Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  Test: Highway Materials, Construction & Maintenance - Civil Engineering (CE) MCQ

Test: Highway Materials, Construction & Maintenance - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test - Test: Highway Materials, Construction & Maintenance

Test: Highway Materials, Construction & Maintenance for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Test: Highway Materials, Construction & Maintenance questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Highway Materials, Construction & Maintenance MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Highway Materials, Construction & Maintenance below.
Solutions of Test: Highway Materials, Construction & Maintenance questions in English are available as part of our course for Civil Engineering (CE) & Test: Highway Materials, Construction & Maintenance solutions in Hindi for Civil Engineering (CE) course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Highway Materials, Construction & Maintenance | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Highway Materials, Construction & Maintenance - Question 1

In CBR test the value of CBR is calculated at

Detailed Solution for Test: Highway Materials, Construction & Maintenance - Question 1

In CBR test the value of CBR is calculated at both 2.5 mm and 5.0 mm penetration, Normally the CBR value at 2.5 mm penetration which is higher than that at 5.0 mm is reported as the CBR value of the material.

Test: Highway Materials, Construction & Maintenance - Question 2

Percentage of free carbon in bitumen is

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Highway Materials, Construction & Maintenance - Question 3

The ductility value of bitumen for suitability in road construction should not be less than

Detailed Solution for Test: Highway Materials, Construction & Maintenance - Question 3

Minimum ductility value of a normal bitumen should be greater than 50 cm.

Test: Highway Materials, Construction & Maintenance - Question 4

RC-2, MC-2 and SC-2 correspond to

Detailed Solution for Test: Highway Materials, Construction & Maintenance - Question 4

The cutback with the lowest viscosity is designated by numeral 0, such as RC-0, MC-0 and SC-0, suffix numerals 0, 1, 2, 3, 4 and 5 designate progressively thicker or more viscous cutbacks as the numbers increase. This number indicates a definite viscosity irrespective of the type of cutback; in other words, RC-2, MC-2 and SC-2 all have the same initial viscosity.

Test: Highway Materials, Construction & Maintenance - Question 5

Matching List-I with List-ll and select the correct answer using the codes given below the lists:
List-I (Test on Bitumen)
A. Penetration test
B. Float test
C. Ring and Ball Test
D. Pensky-Martens Test

List-ll (Properties)
1. Fire point
2. Degree of hardness
3. Softening point
4. Consistency

Test: Highway Materials, Construction & Maintenance - Question 6

In CBR test surcharge weights are used to

Test: Highway Materials, Construction & Maintenance - Question 7

 Match List-I with Llst-ll and select the correct answer using the code given below the lists:
List-I
A. Penetration test
B. Marshall test
C. Ring and ball test
D. Benkelman bearn test

List-ll
1. Design of bituminous concrete mix
2. Overlay design
3. Gradation of asphalt cement
4. Determination of softening point

Test: Highway Materials, Construction & Maintenance - Question 8

The result of ring and ball softening point test on asphalt is given in terms of

Test: Highway Materials, Construction & Maintenance - Question 9

The temperature to be maintained for the determination of the penetration value of bitumen is

Detailed Solution for Test: Highway Materials, Construction & Maintenance - Question 9

The penetration test determines the hardness or softness of bitumen by measuring the depth in tenths of a millimetre to which a standard loaded needle will penetrate vertically in five seconds. The sample is maintained at a temperature of 25°C.

Test: Highway Materials, Construction & Maintenance - Question 10

In highway pavements emulsions are mainly used in

Detailed Solution for Test: Highway Materials, Construction & Maintenance - Question 10

A bitumen emulsion is liquid product in which a substantial amount of bitumen is suspended in a finely divided condition in an aqueous medium and stabilized by means of one more suitable materials. The function of this emulsifier is to form a protective coating around the globules of binder resisting the coalescence of the globules.

Information about Test: Highway Materials, Construction & Maintenance Page
In this test you can find the Exam questions for Test: Highway Materials, Construction & Maintenance solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Highway Materials, Construction & Maintenance, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)