UPSC Exam  >  UPSC Notes  >  Management Optional Notes for UPSC  >  Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC PDF Download

Fixed Overheads Variances

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC(i) Total Fixed Overheads Variance (FOV) is difference between the standard Fixed Overheads specified for the output achieved and the actual fixed overheads.
FOV = Standard Fixed Overheads for standard Hours - Actual Fixed Overheads for Actual Hours
= (SH x SR) - (AH x AR)
When the actual overheads are less than the standard overheads then the fixed overheads variance is favourable and when the actual overheads are more than the standard overheads then the fixed overheads variance is adverse.
This variance is caused by the variations in the volume of actual production and the amount of fixed expenses actually incurred. Therefore, it is classified into -

  • Volume Variance and
  • Expenditure Variance

(ii) Fixed Overheads volume variance (FVV) is the portion of the total fixed overheads variance due to the difference between the standard volume of output and the budgeted volume of output.
FVV= (Standard Hours - Budgeted Hours) x Standard Rate
= (SH - BH) x SR
When the budgeted hours are less than the standard hours then the Fixed Overheads variance is favourable and when the budgeted hours are more than the standard hours then the fixed overheads variance is adverse it is further divided into

  • Fixed Overheads Efficiency Variance
  • Fixed Overheads Capacity Variance

(iii) Fixed Overheads Expenditure Variance - (FEV) - is the portion of total fixed overheads variance due to the difference between the budgeted expenditure specified and the actual expenditure.
FEXV = Budgeted Fixed Overheads for Budgeted Hours - Actual Fixed Overheads for Actual Hours
= (BH x SR) - (AH x AR)
When the actual fixed overheads are less than the budgeted fixed overheads then fixed overheads expenditure variance is favourable and vice versa.
(iv) Fixed Overheads Efficiency variance (FEFV) is the portion of fixed overheads volume variance, due to the difference between the standard volume of output specified and the actual volume of output.
FEFV= (Standard Hours - Actual Hours) x Standard Rate
= (SH - AH) x SR
When the actual hours are less than the standard hours then the fixed overheads efficiency variance is favourable and when the actual hours are more than the standard hours then the fixed overheads efficiency variance is adverse.
(v) Fixed overheads Capacity variance (FCPV) - is the portion of fixed overheads volume variance, due to the difference between the actual volume of output specified and the budgeted volume of output.
FCPV= (Actual Hours - Budgeted Hours) x Standard Rate
= (AH - BH) x SR
When the actual hours are less than the budgeted hours then the fixed overheads capacity variance is favourable and when the actual hours are more than the budgeted hours then the fixed overheads capacity variance is adverse.
Varification:
FOV = FVV + FEV
FVV = FEFV + FCPV

Question for Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2
Try yourself:
What is the formula for calculating the Fixed Overheads Variance (FOV)?
View Solution

Variable Overheads Variances 

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

(i) Total Variable Overheads Variances (VOV) is the difference between the standard variable overheads specified for the output achieved and the actual variable overheads.
VOV = Standard Variable Overheads for Standard Hours - Actual Variable Overheads for Actual Hours
= (SH x SR) - (AH x AR)
When the actual overheads are less than the standard overheads then the variable overheads variance is favourable and when the actual overheads are more than the standard overheads then the variable overheads variance is adverse it is further classified as -

  • Efficiency Variance
  • Expenditure Variance

(ii) Variable Overheads Efficiency Variances (VEFV) - is the portion of the total variable overheads variance, due to the difference between the standard volume of output specified and the actual volume of output.
VEFV = (Standard Hours - Actual Hours) x Standard Rate
= (SH - AH) x SR
When the actual hours are less than the standard hours then variable overheads efficiency variance is favourable and when the actual hours are more than the standard hours then the variable overheads efficiency variance is adverse.
(iii) Variable Overheads Expenditure Variance (VEXV) is the portion of variable overheads variance due to the difference between the recovered expenditure and the actual expenditure.
VEXV = (Standard Rate - Actual Rate )x Actual Hours
= (SR - AR )x AH
When the actual variable overheads are less than the recovered variable overheads then the variable overheads expenditure variance is favourable and when the actual variable overheads are more than the recovered variable overheads then the variable overheads expenditure variance is adverse.
Verification: VOV = VEFV + VEXV

