liquid and gaseous on this earth.
  • Pure water is a colourless, odourless and tasteless liquid.
  • The density of water is 1 g cm-3 at 4ºC. 
  • The boiling point of water is 100ºC at a pressure of 760 mm of Hg. The melting point of ice is 0ºC at a pressure of 1 atmosphere. 
  • Ice has a relative density of 0.92. The specific heat capacity of water is 1 cal/g at 15ºC. 
  • Water is called the “Universal Solvent”. Almost all substances dissolve in water to a certain extent. Hence, it known as a universal solvent. Because of this property, it is impossible to get chemically pure water on the earth. • Metals such as gold, silver, copper, tin, etc. do not react with water. Ordinary iron gets rusted and aluminium gets tarnished.
  • Water is described as being ‘hard’ if it does not lather readily with soap. ’Soft water’, on the other hand, is described as the one, which lathers readily with soap. Chemically, natural water is never pure and contains varying amounts of the dissolved impurities absorbed from the natural or man made environment. Temporary hardness and permanent hardness are the two types of hardness occurring in hard water: Water is said to be temporarily hard when it contains bicarbonates of calcium and magnesium (or hydrogen carbonates). This type of hardness can be easily removed by boiling. Water is said to be permanently hard when it contains sulphates and chlorides of calcium and magensium. Water becomes permanently hard when it passes over the rocks, which contain sulphates or chlorides of calcium and magnesium to form insoluble calcium bicarbonates or magnesium bicarbonates (or hydrogen carbonates). This hardness cannot be removed by boiling.
  • Heavy water is prepared either by prolonged electrolysis or by fractional distillation of ordinary water. Heavy water (D2O) is colourless, tasteless and odourless liquid. It has all higher values for physical constants than the corresponding values of ordinary water. Fission in uranium-235 is brought by slow speed neutron. Heavy water is used for this purpose in nuclear reactors as moderators. 

7. Ammonia (NH3):

  • Ammonia is present in atmospheric air and in natural water in trace amounts. However in sewage water, it is present in greater proportion. Ammonia is present in the combined form as various ammonium salts. The two most popular salts are ammonium chloride and ammonium sulphate.
  • Ammonia is generally obtained from Ammoniacal liquor obtained by the destructive distillation of coal, destructive distillation of nitrogenous organic matters such as horns, hoofs, bones etc. of animals, Ammonium salts.
  • In the laboratory, ammonia is usually prepared by heating a mixture of ammonium chloride and slaked lime in the ratio of 2 : 3 by mass.
  • Ammonia is a colorless gas. Its vapor density is 8.5. Hence it is lighter than air (vapor density of air = 14.4). When cooled under pressure ammonia condenses to a colorless liquid, which boils at -33.4ºC. When further cooled, it freezes to a white crystalline snow-like solid, which melts at -77.7ºC. Ammonia is one of the most soluble gases in water. At 0ºC and 760 mm of Hg pressure one volume of water can dissolve nearly 1200 volumes of ammonia. This high solubility of ammonia can be demonstrated by the fountain experiment. Ammonia is neither combustible in air nor does it support combustion. However it burns in oxygen with a greenish yellowish flame producing water and nitrogen. Ammonia reacts with the acids to form their respective ammonium salts. Ammonia is highly soluble in water and forms ammonium hydroxide. 

