Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  Test: Belt, Rope & Chain Drives - 2 - Mechanical Engineering MCQ

Test: Belt, Rope & Chain Drives - 2 - Mechanical Engineering MCQ


Test Description

10 Questions MCQ Test - Test: Belt, Rope & Chain Drives - 2

Test: Belt, Rope & Chain Drives - 2 for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Test: Belt, Rope & Chain Drives - 2 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The Test: Belt, Rope & Chain Drives - 2 MCQs are made for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Belt, Rope & Chain Drives - 2 below.
Solutions of Test: Belt, Rope & Chain Drives - 2 questions in English are available as part of our course for Mechanical Engineering & Test: Belt, Rope & Chain Drives - 2 solutions in Hindi for Mechanical Engineering course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt Test: Belt, Rope & Chain Drives - 2 | 10 questions in 30 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study for Mechanical Engineering Exam | Download free PDF with solutions
Test: Belt, Rope & Chain Drives - 2 - Question 1

The type of chain used in motor cycle is

Test: Belt, Rope & Chain Drives - 2 - Question 2

Which is correct statement about flexibility and endurance of ropes

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Belt, Rope & Chain Drives - 2 - Question 3

Wire ropes are used for applications experiencing

Detailed Solution for Test: Belt, Rope & Chain Drives - 2 - Question 3

Wire ropes are extensively used in hoisting, haulage and materia! handling equipment. They are also used in stationary applications such as guy wires and stays.

Test: Belt, Rope & Chain Drives - 2 - Question 4

Creep in belt drive is the result of

Detailed Solution for Test: Belt, Rope & Chain Drives - 2 - Question 4

Creep is a slight relative motion of the halt as it passes over the pulley. It results in a decrease in the angular velocity of the driven pulley from that calculated by considering the ratio of diameters of pulleys. The efficiency of the belt drive is reduced by 1 to 2 percent of a result of creep.

Test: Belt, Rope & Chain Drives - 2 - Question 5

The co-efficient of friction belween the belt material and the pulley surface is not affected by

Test: Belt, Rope & Chain Drives - 2 - Question 6

Which of the following belt material has maximum density?

Detailed Solution for Test: Belt, Rope & Chain Drives - 2 - Question 6

Test: Belt, Rope & Chain Drives - 2 - Question 7

The weight of rope in newtons per meter length is generally takes as
where d is the rope diameter in centimeter.

Test: Belt, Rope & Chain Drives - 2 - Question 8

A silent chain consists of

Detailed Solution for Test: Belt, Rope & Chain Drives - 2 - Question 8

A silent chain is also known as inverted tooth chain. It is designed to eliminate the evil effects caused by stretching and to produce noiseless running.

Test: Belt, Rope & Chain Drives - 2 - Question 9

The power capacity of a duplex chain is 'x' times the power capacity of a single chain. The value of x is

Test: Belt, Rope & Chain Drives - 2 - Question 10

In order to have smooth operation, the minimum number of teeth on the smaller sprocket, for moderate speeds, should be

Information about Test: Belt, Rope & Chain Drives - 2 Page
In this test you can find the Exam questions for Test: Belt, Rope & Chain Drives - 2 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Belt, Rope & Chain Drives - 2, EduRev gives you an ample number of Online tests for practice

Top Courses for Mechanical Engineering

Download as PDF

Top Courses for Mechanical Engineering