Examples

Example 1: Material Variances: From the following particulars in respect of a product ‘x’ in which raw materials ‘A’ and ‘B’ are used, calculate.
i) MCV, ii) MPV, iii) MUV, iv) MMV v) MYV
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSCAns:

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC 
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

MCV = (SQ x SP) - (AQ x AP)

A = (121.33 x 10) - (140 x 9.50)
= 1213.3 - 1330 = 116.70 (A)

B = (80.89 x7.50) - (60 x 9)
= 606.68 - 540 = 66.68 (F)
MCV = A + B
= 116.70 (A) + 66.68 (F)
MCV = 50.02 (A)
MPV = (SP - AP) x AQ
A =(10 - 9.50) x 140
= 0.50 x 140
= 70(F)

B = (7.50 - 9.00) x 60
= (1.50) x 60
= 90 ( A )
MPV = A + B
= 70 (F) + 90 (A)
MPV = 20 (A)
MUV = (SQ - AQ) x SP
A =(121.33 -140) x 10
= (18.67) x 10
= 186.7 (A)
B = (80.89 - 60) x 7.50
= 20.89 x7.50
= 156.68 (F)
MUV = A + B
= 186.70 (A) +156.68 (F)
MUV = 30.02 (A)
MYV = ( SQ - RQ )x SP
A =(121.33 -120) x 10
= 1.33 x 10 = 13.3 (F)
B = (80.89 - 80) x 7.50
= 0.89 x7.50
= 6.68 (F)
MYV = A + B
= 13.3 (F) + 6.68 (F)
= 19.98 (F)
MMV = (RQ - AQ) x SP
A =(120 -140) x 10
= ( 20) x 10
= 200(A)
B = (80 - 60) x 7.50
= 20 x7.50
= 150(F)
MMV = A + B
= 200 (A) + 150 (F)
= 50 ( A )
Verification,
MCV = MPV + MUV
50.00 (A) = 20 (A) + 30.02 (A)
50.02 (A) = 50.02 (A)
MUV = MYV + MMV
30.02 (A) = 19.98 (F) + 50 (A)
30.02 (A) = 30.02 (A)

Example 2: Labour Variances: The following details are available from the records of xyz Co, engaged in manufacturing Article x for the month ended on April, 2014.
The standard labour hours and rates of payment were as follows:

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSCThe actual production was 1000 articles ‘x’ for which the actual hours worked and rates are given below:
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSCAns: Standard given for a single product and actual data given for 1000 articles.
∴ Standard also take for 1000 articles
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

LCV = (SH x SR) - (AH x AR)
A =(10000 x 3) - (9000 x 4)
= 30000 - 36000 = 6000(A)
B = (8000 x 1.50) - (8400 x 1.50)
= 12000 -12600 = 600(A)
C = (16000 x 1) - ( 20000 x 0.90)
= 16000 -18000 = 2000(A)
LCV = A + B + C
= 6000 (A) + 600 (A) + 2000 (A) = 8600(A)
LEV = ( SH - AH) x SR
A = (10000 - 9000) x 3 = 1000 x 3 = 3000(F)
B = (8000 - 8400) x 1.50 = (400) x 1.50 = 600(A)
C =(16000 - 20000) x 1 = (4000) x 1 = 4000(A)
LEV = A + B + C
= 3000 (F) + 600 (A) + 4000 (A) = 1600(A)
LRV = (SR - AR)x AH
A =(3 - 4)x 9000 = (l)x 9000 = 9000(A)
B =(1.50 -1.50) x 8400 = 0 x 8400 = NIL
C =(1 - 0.90) x 20000 = 0.10 x 20000 = 2000(F)
LRV = A + B + C
= 9000 (A) + NIL + 2000 (F)
= 7000(A)
LYV = (SH - RH) x SR
A =(10000 -11000) x 3 = (1000) x 3 = 3000(A)
B =(8000 - 8800)x 1.50 = (800) x 1.50 = 1200 (A)
C =(16000 -17600) x 1 = (1600) x 1 = 1600 (A)
LYV = A + B + C
= 3000 (A) +1200 (A) +1600 (A) = 5800(A)
LMV = ( RH - AH )x SR A    =(11000 - 9000) x 3
= 2000 x 3 = 6000(F)
B = (8800 - 8400) x 1.50
= 400 x 1.50 = 600(F)
C =(17600 - 20000) x 1
= 2400 (A) x 1 = 2400 (A)
LMV = A + B + C
= 6000 (F) + 600 (F) + 2400 (A) = 4200(F)
Verification:
LCV = LEV + LRV
8600 (A) = 1600 (A) + 7000 (A)
8600 (A) = 8600 (A)
LEV = LYV + LMV
1600 (A) = 5800 (A) + 4200 (F)
1600 (A) = 1600 (A)