8. Hydrochloric Acid(HCL):

  • Hydrochloric acid is prepared by dissolving hydrogen chloride gas in water. Hydrogen chloride is a covalent compound, but when dissolved in water it ionizes to form hydrogen ions and chloride ions.
  • Hydrochloric acid is produced along with the industrial preparation of caustic soda (sodium hydroxide). During the electrolysis of sodium chloride, large quantities of hydrogen and chlorine gas are obtained as by-products. These two gases are burnt to form hydrogen chloride gas. The hydrogen chloride gas so formed is dissolved in water to form hydrochloric acid. A saturated solution of the acid has a density of 1.2 g cm-3. It contains about 40% by mass of hydrogen chloride.
    1. It turns litmus paper from blue to red.
    2. It turns methyl orange from yellow to pink.
    3. It reacts with metals to form their respective chlorides and liberates hydrogen.
    4. It reacts with bases to form their respective chlorides and water.
    5. It combines with carbonates and hydrogen carbonates to form their respective chlorides and liberate carbon dioxide.
    6. Hydrochloric acid is used in the production of dyes, drugs, paints, photographic chemicals and in the preparation of aqua-regia for dissolving metals like gold and platinum. 

9. Nitric Acid(HNO3):

  • Nitric acid is produced in large quantities in the atmosphere during thunder storms. It is manufactured by the Ostwald’s Process by the reaction of ammonia and air in presence of platinum as catalyst at 700-800º C.
  • Nitric acid is colourless in pure form. Commercial nitric acid is yellowish due to the presence of dissolved nitrogen dioxide.
  • Pure nitric acid is not very stable. Even at ordinary temperature, in presence of sunlight it undergoes slight decomposition. As the temperature increases, the rate of decomposition also increases. On strong heating it decomposes completely to give nitrogen dioxide, water and oxygen.
  • Nitric acid is a strong monobasic acid. It ionizes in water readily.
  • Nitric acid usually does not behave as an acid, with metals to form the corresponding salt and liberate hydrogen. However, magnesium and manganese are the only two metals, which react with cold and very dilute (1%) nitric acid to evolve hydrogen.
  • Nitric acid is a strong oxidizing agent. When it undergoes thermal decomposition, it yields nascent oxygen 

10. Sodium(Na):

  • Sodium belongs to Group I in the periodic table. This group is otherwise known as the alkali metals group. Since the atomic number of sodium is 11, its electronic configuration is 2,8,1. Sodium easily loses the lone electron to attain the stable configuration of neon. Therefore alkali metals like sodium that are univalent can easily form ionic compounds.
  • Since alkali metals like sodium are highly electropositive (tendency to lose an electron and become a cation), their carbonates and bicarbonates are highly stable to the action of heat.
  • Some of the important sodium compounds are:
    1. Sodium Carbonate (Na2CO3): Popularly known as washing soda or soda ash, sodium carbonate is a commercially important compound.
    (a) Transparent crystalline solid with ten molecules of water per molecule.
    (b) Soluble in water.
    (c) Washing soda solution is alkaline due to hydrolysis.
    (d) Has detergent or cleansing properties.
    (e) Sodium carbonate is used as washing soda in laundry as a cleansing agent, for softening hard water, in manufacturing glass, paper, soap and caustic soda.
    2. Sodium Bicarbonate (NaHCO3): Sodium bicarbonate is commonly called baking soda. Sodium bicarbonate is prepared in the laboratory by saturating a cold solution of sodium carbonate with carbon dioxide.
    (a) Sodium bicarbonate separates as white crystals. This is because it is very sparingly soluble in water.
    (b) Sodium bicarbonate is sparingly soluble in water.
    (c) Used in the preparation of carbon dioxide.
    (d) Used as a constituent of baking powder, and in effervescent drinks. Baking powder has sodium bicarbonate and tartaric or citric acid. When it is dissolved in water or heated carbon dioxide is produced. This carbon dioxide gas causes the puffiness and lightness of cakes, biscuits etc.
    (e) Sodium bicarbonate is used to extinguish fire as it produces carbon dioxide gas. 

