Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  Test: Cams - 2 - Mechanical Engineering MCQ

Test: Cams - 2 - Mechanical Engineering MCQ


Test Description

10 Questions MCQ Test - Test: Cams - 2

Test: Cams - 2 for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Test: Cams - 2 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The Test: Cams - 2 MCQs are made for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Cams - 2 below.
Solutions of Test: Cams - 2 questions in English are available as part of our course for Mechanical Engineering & Test: Cams - 2 solutions in Hindi for Mechanical Engineering course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt Test: Cams - 2 | 10 questions in 30 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study for Mechanical Engineering Exam | Download free PDF with solutions
Test: Cams - 2 - Question 1

The angle between the line of stroke (line of motion of the follower) and the normal to the pitch curve at any point, is referred to as

Detailed Solution for Test: Cams - 2 - Question 1

The pressure angle, representing the steepness of the cam profile, is the angle between the normal to the pitch Curve at a point and the direction of the follower motion. If varies in magnitude at all instants of the follower motion. A high value of the maximum pressure angle is not desired as it might jam the follower in the bearings.

Test: Cams - 2 - Question 2

The pressure angle of a cam depends upon
1. lift and type of the follower motion
2. angle of ascent
3. offset between center line
Which of the statements made above are correct?

Detailed Solution for Test: Cams - 2 - Question 2

The pressure angle of a cam is an important parameter in cam design, as it affects the force distribution between the cam and the follower, as well as the wear and tear on the components. Let’s evaluate each statement to determine which ones are correct:

  1. Lift and type of the follower motion: The lift (or stroke) of the follower and the type of follower motion (such as uniform velocity, simple harmonic motion, or cycloidal motion) directly affect the cam profile and, consequently, the pressure angle. Therefore, this statement is correct.

  2. Angle of ascent: The angle of ascent refers to the angle through which the cam rotates while the follower rises. This affects the velocity and acceleration of the follower and thus impacts the pressure angle. Therefore, this statement is also correct.

  3. Offset between center line: If the follower is offset from the center line of the camshaft, it affects the geometry of the cam profile and the pressure angle. Hence, this statement is correct as well.

Since all three factors influence the pressure angle of a cam, the correct answer is: 1, 2, and 3

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Cams - 2 - Question 3

Why is an offset provided in a radial cam - translating follower mechanism?

Test: Cams - 2 - Question 4

Identify the nature of motion in a cam - roller followers system that leads to lowest jerk

Test: Cams - 2 - Question 5

During the dwell period of cam, the follower

Test: Cams - 2 - Question 6

All of the followings are correct, except

Detailed Solution for Test: Cams - 2 - Question 6

In a cam follower system, pitch joint is the point on the pitch curve at which the pressure angle is maximum.

Test: Cams - 2 - Question 7

Pitch point on a cam is

Test: Cams - 2 - Question 8

Which of the following motion of cam roller - follower leads to the lowest jerk?

Test: Cams - 2 - Question 9

An eccentric circular cam of radius 10 cm as shown below rotates at a constant angular speed of 2 rad/s, The eccentricity is 1 cm. The maximum translational speed of the flat face follower is

Detailed Solution for Test: Cams - 2 - Question 9

Maximum speed = eωsinθ
= 1 x 2 x 1 = 2 cm/sec

Test: Cams - 2 - Question 10

In a plate cam mechanism with reciprocating roller follower, the follower has a constant acceleration in the case of

Detailed Solution for Test: Cams - 2 - Question 10

For uniform acceleration and retardation the velocity of the follower must change at a constant rate and hence the velocity diagram of the follower consists of sloping straight lines. The velocity diagram represents everywhere the slope of the displacement diagram, the latter must be a curve whose slope changes at a constant rate. Hence the displacement diagram consists of double parabola.

Information about Test: Cams - 2 Page
In this test you can find the Exam questions for Test: Cams - 2 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Cams - 2, EduRev gives you an ample number of Online tests for practice

Top Courses for Mechanical Engineering

Download as PDF

Top Courses for Mechanical Engineering