Example 3: Both Material & Labour Variances: The Standard Cost of a product Material Cost 2Kg @ Rs. 2.50 each Rs. 5 per unit Wages : 2 hours @ Rs. 1.00 each Rs. 2.00 per unit. The actual which have emerged from business operations are as follows : Production 8000 units Material Consumed 16500 Kg @ Rs. 2.40 each Rs. 39,600.
Wages paid 18000 hours @ Rs. 1.20 each Rs. 21600.
You are required to compute material and labour Variances.
Ans: 
Note: Standard is given for a product & the actual data is given for 8000 units. So the standard is also converted into 8000 units of production.
SQ = 2Kg per unit × 8000 = 16000 Kgs
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC
AQ = 16500
AP = 2.40
SH = 2 hours per unit × 8000 = 16000 hours
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC
MCV = (SQ x SP) - (AQ x AP)
= (16000 x 2.5)- (16500 x 2.40) = 40000 - 39600 = 400(F)
MPV = (SP - AP) x AQ
= (2.5 - 2.40) x 16500 = 0.10 x 16500 = 1650(F)
MUV = (SQ - AQ) x SP
= (16000 -16500) x 2.5 = (500) x 2.5 = 1250 ( A )
MCV = MPV + MUV
400 (F ) = 1650 (F) + 1250 (A)
400 (F ) = 400 (F)
LCV = (SH x SR) - (AH x AR)
= (16000 x 1)-(18000 x 1.20)
= 16000 - 21600 = 5600(A)
LEV = ( SH - AH) x SR
= (16000 -18000) x 1 = (2000) x 1 = 2000(A)
LRV = (SR - AR)x AH = (1 -1.20) x 18000 = (0.20) x 18000 = 3600(A)
LCV = LEV + LRV
5600 (A) = 2000 (A) + 3600 (A)
5600 (A) = 5600 (A)

Example 4: Fixed Overheads Variance: From the following information, compute fixed overhead cost, Expenditure and Volume Variance : Normal Capacity is 10000 hours, Budgeted Fixed Overhead Rate is Rs. 20 per Standard Hour.
Actual level of capacity utilised is 8800 standard hours. Actual fixed overhead is Rs. 104000
Ans: 
SH = 8800
Standard Overhead Rate (SR) = 20
Budgeted Hours (BH) = 10000
Actual Fixed Overhead (AFO) = 104000
FOV = (SH x SR)- AFO = (8800 x 20) - 104000 = 176000 -104000 = 72000(F)
Fixed Overheads Expenditure Variance FDEV = (BH x SR) - Actual FO
= (10000 x 20) - 104000 = 200000 - 104000 = 96000(F)
Fixed Overheads Volume Variance (FVV)
= Standard FO - Budgeted FO
= (8800 x 20) -(10000 x 20)
= 176000 - 200000
= 24000(A)
Verification:
FOV = FOEV + FVV
72000 (F) = 96000 (F) + 24000 (A)