11. Calcium(Ca):

  • The elements of Group II like calcium are called the alkaline earth metals. The atomic number of calcium is 20 and its configuration is 2,8,8,2. Calcium loses two electrons and becomes Ca2+ ion with the stable configuration of argon. Calcium is therefore bivalent in nature. Some of the important calcium compounds:
    1. Bleaching Powder (CaOCl2): 
    (a) Calcium oxychloride is the chemical name of bleaching powder.
    (b) Passing chlorine gas over dry slaked lime (Ca(OH)2), gives bleaching powder.
    (c) It is soluble in water. The lime present is always left behind as an insoluble salt. For this reason it is also called chloride of lime.
    (d) Bleaching powder is commonly used for bleaching clothes. It is also used in bleaching wood pulp in the paper industry, to disinfect drinking water, to manufacture of chloroform (CHCl3), an anaesthetic
    2. Plaster of Paris (CaSO4)2.H2O: Chemically, plaster of paris is known as calcium sulphate hemihydrate (hemi means half). When gypsum is heated to 120ºC, it loses 75% of its water of crystallization to form plaster of Paris. It is a white powder. When mixed with water, it forms a plastic mass. After about half an hour, this mass sets into a hard solid mass constituting interlaced gypsum crystals. Plaster of Paris is used to set fractured bones due to its setting property on hydration, as a sealant in laboratories, manufacture of blackboard chalk.
The document NCERT Summary: Summary of Chemistry- 5 | Science & Technology for UPSC CSE is a part of the UPSC Course Science & Technology for UPSC CSE.
All you need of UPSC at this link: UPSC
146 videos|358 docs|249 tests

Top Courses for UPSC

FAQs on NCERT Summary: Summary of Chemistry- 5 - Science & Technology for UPSC CSE

1. What are the important topics covered in Chemistry-5?
Ans. The important topics covered in Chemistry-5 include atomic structure, chemical bonding, states of matter, thermodynamics, and chemical kinetics.
2. How can I prepare effectively for the Chemistry-5 exam?
Ans. To prepare effectively for the Chemistry-5 exam, it is important to thoroughly study the NCERT textbook, practice solving numerical problems, create concise notes, and revise regularly. Additionally, solving previous year's question papers and taking mock tests can also help in familiarizing oneself with the exam pattern and enhancing time management skills.
3. Can you provide some tips to understand atomic structure better?
Ans. Understanding atomic structure better can be done by visualizing the arrangement of subatomic particles (protons, neutrons, and electrons) in an atom using models or diagrams. It is also helpful to learn about the periodic table and how it relates to the electronic configuration of elements. Practicing numerical problems related to atomic structure can further strengthen the understanding of the topic.
4. What is the significance of chemical bonding in Chemistry-5?
Ans. Chemical bonding is of great significance in Chemistry-5 as it explains how atoms come together to form molecules and compounds. It helps us understand the stability, reactivity, and physical properties of different substances. The study of chemical bonding also provides insights into the formation and breaking of bonds during chemical reactions.
5. How can I improve my problem-solving skills in thermodynamics and chemical kinetics?
Ans. To improve problem-solving skills in thermodynamics and chemical kinetics, it is important to have a clear understanding of the underlying concepts and equations. Regular practice of numerical problems, including those from the textbook exercises and additional reference books, can enhance proficiency in solving problems related to these topics. Seeking clarification from teachers or peers for any doubts or difficulties can also be helpful.
146 videos|358 docs|249 tests
Download as PDF
Explore Courses for UPSC exam

Top Courses for UPSC

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Free

,

pdf

,

Semester Notes

,

Previous Year Questions with Solutions

,

practice quizzes

,

NCERT Summary: Summary of Chemistry- 5 | Science & Technology for UPSC CSE

,

NCERT Summary: Summary of Chemistry- 5 | Science & Technology for UPSC CSE

,

video lectures

,

Important questions

,

Exam

,

study material

,

MCQs

,

mock tests for examination

,

Viva Questions

,

Extra Questions

,

Objective type Questions

,

shortcuts and tricks

,

NCERT Summary: Summary of Chemistry- 5 | Science & Technology for UPSC CSE

,

Sample Paper

,

Summary

,

past year papers

,

ppt

;