NEET Exam  >  NEET Notes  >  Physics Class 12  >  Extrinsic Semiconductor: N-type & P-type Semiconductors

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET PDF Download

N-Type Semiconductor

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

  • Mainly due to electrons
  • Entirely neutral
  • I = Ih and nh >> ne
  • Majority – Electrons and Minority – Holes
  • When a pure semiconductor (Silicon or Germanium) is doped by pentavalent impurity (P, As, Sb, Bi) then, four electrons out of five valence electrons bonds with the four electrons of Ge or Si.
  • The fifth electron of the dopant is set free. Thus, the impurity atom donates a free electron for conduction in the lattice and is called “Donar“.
  • Since the number of free electron increases by the addition of an impurity, the negative charge carriers increase. Hence, it is called n-type semiconductor.
  • Crystal as a whole is neutral, but the donor atom becomes an immobile positive ion. As conduction is due to a large number of free electrons, the electrons in the n-type semiconductor are the majority carriers and holes are the majority carriers.

P-Type Semiconductor

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET


  • Mainly due to holes
  • Entirely neutral
  • I = Ih and nh >> ne
  • Majority – Holes and Minority – Electrons
  • When a pure semiconductor is doped with a trivalent impurity (B, Al, In, Ga ) then, the three valence electrons of the impurity bonds with three of the four valence electrons of the semiconductor.
  • This leaves an absence of electron (hole) in the impurity. These impurity atoms which are ready to accept bonded electrons are called “Acceptors“.
  • With the increase in the number of impurities, holes (the positive charge carriers) are increased. Hence, it is called p-type semiconductor.
  • Crystal as a whole is neutral, but the acceptors become an immobile negative ion. As conduction is due to a large number of holes, the holes in the p-type semiconductor are majority carriers and electrons are majority carriers.

Table: Difference between N-type and P-type semiconductors

S.No.

N-type semiconductors

P-type semiconductors

1.

In these the impurity of some pentavalent element like P, As, Sb, Bi, etc. is mixed

In these, the impurity of some trivalent element like b, Al, In, Ga etc. is mixed

2.

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

3.

in these the impurity atom donates one electrons, hence these are known as donor type semiconductors

In these, the impurity atom can accept one electron, hence these are known as acceptor type semiconductors.

4.

In these the electrons are majority current carriers and holes are minority current carriers, (i.e. the electron density is more than hole density n>> np)

In these the holes are majority current carriers and electrons are minority current carriers i.e. np >> nn

5.

In these there is majority of negative particles (electrons) and hence are known as N-type semiconductors

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

In these there is majority of positive particles (cotters) and hence are known as P-type semiconductors.

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

6.

in these the donor energy level is close to the conduction band and far away from valence band.

In these the acceptor energy level is close to the valence band and far away from conduction band.

P N Junction Formation 

(a) The device formed by joining atomically a wafer of P-type semiconductor to the wafer of N-type semiconductor is known as P-N junction.

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(b)There are three processes of making junctions

(i) Diffusion

(ii) Alloying

(iii) Growth

In majority of cases P-N junction is formed by diffusion process. The impurity concentration is maximum at surface and decreases gradually inside the semiconductor.

(c) Conduction of current in P-N Junction:

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(i) In P-N junction the majority cotters in P-region and majority electrons in N-region start diffusing due to concentration gradient and thermal disturbance towards N-region and P-region respectively and combine respectively with electrons and cotters and become neutral.

(ii) In this process of neutralization there occurs deficiency of free current carriers near the junction and layers of positive ions in N-region and negative ions in P-region are formed. These ions are immobile. Due to this an imaginary battery or internal electric field is formed at the junction which is directed from N to P.

(a) The region on both sides of P-N junction in which there is deficiency of free current carriers, is known as the depletion layer.

(b) Its thickness is of the order of 1 micro m (= 10–6)

(c) On two sides of it, there are ions of opposite nature. i.e. donor ion (+ve) on N-side and acceptor ions (–ve) on P-side.

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(d) This stops the free current carriers to crossover the junction and consequently a potential barrier is formed at the junction.

(e) The potential difference between the ends of this layer is defined as the contact potential or potential barrier (VB).

(f) The value of VB is from 0.1 to 0.7 volt which depends on the temperature of the junction. It also depends on the nature of semiconductor and the doping concentration. For germanium and silicon its values are 0.3 V and 0.7 V respectively.

(h) Symbolic representation of diode:

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(ii) The direction of current flow is represented by the arrow head.

(iii) In equilibrium state current does not flow in the junction diode.

(iv) In can be presumed to be equivalent to a condenser in which the depletion layer acts as a dielectric.

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(v) Potential distance curve at P-N Junction

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(vi) Charge density curve at P-N Junction

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

(vii) Curve between electric field and distance near P-N junction

 

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

The document Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET is a part of the NEET Course Physics Class 12.
All you need of NEET at this link: NEET
98 videos|387 docs|104 tests

Top Courses for NEET

FAQs on Extrinsic Semiconductor: N-type & P-type Semiconductors - Physics Class 12 - NEET

1. What is an N-type semiconductor?
An N-type semiconductor is a type of extrinsic semiconductor that is doped with impurities, such as phosphorus or arsenic, which introduce free electrons into the semiconductor crystal structure. This creates an excess of negatively charged electrons, hence the name "N-type."
2. What is a P-type semiconductor?
A P-type semiconductor is also an extrinsic semiconductor but is doped with impurities like boron or gallium, which introduce "holes" or positively charged carriers into the semiconductor crystal structure. This creates an excess of positively charged carriers, thus the name "P-type."
3. How is a P-N junction formed?
A P-N junction is formed when a P-type semiconductor is brought into contact with an N-type semiconductor. The resulting interface between the two regions forms a depletion region, where the free electrons from the N-side combine with the holes from the P-side, creating a region devoid of carriers.
4. What are the characteristics of an extrinsic semiconductor?
Extrinsic semiconductors, including N-type and P-type semiconductors, have impurities intentionally added to alter their electrical properties. These impurities introduce either free electrons or holes into the semiconductor crystal, resulting in the conductivity of the material being significantly increased.
5. How do N-type and P-type semiconductors contribute to electronic devices?
N-type and P-type semiconductors are essential components in electronic devices. N-type semiconductors are commonly used as the conducting material in transistors or as the substrate for integrated circuits. P-type semiconductors, on the other hand, are used to create the base or emitter regions in transistors, as well as the anode of diodes. The combination of N-type and P-type semiconductors in a P-N junction enables the creation of various electronic devices and circuits.
98 videos|387 docs|104 tests
Download as PDF
Explore Courses for NEET exam

Top Courses for NEET

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

MCQs

,

shortcuts and tricks

,

practice quizzes

,

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

,

ppt

,

Summary

,

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

,

study material

,

Viva Questions

,

Extrinsic Semiconductor: N-type & P-type Semiconductors | Physics Class 12 - NEET

,

Extra Questions

,

Previous Year Questions with Solutions

,

Important questions

,

Semester Notes

,

video lectures

,

Free

,

past year papers

,

pdf

,

Sample Paper

,

Exam

,

Objective type Questions

,

mock tests for examination

;