Example 5: (Variable Overheads Variances) The following data is given
Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

The standard time to produce one unit of the product is 200 hours. Calculate variable overheads variances.
Ans: 

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC
Variable Overhead Variance (VOV)
= (SH x SR)-(AH x AR)
= {72000 x 1.255)-(70000 x 1.307)
= 90000 - 91500 = 1500(A)
Variable Overhead Efficiency Variance (VEFV)
= ( SH - AH) x SR
= {72000 - 70000) x 1.25 = 2000 x 1.25 = 2500(F)
Variable Overhead Expenditure Variance (VEXV)
= ( SR - AR) x AH
= {1.25 -1.307) x 70000 = (0.057) x 70000 = 4000(A)
Verification:
VOV = VEFV + VEXV
1500 (A) = 2500 (F) + 4000 (A)
1500 (A) = 1500 (A)

Advantages of Standard Costing

The advantages of Standard Costing are as follows:

  • Cost Control, Reduction, and Increased Profitability: Analysis of variances is beneficial for cost control, cost reduction, and enhancing profitability. It allows businesses to identify areas of inefficiency and take corrective actions.
  • Incentive and Motivation: Standards provide incentives and motivation for workers. Employees strive to achieve the set standards, leading to increased efficiency and productivity.
  • Prompt Availability of Cost Information: Cost information is readily available under the standard costing system. The promptness of cost information is advantageous for various aspects of costing, such as fixing selling prices and valuing work in progress.
  • Contribution to Budgetary Control and Decision Making: Standard costing contributes to budgetary control, helping in the planning and monitoring of budgets. It also aids in decision-making processes by providing relevant cost information.
  • Balancing Profits through Valuation of Stock: The valuation of opening and closing stock at standard prices helps balance profits. This enables the preparation of the Profit & Loss Account at regular intervals as needed.

Limitation / Disadvantages of Standard Costing

The disadvantages of Standard Costing include:

  • Difficulty in Setting Standards: Establishing standards is a challenging task. What serves as a standard for one individual may not be suitable for another. Setting current standards can be particularly difficult, and standards may vary among different individuals.
  • Rigidity and Unrealistic Nature of Standards: Once set, standards typically remain unchanged for a significant period. This rigidity can be problematic in industries facing fluctuations in product pricing due to frequent changes in material and labor costs. Revising standards is not easy and can be costly.
  • Challenges with Setting Appropriate Standards: Setting standards too low may lead to ridicule, while setting them too high can cause frustration and disbelief among workers. Striking the right balance in setting standards is crucial but challenging.
  • Limited Applicability for Small Manufacturers: Standard costing is not widely used by small manufacturers, who form a substantial portion of businesses. The method may be perceived as impractical or resource-intensive for smaller enterprises.
  • Complexity in Multi-Period Production: Applying standard costing becomes challenging when production spans more than one accounting period. Managing standards over extended production periods introduces complexities in the application of this costing method.

Distinguish between Standard Costing & Budgetary Control

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSCCosting and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

The document Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC is a part of the UPSC Course Management Optional Notes for UPSC.
All you need of UPSC at this link: UPSC
258 docs

Top Courses for UPSC

FAQs on Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 - Management Optional Notes for UPSC

