Test: Dynamic of Fluid Flow - 2 - Mechanical Engineering MCQ
10 Questions MCQ Test - Test: Dynamic of Fluid Flow - 2
Venturimeter consists of following parts:
1. Diverging part
2. Throat
3. Main inlet pipe
4. Short converging part
Select the correct sequence of parts:
1. Diverging part
2. Throat
3. Main inlet pipe
4. Short converging part
The range for coefficient of discharge (Cd) for a venturimeter is
| 1 Crore+ students have signed up on EduRev. Have you? Download the App |
An orifice is known as large orifice when the head of liquid from the center of orifice is
In the siphon in figure below assuming ideal flow, the pressure PB
A siphon used to empty a tank consists essentially of a pipe with its summit 0.5 m above the water surface of the tank and its outlet at 2.5 m below the summit. Neglecting friction and other losses, the velocity in the siphon is
A pump delivers 100 L/s of water and delivers 15 kW of power to the system. The head developed by the pump is
In a hydropower project a turbine has a head of 50 m. The discharge in the feeding penstock is 3 m3/s. If a head loss of 5 m takes place due to losses, and a power of 1000 kW is extracted, the residual head downstream of the turbine is
Venturimeter is used to measure flow of fluids in pipes when pipe is
The length of divergent part of venturimeter in comparision to convergent portion is
All the terms of energy of Bernoulli’s equation have dimension of
Top Courses for Mechanical Engineering
Important Questions for Dynamic of Fluid Flow - 2
Dynamic of Fluid Flow - 2 MCQs with Answers
Online Tests for Dynamic of Fluid Flow - 2
|
© EduRev
|
Education Revolution
|
|
