When does a resistance provide a negative feedback to an amplifier?

Resistance is connected between the positive input terminal and the output terminal

Resistance is connected between the negative input terminal and the output terminal

Resistance is connected between the input terminals

Resistance is connected between the negative input terminal and ground

The effect of the inverting configuration is

The output signal and the input signal are out of phase by 180 o

The output signal and the input signal are in phase

The output phase is leading the input phase by 90 o

The output phase is lagging behind the input phase by 90 o

For an ideal negative feedback configuration which of the following is true?

There is a virtual open circuit between the input terminals

The closed loop gain for a negative feedback does not depend only on the external parameters

There is a virtual short circuit between the input terminals

There is a virtual ground at the negative input terminal

The negative feedback causes

The voltage between the two input terminals to the very small, ideally zero

The voltage between the two input resistance very high, ideally infinite

Current flow through the positive input terminal and no current flows through the negative input terminal

The non-inverting closed loop configuration features a high resistance. Therefore in many cases unity gain follower called buffer amplifier is often used to

Connect a high resistance source to high resistance load

Connect low resistance source to low resistance load

Connect low resistance source to a high resistance source

Connect high resistance source to a low resistance load

The advantage of a weighted summer operational amplifier is

It is capable of summing various input voltages together

Each input signal may be independently adjusted by adjusting the corresponding input resistance

If one needs both sign of a voltage signal then two operational amplifiers are needed

The following is a circuit of weighted summer capable of summing coefficients of both sign. The expressions for the output voltage v 0 is

v 0 = v 1 (R1/Ra ) (Rc/Rb ) + v 1 (Ra/R2 ) (Rc/Rb ) – v 1 (Rc/R3 ) – v 1 (Rc/R4 )

v 0 = – v 1 (R1/Ra ) (Rc/Rb ) – v 1 (Ra/R2 ) (Rc/Rb ) + v 1 (Rc/R3 ) + v 1 (Rc/R4 )

v 0 = v 1 (Ra/R1 ) (Rc/Rb ) + v 1 (Ra/R2 ) (Rc/Rb ) – v 1 (Rc/R3 ) – v 1 (Rc/R4 )

v 0 = – v 1 (Ra/R1 ) (Rc/Rb ) – v 1 (Ra/R2 ) (Rc/Rb ) + v 1 (Rc/R3 ) + v 1 (Rc/R4 )

In the non-inverting configuration of operational amplifier

The positive terminal is connected to the ground directly

The negative terminal is connected to the ground directly

The positive terminal is connected to the power source

The negative terminal is connected to the power source

For ideal non-inverting operational amplifier

Input and output resistances are infinite

Input resistance is infinite and output resistance is zero

Input resistance is zero and output resistance is infinite

Input and output resistances are zero

Which of the following is not true for a voltage follower amplifier?

Input voltage is equal to output voltage

Input resistance is infinite and output resistance is zero

For designing a non-inverting amplifier with a gain of 2 at the maximum output voltage of 10 V and the current in the voltage divider is to be 10 μA the resistance required are R 1 and R 2 where R 2 is used to provide negative feedback. Then

R 1 = 0.5 MΩ and R 2 = 0.5 MΩ

R 1 = 0.5 kΩ and R 2 = 0.5 kΩ

It is required to connect a transducer having an open-circuit voltage of 1 V and a source resistance of 1 MΩ to a load of 1-kΩ resistance. Find the load voltage if the connection is done

0.1 μV and 0.1 mV respectively

The Inverting Configuration and The Non Inverting Configuration Free MCQ Practice Test with Solutions

EduRev

All Courses

Open App

Important Questions for The Inverting Configuration & The Non Inverting Configuration

Find all the important questions for The Inverting Configuration & The Non Inverting Configuration at EduRev.Get fully prepared for The Inverting Configuration & The Non Inverting Configuration with EduRev's comprehensive question bank and test resources. Our platform offers a diverse range of question papers covering various topics within the The Inverting Configuration & The Non Inverting Configuration syllabus. Whether you need to review specific subjects or assess your overall readiness, EduRev has you covered. The questions are designed to challenge you and help you gain confidence in tackling the actual exam. Maximize your chances of success by utilizing EduRev's extensive collection of The Inverting Configuration & The Non Inverting Configuration resources.

The Inverting Configuration & The Non Inverting Configuration MCQs with Answers

Prepare for the The Inverting Configuration & The Non Inverting Configuration within the Electrical Engineering (EE) exam with comprehensive MCQs and answers at EduRev. Our platform offers a wide range of practice papers, question papers, and mock tests to familiarize you with the exam pattern and syllabus. Access the best books, study materials, and notes curated by toppers to enhance your preparation. Stay updated with the exam date and receive expert preparation tips and paper analysis. Visit EduRev's official website today and access a wealth of videos and coaching resources to excel in your exam.

Online Tests for The Inverting Configuration & The Non Inverting Configuration

Practice with a wide array of question papers that follow the exam pattern and syllabus. Our platform offers a user-friendly interface, allowing you to track your progress and identify areas for improvement. Access detailed solutions and explanations for each test to enhance your understanding of concepts. With EduRev's Online Tests, you can build confidence, boost your performance, and ace The Inverting Configuration & The Non Inverting Configuration with ease. Join thousands of successful students who have benefited from our trusted online resources.

Education Revolution