1. What are the advantages of standard costing?
Ans. Standard costing offers several advantages, including: - Cost control: Standard costing provides a benchmark for comparing actual costs with standard costs, helping companies identify and control any variances. - Performance evaluation: By comparing actual costs with standard costs, standard costing enables companies to evaluate the performance of different departments or individuals. - Decision-making: Standard costing provides reliable cost data that can be used for making informed decisions, such as pricing, product mix, and outsourcing. - Cost estimation: Standard costing allows companies to estimate costs for budgeting and forecasting purposes, providing a basis for effective financial planning. - Continuous improvement: By analyzing variances between actual and standard costs, companies can identify areas for improvement and implement cost-saving measures.
2. What are the limitations of standard costing?
Ans. Despite its advantages, standard costing has some limitations, including: - Reliance on historical data: Standard costs are based on historical data, which may not accurately represent current market conditions or production methods. - Lack of flexibility: Standard costing assumes a static environment and may not account for changes in technology, customer preferences, or economic factors. - Variance analysis complexity: Analyzing and interpreting variances between actual and standard costs can be complex and time-consuming, requiring skilled personnel and resources. - Overemphasis on cost reduction: Standard costing may lead to a myopic focus on cost reduction, potentially neglecting other important aspects such as quality, customer satisfaction, and innovation. - Unrealistic standards: Setting unattainable or outdated standards can demotivate employees and undermine the credibility of the standard costing system.
3. How does standard costing differ from budgetary control?
Ans. Standard costing and budgetary control are both cost management techniques, but they differ in their focus and scope: - Standard costing primarily focuses on comparing actual costs with pre-determined standard costs to control and evaluate performance at a detailed level, such as individual products or processes. - Budgetary control, on the other hand, focuses on setting and monitoring budgets at a broader level, such as departments, divisions, or the entire organization. It involves comparing actual results with budgeted figures to control expenses and allocate resources effectively. - While standard costing is more concerned with cost control and analyzing variances, budgetary control is broader and encompasses various financial aspects, including revenue, expenses, and capital allocation. - Standard costing provides a more detailed analysis of cost deviations, whereas budgetary control provides an overview of overall financial performance against budgeted targets.
4. How can standard costing be used for performance evaluation?
Ans. Standard costing is commonly used for performance evaluation by comparing actual costs with standard costs. This evaluation can be done at different levels, such as departments, products, or individuals. Some key steps involved in using standard costing for performance evaluation are: - Establishing standard costs: Standard costs are predetermined costs based on historical data and other relevant factors. These costs serve as benchmarks for evaluating performance. - Recording actual costs: Actual costs are recorded for each cost element, such as direct materials, direct labor, and overhead. - Calculating cost variances: Variance analysis is conducted by comparing actual costs with standard costs. Favorable variances indicate that costs are lower than expected, while unfavorable variances indicate higher costs. - Investigating variances: Variances are analyzed to identify the reasons behind them. This investigation helps in understanding the factors contributing to the deviations from standard costs. - Taking corrective actions: Based on the analysis of variances, appropriate corrective actions can be taken to address any significant deviations and improve future performance.
5. How does standard costing contribute to decision-making?
Ans. Standard costing provides valuable cost data that can support decision-making in various areas, such as pricing, product mix, and outsourcing. Here's how standard costing contributes to decision-making: - Pricing decisions: Standard costing provides a basis for determining product prices by incorporating standard costs, desired profit margins, and market factors. It helps companies ensure that prices cover costs and generate a reasonable profit. - Product mix decisions: By comparing the profitability of different products based on standard costs, companies can make informed decisions about the product mix. They can allocate resources and prioritize products that contribute the most to profitability. - Make-or-buy decisions: Standard costing allows companies to compare the costs of producing a component or service in-house versus outsourcing it. This analysis helps in determining the most cost-effective option. - Capital investment decisions: Standard costing can be used to estimate the costs and profitability of potential investments. It provides insights into the financial viability of projects and assists in selecting the most profitable investments. - Cost reduction decisions: Standard costing highlights cost variances and identifies areas for improvement. This information can guide decision-making on cost-saving initiatives, process improvements, and efficiency enhancements.
258 docs
Download as PDF
Explore Courses for UPSC exam

Top Courses for UPSC

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

past year papers

,

Exam

,

Extra Questions

,

Sample Paper

,

practice quizzes

,

Semester Notes

,

Previous Year Questions with Solutions

,

Summary

,

ppt

,

Viva Questions

,

pdf

,

MCQs

,

Free

,

Objective type Questions

,

shortcuts and tricks

,

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

,

mock tests for examination

,

video lectures

,

Important questions

,

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

,

study material

,

Costing and Budgetary Control Methods: Standard Costing and Variance Analysis - 2 | Management Optional Notes for UPSC

;