Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  Test: Miscellaneous - 1 - Civil Engineering (CE) MCQ

Test: Miscellaneous - 1 - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test - Test: Miscellaneous - 1

Test: Miscellaneous - 1 for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Test: Miscellaneous - 1 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Miscellaneous - 1 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Miscellaneous - 1 below.
Solutions of Test: Miscellaneous - 1 questions in English are available as part of our course for Civil Engineering (CE) & Test: Miscellaneous - 1 solutions in Hindi for Civil Engineering (CE) course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Miscellaneous - 1 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Miscellaneous - 1 - Question 1

The relation between modulus of rupture fcr, splitting strength fcs and direct tensile strength fct is given by

Detailed Solution for Test: Miscellaneous - 1 - Question 1

The approximate relations are,
fcs  = 0.66 fcr
fct = 0.50 fcr

Test: Miscellaneous - 1 - Question 2

As compared to working stress method of design, limit state method takes concrete to

Detailed Solution for Test: Miscellaneous - 1 - Question 2

The material factor of safety in limit state method is less as compared to that in working stress method.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Miscellaneous - 1 - Question 3

If the depth of neutral axis for a singly reinforced balanced rectangular section is represented by kd in working stress design, then the value of k for a balanced section, 

Detailed Solution for Test: Miscellaneous - 1 - Question 3

The value of k is given by,
k = mc/(t + mc)
For a balanced section,

Test: Miscellaneous - 1 - Question 4

Examine the following statements:
1. Factor of safety for steel should be based on its yield stress.
2. Factor of safety for steel should be based on its ultimate stress.
3. Factor of safety for concrete should be based on its yield stress.
4. Factor of safety for concrete should be based on its ultimate stress.
The correct statements are:

Detailed Solution for Test: Miscellaneous - 1 - Question 4

A beam collapses when stress is equal to its yield strength and stress in concrete reaches its ultimate strength.

Test: Miscellaneous - 1 - Question 5

What should be the minimum grade of reinforced concrete in and around sea coast construction?

Detailed Solution for Test: Miscellaneous - 1 - Question 5


Concrete in sea water or exposed directly along the sea coast shall be at least M20 grade in the case of plain concrete and M30 in case of reinforced concrete. The use of slag or pozzolana cement is advantageous under such conditions.

Test: Miscellaneous - 1 - Question 6

On which one of the following concepts is the basic principle of structural design based?

Detailed Solution for Test: Miscellaneous - 1 - Question 6

In tall, buildings, it is important to control lateral displacements within the serviceability limit state. A structural system may be classified as follows:
(i) Buildings frame system
(ii) Moment resisting frame system
(iii) Dual frame system
(iv) Tube system
In a moment resistant frame, the relative stiffness of beam and columns is very important. A frame may be designed using weak column-strong beam proportions or strong column - weak beam proportions. A frame with weak beam-strong column is more stable and therefore highly desirable.

Test: Miscellaneous - 1 - Question 7

When is a masonry wall known as a shear wall?

Detailed Solution for Test: Miscellaneous - 1 - Question 7

A wall which carries horizontal loads in its own plane is called shear wall.

Test: Miscellaneous - 1 - Question 8

A masonry wall has height ‘h' ,length L and thickness 't'. The allowable stress based or slenderness is calculated on the basis of

Detailed Solution for Test: Miscellaneous - 1 - Question 8

The slenderness ratio of a wall or column is defined as the ratio of effective height to its effective thickness. For a wall, the effective height is replaced by the effective length if effective height happens to be less.

Test: Miscellaneous - 1 - Question 9

As the span of a bridge increases, how does the impact factor vary?

Detailed Solution for Test: Miscellaneous - 1 - Question 9

Impact factor for RC bridges, I = 4.5/6 + L
where L is the length of span in meters.

Test: Miscellaneous - 1 - Question 10

At what stress does the first flexural crack appear in RCC beams made of M25 grade concrete?

Detailed Solution for Test: Miscellaneous - 1 - Question 10

Flexural strength of concrete is given by, 

= 0.7 x 5 = 3.5 MPa

Information about Test: Miscellaneous - 1 Page
In this test you can find the Exam questions for Test: Miscellaneous - 1 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Miscellaneous - 1, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)